Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-990-9 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
General Advice
- contains milk, may trigger an allergic reaction
Eye contact
- rinse cautiously with tap water for several minutes - open eyelids forcibly
- remove contact lenses, if present and easy to do. Continue rinsing
- immediately call a POISON CENTER/ doctor
Skin contact
- remove immediately contaminated clothes, wash affected skin with plenty of water and soap
- if skin irritation or rash occurs: Get medical advice/attention
Inhalation
- Remove person to fresh air and keep comfortable for breathing
- If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.
Most important symptoms and effects, both acute and delayed:
- causes skin irritation
- may cause allergy or asthma symptoms or breathing difficulties if inhaled
- causes serious eye damage
Indication of any immediate medical attention and special treatment needed - Note to physician:
- treat symptomatically
- because of its high milk protein content allergic reactions may occur in sensitive individuals
- contains milk, may trigger an allergic reaction
Eye contact
- rinse cautiously with tap water for several minutes - open eyelids forcibly
- remove contact lenses, if present and easy to do. Continue rinsing
- immediately call a POISON CENTER/ doctor
Skin contact
- remove immediately contaminated clothes, wash affected skin with plenty of water and soap
- if skin irritation or rash occurs: Get medical advice/attention
Inhalation
- Remove person to fresh air and keep comfortable for breathing
- If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.
Most important symptoms and effects, both acute and delayed:
- causes skin irritation
- may cause allergy or asthma symptoms or breathing difficulties if inhaled
- causes serious eye damage
Indication of any immediate medical attention and special treatment needed - Note to physician:
- treat symptomatically
- because of its high milk protein content allergic reactions may occur in sensitive individuals
Fire-fighting measures
Suitable extinguishing media
- Water Spray Jet, Foam, ABC-Powder, CO2. Extinguish starting at the edge of the fire
Special fire fighting procedures:
- use breathing apparatus with independent air supply
Advice for firefighters - Protection of fire-fighters:
- use self-contained breathing apparatus
- limit the action force in the danger area
- avoid generating dust; fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Hazardous Decomposition Products:
Carbone monoxide (CO) and carbon dioxide (CO2)
- Water Spray Jet, Foam, ABC-Powder, CO2. Extinguish starting at the edge of the fire
Special fire fighting procedures:
- use breathing apparatus with independent air supply
Advice for firefighters - Protection of fire-fighters:
- use self-contained breathing apparatus
- limit the action force in the danger area
- avoid generating dust; fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Hazardous Decomposition Products:
Carbone monoxide (CO) and carbon dioxide (CO2)
Accidental release measures
Personal precautions, protective equipment and emergency procedures:
- dust Deposits should not be allowed to accumulate on surfaces, as these may form an explosive mixture if they are released into the atmosphere in sufficient concentration.
- avoid dispersal of dust in the air (i.e., clearing dust surfaces with compressed air).
- nonsparking tools should be used.
- use personal protective equipment
- avoid eye and skin contact
- keep away from ignition sources
- do not smoke while handling
- ensure adequate ventilation
- take precautionary meausures against electrostatic loading
Enviromental precautions:
- contain spillage
Methods and materials for clean up:
- clean contaminated area thoroughly according to local regulations
- dust Deposits should not be allowed to accumulate on surfaces, as these may form an explosive mixture if they are released into the atmosphere in sufficient concentration.
- avoid dispersal of dust in the air (i.e., clearing dust surfaces with compressed air).
- nonsparking tools should be used.
- use personal protective equipment
- avoid eye and skin contact
- keep away from ignition sources
- do not smoke while handling
- ensure adequate ventilation
- take precautionary meausures against electrostatic loading
Enviromental precautions:
- contain spillage
Methods and materials for clean up:
- clean contaminated area thoroughly according to local regulations
Handling and storage
Precautions for safe handling:
- Minimize dust generation and accumulation.
- Routine housekeeping should be instituted to ensure that dusts do not accumulate on surfaces.
- Dry powders can build static electricity charges when subjected to the friction of transfer and mixing operations. Provide adequate precautions, such as electrical grounding and bonding, or inert atmospheres.
- use personal protective clothing
- avoid eye and skin contact
- keep away from ignition sources
- do not smoke while handling
- ensure adequate ventilation
- take precautionary meausures against electrostatic loading
Conditions for safe storage, including any incompatibilities:
- store in cool, dry, well-ventilated environment
- Minimize dust generation and accumulation.
- Routine housekeeping should be instituted to ensure that dusts do not accumulate on surfaces.
- Dry powders can build static electricity charges when subjected to the friction of transfer and mixing operations. Provide adequate precautions, such as electrical grounding and bonding, or inert atmospheres.
