Registration Dossier

Physical & Chemical properties

Boiling point

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
boiling point
Type of information:
experimental study
Adequacy of study:
key study
Study period:
11/1999 - 01/2000
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
guideline study without detailed documentation
Reference:
Composition 0
Qualifier:
according to
Guideline:
other: EU Method A.1 (determination of the Melting point)
Deviations:
not specified
GLP compliance:
yes
Type of method:
differential scanning calorimetry
Remarks:
and ISTA (Isothermal Step Thermal Analysis)
Test material information:
Composition 1
Decomposition:
yes
Decomp. temp.:
100 °C

- There is no melting point and no boiling point up to the decomposition of the test substance

- Pressure is not reported, but atmospheric pressure can be assumed.

Conclusions:
There is no boiling point up to the decomposition of the test substance at 100°C (EU method A1).
Executive summary:

According to EU method A1, no melting point and thus no boiling point up to the decomposition of Imidoxim at 100°C could be observed. The sample is closed up in a crucible made of glass for each run. First run (DTA): the sample is heated up in steps of 5 K and hold at each temperature for 25 minutes. In comparison with an inert sample (empty crucible) the temperature difference and the heat effect is recorded. Any thermal effect corresponds to a baseline deviation.

Description of key information

There is no boiling point up to the decomposition of Imidoxim at 100°C (EU method A1).

Key value for chemical safety assessment

Boiling point at 101 325 Pa:
100 °C

Additional information

- Should read > 100°C

- Pressure is not reported, but atmospheric pressure can be assumed