Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Environmental fate & pathways

Biodegradation in water: screening tests

Currently viewing:

Administrative data

Link to relevant study record(s)

Referenceopen allclose all

Endpoint:
biodegradation in water: ready biodegradability
Type of information:
experimental study
Adequacy of study:
weight of evidence
Study period:
2007
Reliability:
4 (not assignable)
Rationale for reliability incl. deficiencies:
other: Study conducted according to OECD Guideline 301 C but with deviations: no detail on material and methods
Qualifier:
according to guideline
Guideline:
OECD Guideline 301 C (Ready Biodegradability: Modified MITI Test (I))
Deviations:
yes
Remarks:
no detail on material and methods
Principles of method if other than guideline:
Not applicable
GLP compliance:
not specified
Specific details on test material used for the study:
No data
Oxygen conditions:
aerobic
Inoculum or test system:
activated sludge (adaptation not specified)
Details on inoculum:
- Concentration of sludge: 30 mg/L
Duration of test (contact time):
28 d
Initial conc.:
100 mg/L
Based on:
test mat.
Details on study design:
No data
Preliminary study:
No data
Test performance:
No data
Parameter:
% degradation (O2 consumption)
Value:
>= 90 - <= 95
Sampling time:
28 d
Details on results:
- Indirect analysis (BOD): 91, 90 and 95%
- Direct analysis (GC): 100, 100 and 100%
Results with reference substance:
No data

None

Validity criteria fulfilled:
not specified
Interpretation of results:
readily biodegradable
Conclusions:
Under the test conditions, alpha-pinene was readily biodegradable.
Executive summary:

In a ready biodegradation study performed according to OECD Guideline 301 C, alpha-pinene was tested at concentrations of 100 mg/L and the inoculum was activated sludge (30 mg/L). The degradation of the test material was assessed by the determination of the oxygen consumption.

At 100 mg/L test concentration, 90 -95% degradation (biochemical oxygen demand) was reached in 28 days.

 

Under the test conditions, alpha-pinene was readily biodegradable.

 

Endpoint:
biodegradation in water: ready biodegradability
Type of information:
experimental study
Adequacy of study:
weight of evidence
Study period:
1993
Reliability:
4 (not assignable)
Rationale for reliability incl. deficiencies:
other: Study conducted according to OECD Guideline 301 C but with deviations: no detail on material and methods
Qualifier:
according to guideline
Guideline:
OECD Guideline 301 C (Ready Biodegradability: Modified MITI Test (I))
Deviations:
yes
Remarks:
no detail on material and methods
Principles of method if other than guideline:
Not applicable
GLP compliance:
not specified
Specific details on test material used for the study:
No data
Oxygen conditions:
aerobic
Inoculum or test system:
activated sludge (adaptation not specified)
Details on inoculum:
- Concentration of sludge: 30 ppm
Duration of test (contact time):
2 wk
Initial conc.:
100 other: ppm
Based on:
test mat.
Details on study design:
Standard type
Preliminary study:
No data
Test performance:
No data
Parameter:
% degradation (O2 consumption)
Value:
>= 89 - <= 95
Sampling time:
2 wk
Details on results:
- Indirect analysis (BOD): 89%
- Direct analysis (TOC) & (GC): 95% and 100% respectively.
Results with reference substance:
No data

None

Validity criteria fulfilled:
not specified
Interpretation of results:
readily biodegradable
Conclusions:
Under the test conditions, the test item was readily biodegradable.
Executive summary:

In a ready biodegradation study performed according to OECD Guideline 301 C, the test item was tested at concentrations of 100 mg/L and the inoculum was activated sludge (30 mg/L). The degradation of the test material was assessed by the determination of the oxygen consumption.

At 100 mg/L test concentration, 89% degradation (biochemical oxygen demand) was reached in 2 weeks.

 

Under the test conditions, ethanol was readily biodegradable.

