2-ethylhexanoic acid, manganese salt

Basic toxicokinetics

Administrative data

Endpoint:

basic toxicokinetics in vitro / ex vivo

Remarks:

Bioelution in simulated interstitial medium

Type of information:

experimental study

Adequacy of study:

key study

Study period:

10 December 2021 to 12 February 2022

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

test procedure in accordance with generally accepted scientific standards and described in sufficient detail

Data source

Reference

Reference Type:

study report

Title:

Unnamed

Year:

2022

Report date:

2022

Materials and methods

Test guideline

Qualifier:

no guideline available

Principles of method if other than guideline:

Bioelution in simulated interstitial medium according to Standard Operating Procedure for the Bio-accessibility Testing Programme of Eurometaux (November 10, 2010).

GLP compliance:

yes (incl. QA statement)

Test material

Test material information

Constituent 1

Reference substance name:

2-ethylhexanoic acid, manganese salt

EC Number:

240-085-3

EC Name:

2-ethylhexanoic acid, manganese salt

Cas Number:

15956-58-8

Molecular formula:

C8H16O2.xMn

IUPAC Name:

2-ethylhexanoic acid, manganese salt

Test material form:

solid

Remarks:

±1 cm lumps

Details on test material:

Supplier: Borchers sas
CAS Number: 15956-58-8
Batch/Lot number: 21100801LH
Appearance: Solid brown
Purity: ca. 96%
Metal content: 15.19% Mn
Expiry date: 08 November 2022

Specific details on test material used for the study:

The test item, 2-ethylhexanoic acid, manganese salt as received, are lumps of about 1 cm. To be usable for the tests, a partial sample were ground with a small laboratory mill and then sieved through a 1 mm nylon sieve. The fraction passing through the sieve was used to perform this test.

Administration / exposure

Vehicle:

other: simulated interstitial fluid

Duration and frequency of treatment / exposure:

168 hours

Positive control reference chemical:

1001 mg/L Manganese standard

Results and discussion

Bioaccessibility (or Bioavailability)

Bioaccessibility (or Bioavailability) testing results:

Bio-elution refers to the in vitro extraction methods used to measure the degree to which a substance is dissolved in simulated biological fluids. The resulting value is the “bio-accessibility” and is defined as the “fraction of a substance that is soluble under physiological conditions and therefore potentially available for absorption into systemic circulation”. Simulated biological fluids (e.g. gastric fluid, interstitial fluid, lysosomal fluid,…) represents relevant exposure routes. In this study, the inhalation route was investigated. Therefore, simulated interstitial fluid, as provided in the test guidance, was used to measure the release/dissolution of manganese from 2-ethylhexanoic acid, manganese salt.

The temperature of the sampled test solutions fluctuated between 36.8 °C and 37.0 °C, which was in line with the test conditions of 37 °C ± 1 °C.
The measured pH of the test medium at the start of the test was 7.43, i.e. within the specifications of pH 7.4 ± 0.2. At the start of the trial, the pH measured in the additional test item vessel (replica X) was 7.51, i.e. within the specifications of pH 7.4 ± 0.2. At the sampling points, the pH in the blank control vessel and positive control were between 7.41 and 7.44. The pH in the test vessels was between 7.42 and 7.53 at the 24 hours and 168 hours sampling points.

Measurements of the blank control vessels showed no manganese concentrations above the reporting limit of 20 μg/L Mn in the high salt loaded matrix.

The following observations could be made in the Positive Control item vessel containing a soluble form of manganese:
- The Positive Control item solution remained clear at the tested concentration level. No precipitation could be observed on the filter and in the Erlenmeyer flask at the end of the experiment.
- The recovery of the dissolved manganese concentrations in the positive control item was 100 % for Mn at the 24 hours sampling point and 97 % for Mn at the 168 hours endpoint, respectively and met the criterion (recovery: 100 % ± 10 %) as indicated in the SOP. (Annex 1)

The following observations could be made in the test vessels with a loading of 2 g/L 2-ethylhexanoic acid, manganese salt:
- A white deposit could be observed when adding the test medium to the test item. Undissolved test item (brown particles) could be observed in the Erlenmeyer flasks at the end of the experiment.
- Following amounts of manganese were measured:
1. 24 hours sampling point:
An average dissolved manganese concentration in solution of 78.5 ± 1.2 mg/L Mn (corresponding to a dissolved manganese concentration per g test item of 39.1 ± 0.5 mg/g Mn) was measured after 24 hours of exposure to the simulated interstitial fluid (pH 7.4) with a between-vessel variation of 1 %.
Based on the manganese content of the test item (i.e. 15.19 % Mn) and the average dissolved manganese concentration, a manganese release of 26 % could be calculated at the 24 hours sampling point.
2. 168 hours endpoint:
An average dissolved manganese concentration in solution of 33.2 ± 1.9 mg/L Mn (corresponding to a dissolved manganese concentration per g test item of 16.6 ± 0.9 mg/g Mn) was measured after 168 hours of exposure to the simulated interstitial fluid (pH 7.4) with a between-vessel variation of 6 %, which met the <20 % quality criterion at the 168 hours endpoint.
Based on the manganese content of the test item (i.e. 15.19 % Mn) and the average dissolved manganese concentration, a manganese release of 11 % could be calculated at the 168 hours endpoint.

