Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 446-800-7 | CAS number: 175357-18-3
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure -
- Inhalation: Move exposed person to fresh air. Keep person warm and at rest. If not breathing,
if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or
oxygen by trained personnel. It may be dangerous to the person providing aid to
give mouth-to-mouth resuscitation. Get medical attention if adverse health effects
persist or are severe. If unconscious, place in recovery position and get medical
attention immediately. Maintain an open airway. Loosen tight clothing such as a
collar, tie, belt or waistband.
- Eyes: Get medical attention immediately. Immediately flush eyes with plenty of water,
occasionally lifting the upper and lower eyelids. Check for and remove any contact
lenses. Continue to rinse for at least 10 minutes. Chemical burns must be treated
promptly by a physician.
- Skin: Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Get medical attention if symptoms occur. Wash clothing before reuse.
Clean shoes thoroughly before reuse.
- Ingestion: Wash out mouth with water. Remove dentures if any. Move exposed person to
fresh air. Keep person warm and at rest. If material has been swallowed and the
exposed person is conscious, give small quantities of water to drink. Stop if the
exposed person feels sick as vomiting may be dangerous. Do not induce vomiting
unless directed to do so by medical personnel. If vomiting occurs, the head should
be kept low so that vomit does not enter the lungs. Get medical attention if adverse
health effects persist or are severe. Never give anything by mouth to an
unconscious person. If unconscious, place in recovery position and get medical
attention immediately. Maintain an open airway. Loosen tight clothing such as a
collar, tie, belt or waistband.
- Inhalation: Move exposed person to fresh air. Keep person warm and at rest. If not breathing,
if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or
oxygen by trained personnel. It may be dangerous to the person providing aid to
give mouth-to-mouth resuscitation. Get medical attention if adverse health effects
persist or are severe. If unconscious, place in recovery position and get medical
attention immediately. Maintain an open airway. Loosen tight clothing such as a
collar, tie, belt or waistband.
- Eyes: Get medical attention immediately. Immediately flush eyes with plenty of water,
occasionally lifting the upper and lower eyelids. Check for and remove any contact
lenses. Continue to rinse for at least 10 minutes. Chemical burns must be treated
promptly by a physician.
- Skin: Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Get medical attention if symptoms occur. Wash clothing before reuse.
Clean shoes thoroughly before reuse.
- Ingestion: Wash out mouth with water. Remove dentures if any. Move exposed person to
fresh air. Keep person warm and at rest. If material has been swallowed and the
exposed person is conscious, give small quantities of water to drink. Stop if the
exposed person feels sick as vomiting may be dangerous. Do not induce vomiting
unless directed to do so by medical personnel. If vomiting occurs, the head should
be kept low so that vomit does not enter the lungs. Get medical attention if adverse
health effects persist or are severe. Never give anything by mouth to an
unconscious person. If unconscious, place in recovery position and get medical
attention immediately. Maintain an open airway. Loosen tight clothing such as a
collar, tie, belt or waistband.
Fire-fighting measures
Suitable: Use an extinguishing agent suitable for the surrounding fire.
Not suitable: None known.
Special exposure hazards: No specific fire or explosion hazard.
Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Hazardous thermal decomposition products: Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
Special protective equipment for fire-fighters: Fire-fighters should wear appropriate protective equipment and self-contained
breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode.
Not suitable: None known.
Special exposure hazards: No specific fire or explosion hazard.
Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Hazardous thermal decomposition products: Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
Special protective equipment for fire-fighters: Fire-fighters should wear appropriate protective equipment and self-contained
breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode.
Accidental release measures
Personal precautions: No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Avoid breathing dust. Provide
adequate ventilation. Wear appropriate respirator when ventilation is inadequate.
Put on appropriate personal protective equipment
Environmental precautions: Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Methods for cleaning up
Small spill: Move containers from spill area. Vacuum or sweep up material and place in a
designated, labelled waste container. Dispose of via a licensed waste disposal
contractor.
Large spill: Move containers from spill area. Approach the release from upwind. Prevent entry
into sewers, water courses, basements or confined areas. Vacuum or sweep up
material and place in a designated, labelled waste container. Avoid creating dusty
conditions and prevent wind dispersal. Dispose of via a licensed waste disposal
contractor.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Avoid breathing dust. Provide
adequate ventilation. Wear appropriate respirator when ventilation is inadequate.
Put on appropriate personal protective equipment
Environmental precautions: Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Methods for cleaning up
Small spill: Move containers from spill area. Vacuum or sweep up material and place in a
designated, labelled waste container. Dispose of via a licensed waste disposal
contractor.
Large spill: Move containers from spill area. Approach the release from upwind. Prevent entry
into sewers, water courses, basements or confined areas. Vacuum or sweep up
material and place in a designated, labelled waste container. Avoid creating dusty
conditions and prevent wind dispersal. Dispose of via a licensed waste disposal
contractor.