Endpoint:
biodegradation in water: ready biodegradability
Type of information:
experimental study
Adequacy of study:
weight of evidence
Study period:
1987
Reliability:
4 (not assignable)
Rationale for reliability incl. deficiencies:
other: Study conducted according to OECD Guideline 301 C but with deviations: no detail on material and methods
Qualifier:
according to guideline
Guideline:
OECD Guideline 301 C (Ready Biodegradability: Modified MITI Test (I))
Deviations:
yes
Remarks:
no detail on material and methods
Principles of method if other than guideline:
Not applicable
GLP compliance:
not specified
Specific details on test material used for the study:
No data
Oxygen conditions:
aerobic
Inoculum or test system:
activated sludge (adaptation not specified)
Details on inoculum:
- Concentration of sludge: 30 ppm
Duration of test (contact time):
2 wk
Initial conc.:
100 other: ppm
Based on:
test mat.
Details on study design:
No data
Preliminary study:
No data
Test performance:
No data
Parameter:
% degradation (O2 consumption)
Value:
88
Sampling time:
2 wk
Details on results:
- Indirect analysis (BOD): 88%
- Direct analysis (GC): 100%
- Direct analysis (TOC): 89%
Results with reference substance:
No data

None

Validity criteria fulfilled:
not specified
Interpretation of results:
readily biodegradable
Conclusions:
Under the test conditions, p-cymene was readily biodegradable.
Executive summary:

In a ready biodegradation study performed according to OECD Guideline 301 C, p-cymene was tested at concentrations of 100 ppm and the inoculum was activated sludge (30 ppm). The degradation of the test material was assessed by the determination of the oxygen consumption.

At 100 ppm test concentration, 88% degradation by biochemical oxygen demand was reached in 2 weeks.

 

Under the test conditions, p-cymene was readily biodegradable.

 

Endpoint:
biodegradation in water: screening tests
Type of information:
(Q)SAR
Adequacy of study:
weight of evidence
Study period:
2017-11-09 to 2017-11-09
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
Remarks:
The value is not an experimental result, however the QSAR model is recommended by the ECHA guidance document on information requirements, is well documented with regard to validation parameters according to OECD principles. Moreover, the substance is fully characterised towards the applicability domain.
Justification for type of information:
QSAR prediction
Qualifier:
according to guideline
Guideline:
other: Reach Guidance on QSAR - R.6
Deviations:
no
Principles of method if other than guideline:
QSAR, Biowin v4.10. More details are given in QMRF/QPRF attached to the dossier.
GLP compliance:
no
Specific details on test material used for the study:
- SMILES: O=C(C=C(C)C12)C(C2)C1(C)C
- CHEM: BICYCLO[3.1.1]HEPT-3-EN-2-ONE, 4,6,6-TRIMETHYL-
- MOL FOR: C10H14O1
- MOL WT: 150.22
Oxygen conditions:
not specified
Inoculum or test system:
not specified
Details on inoculum:
not applicable
Details on study design:
not applicable
Preliminary study:
not applicable
Test performance:
not applicable
Parameter:
probability of ready biodegradability (QSAR/QSPR)
Remarks on result:
not readily biodegradable based on QSAR/QSPR prediction
Details on results:
Biowin 1 (linear model prediction) = Does Not Biodegrade Fast
Biowin 2 (non-linear model prediction) = Does Not Biodegrade Fast
Biowin 3 (ultimate biodegradation timeframe) = Weeks-Months
Biowin 4 (Primary biodegradation timeframe) = Days-Weeks
Biowin 5 (MITI linear model prediction) = Readily Degradable
Biowin 6 (MITI non-linear model prediction) = Not Readily Degradable
Biowin 7 (Anaerobic model prediction) = Does not Biodegrade Fast
Ready Biodegradability Prediction: NO
Results with reference substance:
not applicable

Please see the attached documents.

