Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. Give artificial respiration if
necessary or, if breathing is difficult give oxygen. Seek
immediate medical attention.
Emergency measure - Eyes: Immediately flush eyes with copious amounts of water for at
least 15 minutes. Seek immediate medical attention.
Emergency measure - Skin: Immediately wash affected area with water for at least 15
minutes. Launder contaminated clothing before re-use. Seek
immediate medical attention.
Emergency measure - Ingestion: Seek immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water spray, carbon dioxide, dry chemical powder or
appropriate foam.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon oxides and
chlorine-containing compounds). However, there is no
experimental evidence to support the anticipated combustion
products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.


Absorb spillages with a suitable inert material (eg sand or
soil). Carefully transfer the spillage to waste containers,
or use a sealed industrial vacuum machine. Containers filled
with waste material must be labelled in the same way as the
original containers.


Clean the spillage area with water and detergent.


Dispose of waste material by incineration in accordance with
local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in a
well-ventilated area under conditions of good industrial
hygiene and in conformity with any local regulations in
order to avoid exposure. Avoid breathing vapour and wash
thoroughly after handling.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166


When necessary appropriate respiratory protection should be
used. e.g. a vapour mask conforming to EN405 FFA1.


The standards mentioned above should be regarded as a
minimum.

Storage: Store in a cool, dry, well-ventilated area away from sources
of static discharge.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: UN-compliant containers according to packing instructions
610, Y610 and 618 for UN2689.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: UN2689
Transport: Class 6.1 Toxic Substances, Packing Group II.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None which is hazardous.

Dust explosion: Not applicable to a liquid.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration or landfill. In principle, it
may be possible to recover larger spillages of
uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: No chemical treatment is practicable to neutralise the
hazardous health properties.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon oxides
and chlorine-containing compounds) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: Not applicable.