Registration Dossier

Diss Factsheets

Physical & Chemical properties

Flash point

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flash point of flammable liquids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
01 September - 07 December 2016
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Remarks:
Study conducted in accordance with international guidelines and in accordance with GLP. All relevant validity criteria were met.
Qualifier:
according to guideline
Guideline:
EU Method A.9 (Flash-Point)
Deviations:
no
Qualifier:
according to guideline
Guideline:
ASTM D93 (Standard test methods for flash point by pensky-martens closed cup tester)
Deviations:
no
Qualifier:
according to guideline
Guideline:
ISO 3679 (Determination of flash point - Rapid equilibrium closed cup method)
Deviations:
no
Qualifier:
according to guideline
Guideline:
ISO 2719 (Determination of flash point - Pensky-Martens closed cup method)
Deviations:
no
Qualifier:
according to guideline
Guideline:
other: ASTM International, ASTM D7094: “Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester”, 2012.
Deviations:
no
Qualifier:
according to guideline
Guideline:
other: United Nations (UN), UN no. ST/SG/AC.10/11/Rev.6: Recommendations on the Transport of Dangerous Goods, Part III: “Non-Viscous Flammable Liquids”, 2015.
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Type of method:
closed cup
Flash point apparatus:
other: EraFlash flash-point tester (Eralytics, Vienna, Austria)
Specific details on test material used for the study:
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: Room temperature
- Stability under test conditions: Assumed stable. Stability at higher temperatures not availbale.
- Solubility and stability of the test substance in the solvent/vehicle: N/A
- Reactivity of the test substance with the solvent/vehicle of the cell culture medium: N/A
Key result
Flash point:
104 °C
Atm. press.:
101.325 kPa

Prelim Test

The estimated flash-point of the test substance was 102 ºC.

Main Test

Table 1:       Flash-point of the test substance

Test

Flash-point

[°C]

Lowest flash-point

[°C]

1

104

104

2

104

 

Interpretation of results:
GHS criteria not met
Conclusions:
The closed cup method was applied for the determination of the flash-point of the test substance. The flash-point of the test substance was 104 °C.
Executive summary:

The flash-point of the test substance was determined using the closed cup method in accordance with Iso Guide 2719 (2002).

The flash-point of the test substance was determined to be 104 ºC.

 

Description of key information

Flash Point: 104 ºC, ISO Guide 2719 (2002) - closed cup method, Anon, 2017.

Key value for chemical safety assessment

Flash point at 101 325 Pa:
104 °C

Additional information

The flash-point of the test substance was determined using the closed cup method in accordance with Iso Guide 2719 (2002). The flash-point of the test substance was determined to be 104 ºC.

The substance did not meet the classification & labelling criteria for a flammable liquid in accordance with Regulation (EC) No 1272/2008.