Registration Dossier

Administrative data

First-aid measures

General advice:
Move out of dangerous area. Remove contaminated clothing immediately and dispose of safely. Place and transport victim in stable position (lying sideways).

Inhalation:
Move to fresh air. Keep patient warm and at rest. Call a physician or poison control center immediately.

Skin contact:
In case of contact with skin wash off immediately with polyethylene glycol 400, then withplenty of water. Call a physician or poison control center immediately.

Eye contact:
In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Call a physician or poison control center immediately.

Ingestion:
Do NOT induce vomiting. Rinse mouth. Call a physician or poison control center immediately.


Notes to Physician:
Treat symptomatically.

Fire-fighting measures

Suitable Extinguishing Media: Carbon dioxide (CO2), Foam, Sand, Water spray

Specific hazards during fire fighting:
In the event of fire the following can be released: carbon monoxide (CO),

Special protective equipment for fire-fighters:
In the event of fire and/or explosion do not breathe fumes.
In the event of fire, wear self-contained breathing apparatus.

Further information:
Contain the spread of the fire-fighting media.
Do not allow run-off from fire fighting to enter drains or water courses.

Accidental release measures

Personal Precautions:
Avoid contact with spilled product or contaminated surfaces.
Use personal protective equipment.

Environmental Precautions:
Do not allow to get into surface water, drains and ground water.

Methods for Cleaning Up:
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder).
Clean contaminated floors and objects thoroughly, observing environmental regulations.
Keep in suitable, closed containers for disposal.

Handling and storage

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.

Advice on safe handling:
Use only in area provided with appropriate exhaust ventilation.
Advice on protection against fire and explosion
Keep away from heat and sources of ignition.

Storage:

Requirements for storage areas and containers:
Keep containers tightly closed in a dry, cool and well-ventilated place.
Store in original container.
Store in a place accessible by authorized persons only.

Advice on common storage:
Keep away from food, drink and animal feedingstuffs.
Suitable materials
Only use containers that are approved specifically for the product.

Transport information

Land transport (ADR/RID)

UN number:
3265
Proper shipping name and description:
CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
(2,6-DIMETHYLINDAN-1-ONE)
Chemical name:
2,3-Dihydro-2,6-dimethyl-1H-inden-1-one
Language:
English
Class:
8
Classification code:
C3
Packaging group:
II
Labels:
8
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
3265
Proper shipping name and description:
CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
(2,6-DIMETHYLINDAN-1-ONE)
Chemical name:
2,3-Dihydro-2,6-dimethyl-1H-inden-1-one
Class:
8
Classification code:
C3
Packaging group:
II
Labels:
8
Remarksopen allclose all

Marine transport (IMDG)

UN number:
3265
Proper shipping name and description:
CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
(2,6-DIMETHYLINDAN-1-ONE)
Chemical name:
2,3-Dihydro-2,6-dimethyl-1H-inden-1-one
Class:
8
Packaging group:
II
EmS code:
F-A, S-B
Labels:
8
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
3265
Proper shipping name and description:
CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
(2,6-DIMETHYLINDAN-1-ONE)
Chemical name:
2,3-Dihydro-2,6-dimethyl-1H-inden-1-one
Class:
8
Packaging group:
II
Labels:
8
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.

Respiratory Protection: If product is handled while not enclosed, and if contact may occur: Wear respirator with an organic vapours and gas filter mask (protection factor 10) conforming to EN140 type A or equivalent. Respiratory protection should only be used to control residual risk of
short duration activities, when all reasonably practicable steps have been taken to reduce exposure at source e.g. containment and/or local extract ventilation. Always follow respirator manufacturer's instructions regarding wearing and maintenance.

Hand Protection: Wear CE Marked (or equivalent) nitrile rubber gloves (minimum thickness 0,40 mm). Wash when contaminated. Dispose of when
contaminated inside, when perforated or when contamination outside cannot be removed. Wash hands always before eating, drinking, smoking or using the toilet.

Eye protection:Wear goggles conforming to EN166 (Field of Use 5 or equivalent).

Skin and body protection: Wear standard coverall and type 3 suit. Wear two layers of clothing wherever possible. Polyester/cotton or cotton overalls should be worn under chemical protection suit and should be professionally laundered frequently. If chemical protection suit is splashed, sprayed or significantly contaminated, decontaminate as far as possible, then carefully remove and dispose of as advised by manufacturer.

Hygiene measures:
Avoid contact with skin, eyes and clothing.
Keep working clothes separately.
Wash hands immediately after work, if necessary take a shower.
Remove soiled clothing immediately and clean thoroughly before using again.
Garments that cannot be cleaned must be destroyed (burnt).
Wash hands before breaks and immediately after handling the product.

Protective measures:
If product is handled while not enclosed, and if contact may occur:
Complete suit protecting against chemicals

Stability and reactivity

No hazardous reactions when stored and handled according to
prescribed instructions.

Disposal considerations

In accordance with current regulations and, if necessary, after consultation with the site operator and/or with the responsible authority, the product may be taken to a waste disposal site or incineration plant.