Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove from exposure area to fresh air immediately give
artificial respiration, if necessary.

Get medical attention immediately.
Emergency measure - Eyes: Rinse with plenty of water. If irritation occurs, seek
medical advice.
Emergency measure - Skin: Remove contaminated clothing and shoes immediately.

Wash with soap or mild detergent and large amount of water.
Get medical attention, if needed.
Emergency measure - Ingestion: Get medical attention immediately.

Fire-fighting measures

Recommended extinguishing agent: Water, dry powder, foam, carbon dioxide.

Product arising from burning: Water, dry powder, foam, carbon dioxide.

Product determined by test: N

Protective equipment: Wear self-contained breathing apparatus.

Accidental release measures

Emergency measures in case of spillage: Take up the spillage mechanically, if necessary, dam in or
take up beforehand using absorbent material, e.g. kieselgur,
sawdust or sand. Fill material that is taken up into
closable, properly labelled containers. Disposal according
to the local official regulations, e.g. by incineration.

The precautionary measures recommended under 2.3.10 must be
taken.

Do not allow to enter drains or aquatic environments.

Handling and storage

Handling: All working methods must always be designed so that exposure
by skin contact with the substance is minimized. As far as
possible, closed or at least splashproof equipment should be
used during filling and metered feeding as well as during
sampling. To avoid skin contact, tested protective gloves
(e.g. Latex Exam Gloves) and, if applicable, suitable pro-
tective clothing (e.g. Salisbury Arc Flash protective
clothing kits) must be worn. Adequate washing facilities
should be available in the immediate vicinity of the work
area. After skin contact, the affected parts of the skin
should be cleaned thoroughly using (e.g. BestFoam pH skin
neutual). Skin-protection and skin-care measures are re-
commended.

Take precautionary measures against static charges.

Storage: For the storage the original packaging drums or other
unbreakable and correctly labelled containers are to be
used. Keep containers tightly closed and secure by suitable
measures against falling down. Avoid product residues on the
packing drums.

The substance should be stored in well sealed containers.

Packaging of the substance and or preparation: Metal drums, 200 kg.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: Transport in well sealed suitable containers (eg. super-
sacks).

The containers should be secured against falling down.

Label containers in accordance with pertinent regulations.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Not known.

Chemical reaction with water: No dangerous reaction with water.

Dust explosion: Not to be expected if handled under good industrial hygiene
practices.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Not applicable.

Industry - Possibility of neutralisation: Not applicable.

Industry - Possibility of destruction: controlled discharge: Not applicable.

Industry - Possibility of destruction - incineration: Code: 661

Incineration with flue gas scrubling.

Industry - Possibility of destruction - water purification: Code: 641

Removal by controlled discharge to a waste water treatment
plant..

Industry - Possibility of destruction - other: Not applicable.

Public at large - Possibility of recovery/recycling: Not applicable.