Applicant's summary and conclusion

Conclusions:

During this study on 2-ethylhexanoic acid, manganese salt at a loading of 2 g/L in simulated interstitial fluid (pH 7.4), it was shown that for manganese, an average dissolved concentration in solution of 78.5 mg/L Mn (CVbetween-vessel = 1 %; N = 3) was found after 24 hours of extraction. This amount corresponds to a dissolved manganese concentration per g test item of 39.1 mg/g Mn or a manganese release of 26 % of the content.
At the 168 hours endpoint, an average value of 33.2 mg/L Mn (CVbetween-vessel = 6 %; N = 3) corresponding to a dissolved manganese concentration per g test item of 16.6 mg/g Mn was found or a manganese release of 11 % of the content.
The results are reliable since the test conditions stayed constant during the experiment and the recovery of the Positive Control met the criteria of acceptance for manganese.

Executive summary:

Bio-elution refers to the in vitro extraction methods used to measure the degree to which a substance (e.g., metal or mineral ion) is dissolved in artificial biological fluids. This study measured the release/ dissolution of manganese ions from 2-ethylhexanoic acid, manganese salt in a simulated interstitial fluid. Simulated biological fluids represent relevant exposure routes. The resulting value is the “bio-accessibility” and is defined as the “fraction of a substance that is soluble under physiological conditions and therefore potentially available for absorption into systemic circulation”. 

The objective of this study was to obtain knowledge about the bio-elution characteristics of 2-ethylhexanoic acid, manganese salt in simulated interstitial fluid. This study has been conducted following the recommended Standard Operating Procedure (SOP) for the Bio-accessibility Testing Programme of Eurometaux (November 10, 2010). 

The extent of dissolution of 2-ethylhexanoic acid, manganese salt was tested in a simulated interstitial fluid at 37 °C and pH 7.4 during 168 hours (2 g/L loadings) at an agitation speed of 171 revolutions per minute (rpm). The bio-elution endpoint is based on the dissolved manganese (Mn) concentrations obtained after 24 and 168 hours of extraction. 

The measured pH of the test medium at the start of the test was 7.43, i.e. within the specifications of pH 7.4 ± 0.2. At the start of the trial, the pH measured in the additional test item vessel (replica X) was 7.51, i.e. within the specifications of pH 7.4 ± 0.2. At the sampling points, the pH in the blank control vessel and positive control were between 7.41 and 7.44. The pH in the test vessels was between 7.42 and 7.53 at the 24 hours and 168 hours sampling points. 

The temperature of the sampled test solutions, including the blank test vessel, was between 36.8 °C and 37.0 °C and corresponded to the required test conditions of 37 °C ± 1 °C. 

Measurements of the blank control vessels showed no manganese concentrations above the reporting limit of 20 μg/L Mn in the high salt loaded matrix. 

In the test item vessels with a loading of 2 g/L 2-ethylhexanoic acid, manganese salt at the 24 hours sampling point, the following average dissolved manganese concentration in solution of: 

• 78.5 ± 1.2 mg/L Mn (CVbetween-vessel = 1 %; N = 3), corresponding to a dissolved manganese concen-tration per g test item of 39.1 ± 0.5 mg/g Mn, 

was measured after 24 hours of exposure to the simulated interstitial fluid (pH 7.4). 

Based on the manganese content (i.e. 15.19 % Mn) in the test item and the average dissolved manganese concentrations in the test solutions, a release of: 

• manganese of 26 % of the content, 

could be calculated at the 24 hours sampling point. 

 

In the test item vessels with a loading of 2 g/L 2-ethylhexanoic acid, manganese salt at the 168 hours endpoint, the following average dissolved manganese concentration in solution of: 

• 33.2 ± 1.9 mg/L Mn (CVbetween-vessel = 6 %; N = 3), corresponding to a dissolved manganese concen-tration per g test item of 16.6 ± 0.9 mg/g Mn, 

was measured after 168 hours of exposure to the simulated interstitial fluid (pH 7.4). 

Based on the manganese content (i.e. 15.19 % Mn) in the test item and the average dissolved manganese concentrations in the test solutions, a release of: 

• manganese of 11 % of the content, 

could be calculated at the 168 hours endpoint.