Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 200-300-3
CAS number: 56-93-9
When using do not eat or drink
Do not breathe dust
Do not get in eyes, on skin, or on clothing
Harmful if swallowed
Irritating to eyes and skin
Low acute oral toxicity although ingestion will cause irritation of the gastrointestinal tract
and may result in nausea and diarrhea. May cause mild mechanical irritation to eyes, skin
and mucous membranes. May cause irritation from allergic reaction, especially to people
that have a history of allergic reaction.
Do not delay. Rinse immediately with plenty of water, also under the eyelids, for at least 15
minutes. Call a physician immediately.
Remove and wash contaminated clothing before re-use. Wash off immediately with soap
and plenty of water.
Do not delay. Do not induce vomiting without medical advice. If ingested can lead to
irritation of the mouth, irritation of the throat, irritation of the digestive tract, vomiting. Clean
mouth with water and afterwards drink plenty of water. Never give anything by mouth to an
unconscious person. If breathing but unconscious, place in the recovery position. The
below results are based on testing performed on representative samples of a mixture
similar to this product.
Move to fresh air. If symptoms persist, call a physician.
Protection of FIrst-aiders:
Avoid breathing dust or vapor. Avoid contact with skin, eyes and clothing.
Suitable Extinguishing Media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. alcohol-resistant foam.
Contains organic solvents. Water spray. Dry chemical. Dry powder.
Specific Hazards Arising from the Chemical
Hazardous combustion products. Carbon dioxide (CO2), carbon monoxide (CO), oxides of nitrogen (NOx), dense black smoke.
Hydrogen chloride gas.
Protective Equipment and Precautions for Firefighters
Standard procedure for chemical fires. Evacuate personnel to safe areas. Evacuate area and fight fire from a safe distance. Wear
self contained breathing apparatus for fire fighting if necessary. Keep containers and surroundings cool with water spray.
Personal precautions, protective equipment and emergency procedures:
Avoid contact with skin, eyes and clothing. Do not breathe dust.
Prevent further leakage or spillage if safe to do so. Do not allow material to contaminate ground water system. Try to prevent the
material from entering drains or water courses. Local authorities should be advised if significant spillages cannot be contained.
Methods and materials for containment and cleaning up:
Prevent spreading over a wide area (e.g. by containment or oil barriers)
Pick up and transfer to properly labelled containers. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder,
universal binder, sawdust). Prevent product from entering drains.
Avoid contact with skin, eyes and clothing. Do not eat, drink or smoke when using this product. Avoid dust formation. Do not
breathe dust. Remove and wash contaminated clothing before re-use.
Keep container tightly closed in a dry and well-ventilated place. Keep away from heat. Polyethylene containers.
The product does not contain any hazardous materials with occupational exposure limits established.
Engineering Measures: Use only in well-ventilated areas.
Personal Protective Equipment:
Eye Protection: Wear safety glasses or full face shield if splashes are likely to occur.
Skin Protection: Long sleeved clothing.
Hand Protection: Neoprene gloves. Nitrile rubber. PVC disposable gloves.
Respiratory protection: Respirator must be worn if exposed to dust.
Other Protective Equipment :Ensure that eyewash stations and safety showers are close to the workstation location
General Hygiene Considerations: Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash hands before breaks and immediately after handling the product.
Environmental Exposure Controls: Prevent product from entering drains. Do not allow material to contaminate ground water system. Local authorities should be advised if significant spillages cannot be contained.
Stability: Stable under normal conditions
Hazardous Reactions: None under normal processing
Conditions to Avoid: Heat, flames and sparks. Temperatures above 135°C.
Materials to Avoid: Strong oxidizing agents. Strong bases.
Hazardous Decomposition Products: Hazardous combustion products, Nitrogen oxides (NOx), Carbon monoxide, hydrogen
Waste Disposal Methods:
Where possible recycling is preferred to disposal or incineration
Should not be released into the environment
Can be incinerated, when in compliance with local regulations
Waste from Residues / Unused Products:
Dispose of in accordance with local regulations
Treat rinsing as for product disposal
Empty remaining contents
Triple rinse containers
Empty containers should be taken to an approved waste handling site for recycling or disposal
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again