- use personal protective clothing
- avoid eye and skin contact
- keep away from ignition sources
- do not smoke while handling
- ensure adequate ventilation
- take precautionary meausures against electrostatic loading
Conditions for safe storage, including any incompatibilities:
- store in cool, dry, well-ventilated environment
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Technical protection:
- It is recommended that all dust control equipment such as local exhaust ventilation and material transport systems involved in handling of this product contain explosion relief vents or an explosion suppression system or an oxygendeficient environment.
- Ensure that dust-handling systems (such as exhaust ducts, dust collectors, vessels, and processing equipment) are designed in a manner to prevent the escape of dust into the work area (i.e., there is no leakage from the equipment).
Organisational measures:
- Permit to work for maintenance work;
- Access restriction to certain/specific workplaces
- General good hygiene and housekeeping; Personal hygiene
- Regular cleaning of equipment and work area;
- Limitation of quantity used / applied per time unit
- Hazardous area classification
- Employment restrictions for pregnant workers, workers who have recently given birth and nursing mothers in accordance with Directive 92/85/EEC and the respective national provisions are to be observed.
- Any measure to eliminate exposure should be considered;
- Very high level of containment required, except for short term exposures e.g. taking samples;
- Design closed system to allow for easy maintenance;
- If possible keep equipment under negative pressure;
- Ensure all equipment well maintained;
- Management/supervision in place to check that the RMMs in place are being used correctly and OCs followed;
- Training for staff on good practice;
- Procedures and training for emergency decontamination and disposal;
- Recording of any 'near miss' situations.
General protective and hygiene measures:
- keep away from foodstuffs, beverages and feed
- ensure good ventilation/exhaustion at the workplace
- avoid contact with skin, eyes and clothing
- wash contaminated clothing before reuse
- avoid breathing dust/fume/gas/mist/vapours/spray
Respiratory protection:
- in case of brief exposure or low concentrations use dust mask
- in case of intensive or longer exposure use self-contained respiratory protective device in accordance with the standard EN143
Hand protection:
- protective gloves (Protective gloves must be compliant with the specifications of EU Directive 89/686/EEC and be in accordance with the standard EN374. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.)
Eye protection:
- tightly fitting safety goggles
Body protection:
- protective clothing
- It is recommended that all dust control equipment such as local exhaust ventilation and material transport systems involved in handling of this product contain explosion relief vents or an explosion suppression system or an oxygendeficient environment.
- Ensure that dust-handling systems (such as exhaust ducts, dust collectors, vessels, and processing equipment) are designed in a manner to prevent the escape of dust into the work area (i.e., there is no leakage from the equipment).
Organisational measures:
- Permit to work for maintenance work;
- Access restriction to certain/specific workplaces
- General good hygiene and housekeeping; Personal hygiene
- Regular cleaning of equipment and work area;
- Limitation of quantity used / applied per time unit
- Hazardous area classification
- Employment restrictions for pregnant workers, workers who have recently given birth and nursing mothers in accordance with Directive 92/85/EEC and the respective national provisions are to be observed.
- Any measure to eliminate exposure should be considered;
- Very high level of containment required, except for short term exposures e.g. taking samples;
- Design closed system to allow for easy maintenance;
- If possible keep equipment under negative pressure;
- Ensure all equipment well maintained;
- Management/supervision in place to check that the RMMs in place are being used correctly and OCs followed;
- Training for staff on good practice;
- Procedures and training for emergency decontamination and disposal;
- Recording of any 'near miss' situations.
General protective and hygiene measures:
- keep away from foodstuffs, beverages and feed
- ensure good ventilation/exhaustion at the workplace
- avoid contact with skin, eyes and clothing
- wash contaminated clothing before reuse
- avoid breathing dust/fume/gas/mist/vapours/spray
Respiratory protection:
- in case of brief exposure or low concentrations use dust mask
- in case of intensive or longer exposure use self-contained respiratory protective device in accordance with the standard EN143
Hand protection:
- protective gloves (Protective gloves must be compliant with the specifications of EU Directive 89/686/EEC and be in accordance with the standard EN374. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.)
Eye protection:
- tightly fitting safety goggles
Body protection:
- protective clothing
Stability and reactivity
Reactivity:
- none at recommended storage conditions
Chemical stability:
- stable under recommended storage conditions
Possibility of hazardous reactions:
- none under normal processing
Conditions to avoid:
- avoid dust formation
- avoid high humidity or wet storage conditions
Incompatible materials:
- no materials to be especially mentioned
Hazardous decomposition products:
- Carbon Monoxide, Carbon Dioxide
- none at recommended storage conditions
Chemical stability:
- stable under recommended storage conditions
Possibility of hazardous reactions:
- none under normal processing
Conditions to avoid:
- avoid dust formation
- avoid high humidity or wet storage conditions
Incompatible materials:
- no materials to be especially mentioned
Hazardous decomposition products:
- Carbon Monoxide, Carbon Dioxide
Disposal considerations
Waste treatment methods:
- Dispose in accordance with regulations of the EU
- Dispose in accordance with regulations of the EU
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