Validity criteria fulfilled:
not applicable
Interpretation of results:
not readily biodegradable
Conclusions:
It is expected that the substance is not readily biodegradable.
Executive summary:

The ready biodegradation property of the substance was investigated using QSAR approach with Biowin v4.10 plug-in from EPISUITE v4.1 from US EPA.

It's expected that the assessed substance is not readily biodegradable.

Endpoint:
biodegradation in water: screening tests
Type of information:
(Q)SAR
Adequacy of study:
weight of evidence
Study period:
2017-11-09 to 2017-11-09
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
Remarks:
The value is not an experimental result, however the QSAR model is recommended by the ECHA guidance document on information requirements, is well documented with regard to validation parameters according to OECD principles. Moreover, the substance is fully characterised towards the applicability domain.
Justification for type of information:
QSAR prediction
Qualifier:
according to guideline
Guideline:
other: Reach Guidance on QSAR - R.6
Deviations:
no
Principles of method if other than guideline:
QSAR, Biowin v4.10. More details are given in QMRF/QPRF attached to the dossier.
GLP compliance:
no
Specific details on test material used for the study:
- SMILES: OC(CCC(=C1)C)(C1)C(C)C
- MOL FOR: C10H18O1
- MOL WT: 154.25
Oxygen conditions:
not specified
Inoculum or test system:
not specified
Details on inoculum:
not applicable
Details on study design:
not applicable
Preliminary study:
not applicable
Test performance:
not applicable
Parameter:
probability of ready biodegradability (QSAR/QSPR)
Remarks on result:
not readily biodegradable based on QSAR/QSPR prediction
Details on results:
Biowin 1 (linear model prediction) = Does Not Biodegrade Fast
Biowin 2 (non-linear model prediction) = Does Not Biodegrade Fast
Biowin 3 (ultimate biodegradation timeframe) = Weeks-Months
Biowin 4 (Primary biodegradation timeframe) = Days-Weeks
Biowin 5 (MITI linear model prediction) = Not Readily Degradable
Biowin 6 (MITI non-linear model prediction) = Not Readily Degradable
Biowin 7 (Anaerobic model prediction) = Does not Biodegrade Fast
Ready Biodegradability Prediction: NO
Results with reference substance:
not applicable

Please see the attached documents.

Validity criteria fulfilled:
not applicable
Interpretation of results:
not readily biodegradable
Conclusions:
It is expected that the substance is not readily biodegradable.
Executive summary:

The ready biodegradation property of the substance was investigated using QSAR approach with Biowin v4.10 plug-in from EPISUITE v4.1 from US EPA.

It's expected that the assessed substance is not readily biodegradable.

Description of key information

Based on a weight of evidence approach with data on main constituents, the registered substance cannot be considered as readily biodegradable.

Key value for chemical safety assessment

Biodegradation in water:
under test conditions no biodegradation observed

Additional information

Individual data about the ready biodegradability of the main constituents of the substance are provided in the table below:

Constituents

CAS No

% ranges*

Biodegradation results

Reference

Alpha-pinene

80 -56 -8

0 - 1

Readily Biodegradable

MITI, 2007

Paracymene 99 -87 -6 0 - 1 Readily Biodegradable  MITI, 1987
Ethanol 64 -17 -5  0 - 3 Readily Biodegradable  MITI, 1993
 Verbenone  80-57-9  0 - 1  Not Readily Biodegradable  QSAR, BioWin v4.10
 4-terpinenol  562 -74 -3  0 - 3  Not Readily Biodegradable  QSAR, BioWin v4.10

* % ranges have been taken from the SIP of the substance. Only major constituents (>= 1% based on upper value of the range) were taken into account for this assessment.

Regarding these ranges, the unknown part of the NCS composition remains high.

With data on individual constituents, it is therefore not possible to consider that the substance is readily biodegradable, because of a lack of data at the whole substance scale.

By default, the substance is considered not readily biodegradable.