Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Move to fresh air. If irritation occurs seek medical
attention.
Emergency measure - Eyes: Remove contact lens, if applicable, and pour a gentle stream
of water over the affected eye for at least 15 minutes.

Seek medical attention.
Emergency measure - Skin: Run a gentle stream of water over the affected area for 15
minutes. A mild soap may be used if available. Seek
medical attention if irritation occurs.
Emergency measure - Ingestion: Seek medical attention

Fire-fighting measures

Recommended extinguishing agent: Water spray, dry chemical

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg oxides of carbon and
nitrogen).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.


Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards, as
mentioned in section 2.3.10.


Absorb spillages of solutions with a suitable inert material
(eg. sand or soil). Carefully transfer the spillage to
waste containers, or use a sealed industrial vacuum
machine. Containers filled with waste material must be
labelled in the same way as the original substance
containers.



Dispose of waste material in accordance with local
regulations preferably by incineration or licensed waste-
disposal operator.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.



When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.



Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical protective clothing to Standard EN368

Eye protection to Standard EN166.


Furthermore, when respiratory equipment has to be used, it
must be capable of adequately controlling exposure, be
suitable for purpose, and conform to the appropriate
international or national standards (eg Standard EN405).


These measures should be regarded as minimum.

Storage: Store in a vented storage tank in a cool, dry, well
ventilated place.

Packaging of the substance and or preparation: 1 tonne stainless steel IBC or 5 tonne stainless steel
isocontainer.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.


For in-plant movement, transport in tightly sealed
containers.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported

Chemical reaction with water: None which is hazardous.

Dust explosion: The substance is a liquid and therefore not a potential dust
explosion hazard.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will not occur during normal
use. Recovery from minor spillages or accidental discharge
is not economically or technically feasible, and such waste
material will be disposed of by incineration.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is
harmful by acute oral ingestion, corrosive and a skin
sensitiser. The substance is very toxic to aquatic
organisms and may have long term adverse effects.


No chemical treatment is practicable to neutralise the
hazardous health properties.


No chemical treatment is practicable to neutralise the
hazardous environmental properties.

Industry - Possibility of destruction: controlled discharge: Not applicable

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon and
nitrogen oxides) could be formed.

Industry - Possibility of destruction - water purification: The substance should not be discharged directly tothe
sewage system or the aqueous environment.

Public at large - Possibility of recovery/recycling: Not applicable as the substance will not be made available
to the public.

Public at large - Possibility of neutralisation: Not applicable as the substance will not be made available
to the public.

Public at large - Possibility of destruction: controlled discharge: Not applicable as the substance will not be made available
to the public.

Public at large - Possibility of destruction - incineration: Not applicable as the substance will not be made available
to the public.

Public at large - Possibility of destruction - water purification: Not applicable as the substance will not be made available
to the public.

Public at large - Possibility of destruction - others: Not applicable as the substance will not be made available
to the public.