Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 618-561-0
CAS number: 9046-10-0
General advice :
Move out of dangerous area.
Consult a physician.
Show this safety data sheet to the doctor in attendance.
Get medical attention if symptoms occur.
If inhaled :
If inhaled, remove to fresh air.
In case of skin contact :
Immediate medical treatment is necessary as untreated
wounds from corrosion of the skin heal slowly and with difficulty.
If on skin, rinse well with water.
If on clothes, remove clothes.
In case of eye contact :
Small amounts splashed into eyes can cause irreversible
tissue damage and blindness.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Continue rinsing eyes during transport to hospital.
Remove contact lenses.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed :
Keep respiratory tract clear.
Do NOT induce vomiting.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
Take victim immediately to hospital.
Suitable extinguishing media :
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable extinguishing media :
High volume water jet
Specific hazards during firefighting :
Do not allow run-off from fire fighting to enter drains or water courses.
Hazardous combustion products :
No hazardous combustion products are known
Special protective equipment for firefighters :
Wear self-contained breathing apparatus for firefighting if necessary.
Specific extinguishing methods :
No data is available on the product itself.
Further information :
Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Personal precautions :
Use personal protective equipment.
Environmental precautions :
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform respective authorities.
Methods for cleaning up :
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
Advice on safe handling :
Do not breathe vapours/dust.
Avoid contact with skin and eyes.
Smoking, eating and drinking should be prohibited in the application area.
To avoid spills during handling keep bottle on a metal tray.
Dispose of rinse water in accordance with local and national regulations.
Advice on protection against fire and explosion :
Normal measures for preventive fire protection.
Hygiene measures :
When using do not eat or drink. When using do not smoke.
Wash hands before breaks and at the end of workday.
Requirements for storage areas and containers :
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Observe label precautions. Keep in properly labelled containers.
Recommended storage temperature :
2 - 40 °C
Further information on storage stability :
Stable under normal conditions.
Eye protection :
Eye wash bottle with pure water
Tightly fitting safety goggles
Wear face-shield and protective suit for abnormal processing problems.
Material : butyl-rubber
Break through time : > 8 h
Material : Nitrile rubber
Break through time : > 480 min
Glove thickness : 0,85 mm
Material : PVC
Break through time : 230 min
Remarks : The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Skin and body protection :
Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Respiratory protection :
No personal respiratory protective equipment normally required
No dangerous reaction known under conditions of normal use.
Chemical stability :
Hazardous reactions :
No hazards to be specially mentioned.
Conditions to avoid :
Materials to avoid :
Hazardous decomposition products :
Carbon dioxide (CO2)
Nitrogen oxides (NOx)
The product should not be allowed to enter drains, water courses or the soil.
Do not contaminate ponds, waterways or ditches with chemical or used container.
Send to a licensed waste management company.
Dispose of as hazardous waste in compliance with local and national regulations.
Dispose of contents/ container to an approved waste disposal plant.
Contaminated packaging :
Empty remaining contents.
Dispose of as unused product.
Do not re-use empty containers.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
På den här webbplatsen används kakor. Syftet är att optimera din upplevelse av den.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again