Handling and storage
Handling: Put on appropriate personal protective equipment (see section 8). Eating, drinking
and smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and
smoking. Do not get in eyes or on skin or clothing. Do not ingest. Avoid breathing
dust. Keep in the original container or an approved alternative made from a
compatible material, kept tightly closed when not in use. Empty containers retain
product residue and can be hazardous. Do not reuse container.
Storage: STORE UNDER COVER. , Keep away from heat. , Recommended storage
temperature: 15°C - 25°C
Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible
materials and food and drink. Keep container tightly closed and
sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabelled containers.
Use appropriate containment to avoid environmental contamination.
Packaging materials
Recommended
Use original container.
and smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and
smoking. Do not get in eyes or on skin or clothing. Do not ingest. Avoid breathing
dust. Keep in the original container or an approved alternative made from a
compatible material, kept tightly closed when not in use. Empty containers retain
product residue and can be hazardous. Do not reuse container.
Storage: STORE UNDER COVER. , Keep away from heat. , Recommended storage
temperature: 15°C - 25°C
Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible
materials and food and drink. Keep container tightly closed and
sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabelled containers.
Use appropriate containment to avoid environmental contamination.
Packaging materials
Recommended
Use original container.
Transport information
Land transport (UN RTDG/ADR/RID)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- not regulated
Inland waterway transport (UN RTDG/ADN(R))
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- not regulated
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- not regulated
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- not regulated
SpecialProvisionsopen allclose all
Exposure controls / personal protection
No exposure limit value known.
Recommended monitoring procedures
If this product contains ingredients with exposure limits, personal, workplace
atmosphere or biological monitoring may be required to determine the effectiveness
of the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to European Standard EN 689 for
methods for the assessment of exposure by inhalation to chemical agents and
national guidance documents for methods for the determination of hazardous
substances.
Occupational exposure
controls
: Use only with adequate ventilation. If user operations generate dust, fumes, gas,
vapour or mist, use process enclosures, local exhaust ventilation or other
engineering controls to keep worker exposure to airborne contaminants below any
recommended or statutory limits.
Hygiene measures: Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.
Respiratory protection: Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must
be based on known or anticipated exposure levels, the hazards of the product and
the safe working limits of the selected respirator.
Hand protection
Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary. Recommended: nitrile rubber,.,PVC Breakthrough Time: <1
hours
Eye protection
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists
or dusts. If operating conditions cause high dust concentrations to be produced,
use dust goggles.
Skin protection
Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product.
Environmental exposure controls
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable levels.
Recommended monitoring procedures
If this product contains ingredients with exposure limits, personal, workplace
atmosphere or biological monitoring may be required to determine the effectiveness
of the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to European Standard EN 689 for
methods for the assessment of exposure by inhalation to chemical agents and
national guidance documents for methods for the determination of hazardous
substances.
Occupational exposure
controls
: Use only with adequate ventilation. If user operations generate dust, fumes, gas,
vapour or mist, use process enclosures, local exhaust ventilation or other
engineering controls to keep worker exposure to airborne contaminants below any
recommended or statutory limits.
Hygiene measures: Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.
Respiratory protection: Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must
be based on known or anticipated exposure levels, the hazards of the product and
the safe working limits of the selected respirator.
Hand protection
Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary. Recommended: nitrile rubber,.,PVC Breakthrough Time: <1
hours
Eye protection
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists
or dusts. If operating conditions cause high dust concentrations to be produced,
use dust goggles.
Skin protection
Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product.
Environmental exposure controls
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable levels.
Stability and reactivity
The product is stable.
Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to avoid, Materials to avoid: No specific data.
Under normal conditions of storage and use, hazardous decomposition products
should not be produced.
Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to avoid, Materials to avoid: No specific data.
Under normal conditions of storage and use, hazardous decomposition products
should not be produced.
Disposal considerations
Methods of disposal: The generation of waste should be avoided or minimised wherever possible. Empty
containers or liners may retain some product residues. This material and its
container must be disposed of in a safe way. Dispose of surplus and non-recyclable
products via a licensed waste disposal contractor. Disposal of this product, solutions
and any by-products should at all times comply with the requirements of
environmental protection and waste disposal legislation and any regional local
authority requirements. Avoid dispersal of spilt material and runoff and contact with
soil, waterways, drains and sewers.
Hazardous waste: Within the present knowledge of the supplier, this product is not regarded as
hazardous waste, as defined by EU Directive 91/689/EEC.
containers or liners may retain some product residues. This material and its
container must be disposed of in a safe way. Dispose of surplus and non-recyclable
products via a licensed waste disposal contractor. Disposal of this product, solutions
and any by-products should at all times comply with the requirements of
environmental protection and waste disposal legislation and any regional local
authority requirements. Avoid dispersal of spilt material and runoff and contact with
soil, waterways, drains and sewers.
Hazardous waste: Within the present knowledge of the supplier, this product is not regarded as
hazardous waste, as defined by EU Directive 91/689/EEC.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
