Registration Dossier

Administrative data

First-aid measures

First aid measures
General: Get medical advice/attention if you feel unwell.

Description of first aid measures
- Inhalation: If breathing is difficult, give oxygen. Remove to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER/doctor/…
- Eye contact: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER/doctor if you feel unwell.
- Skin Contact: Take off immediately all contaminated clothing. Take off contaminated clothing and wash before re-use. Wash skin thoroughly with soap and
water. Call a POISON CENTER/doctor if you feel unwell. Launder contaminated clothing before reuse.
- Ingestion: Rinse mouth. Immediately call a POISON CENTER/doctor.

Most important symptoms and effects, both acute and delayed:
See section “Toxicological Information”.

Indication of any immediate medical attention and special treatment needed
Hazards: No data available.
Treatment: Treat symptomatically.

Fire-fighting measures

General Fire Hazards: No unusual fire or explosion hazards noted.

Extinguishing media Suitable extinguishing media:
Use water spray, dry chemical or foam for extinction. CO2 may be ineffective on large fires.
Unsuitable extinguishing media: Do not use water jet as an extinguisher, as this will spread the fire.

Special hazards arising from the substance or mixture:
A solid stream of water will spread the burning material. Material creates a special hazard because it floats on water. See section 10 for additional
information.

Advice for firefighters Special fire fighting procedures:
This product has not been evaluated for dust explosion potential. Powdered material may form explosive dust-air mixtures. Take care to minimze airborne dust. This product has a high volume resistivity and a propensity to build up static electricity which may be discharged as a spark. A spark can be an ignition source for solvent vapor/air mixtures. If you add this product to a solvent, ensure appropriate safe handling practices such as provision for inerting flammable vapors.

Special protective equipment for fire-fighters:
Wear full protective firegear including self-containing breathing apparatus operated in the positive pressure mode with full facepiece, coat, pants, gloves and boots.

Accidental release measures

Accidental release measures
Personal precautions, protective equipment and emergency procedures:
Ventilate closed spaces before entering them. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Keep upwind. Keep unauthorized personnel away. See Section “Exposure Controls/Personal Protection” of the SDS for Personal Protective Equipment. Personal Protective Equipment must be worn, see Personal Protection Section for PPE recommendations.

Environmental Precautions:
Prevent further leakage or spillage if safe to do so. Prevent entry into sewers and waterways. Take precautions to avoid release to the environment.

Methods and material for containment and cleaning up:
Pick up free solid for recycle and/or disposal. Collect powder using special dust vacuum cleaner with particle filter or carefully sweep into closed container. Stop the flow of material, if this is without risk. Prevent entry into waterways, sewer, basements or confined areas.

Reference to other sections:
See sections “Exposure Controls/Personal Protection” and “Disposal Considerations” for additional information

Handling and storage

Precautions for safe handling:
Do not breathe dust/fume/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Observe good industrial hygiene practices. Use only in well-ventilated areas. Wear appropriate personal protective equipment.
Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Launder contaminated clothing before reuse. Avoid environmental contamination. Avoid conditions which create dust. Avoid breathing dust. Avoid contact with eyes and prolonged or repeated contact with skin. Keep away from heat, sparks and open flame.

Maximum Handling Temperature:
Not determined.

Conditions for safe storage, including any incompatibilities:
Keep container tightly closed. Store in a well-ventilated place. Store in a dry, well-ventilated place. Keep containers closed when not in use.

Maximum Storage Temperature:
Not determined.

Specific end use(s): End uses are listed in an attached exposure scenario when one is required.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls/personal protection
Control Parameters Occupational Exposure Limits
None of the components have assigned exposure limits.

Exposure controls Appropriate engineering controls:
Minimize dust generation and accumulation. Provide adequate ventilation.

Individual protection measures, such as personal protective equipment General information: Provide easy access to water supply and eye wash facilities. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Eye/face protection: Safety glasses. If potential for splash or mist exists, wear chemical goggles or faceshield. Wear approved chemical safety glasses or goggles where eye exposure is reasonably probable.

Skin protection
Hand Protection: Suitable gloves can be recommended by the glove supplier. Use good industrial hygiene practices to avoid skin contact. If contact with the material may occur wear chemically protective gloves.
Other: Wear apron or protective clothing in case of contact. Long sleeve shirt is recommended.

Respiratory Protection: A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator. Use respirator with a dust/mist cartridge if the recommended exposure limit is exceeded. Under normal use conditions, respirator is not
usually required. Use appropriate respiratory protection if exposure to dust particles, mist or vapors is likely.

Hygiene measures: Observe good industrial hygiene practices. Do not breathe dust/fume/gas/mist/vapors/spray. Do not eat, drink or smoke when using the product. Avoid contact with skin. Wash contaminated clothing before reuse. Wash hands before breaks and immediately after handling the product. Wash thoroughly after handling.

Environmental Controls:
No data available.
See section “Accidental Release Measures” for details.

Stability and reactivity

Stability and reactivity
Reactivity: No data available.

Chemical Stability: Material is stable under normal conditions.

Possibility of hazardous reactions: Will not occur.

Conditions to avoid: Static discharge.

Incompatible Materials: Strong oxidizing agents. Strong reducing agents.

Hazardous Decomposition Products:
Thermal decomposition or combustion may generate smoke, carbon monoxide, carbon dioxide , nitrogen oxides, and other products of incomplete combustion.

Disposal considerations

Waste treatment methods
Disposal methods: Treatment, storage, transportation, and disposal must be in accordance with applicable Federal, State/Provincial, and Local regulations.
Dispose of packaging or containers in accordance with local, regional, national and international regulations. Empty container contains product residue which may exhibit hazards of product.

Contaminated Packaging: Container packaging may exhibit hazards.