Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 202-963-4 | CAS number: 101-65-5
Guidance on Safe Use
Administrative data
First-aid measures
4.1 General information:
Remove contaminated clothing.
4.2 Inhalation:
Fresh air.
4.3 Skin contact:
Immediately wash thoroughly with soap and water, subsequently apply hand cream.
4.4 Eye contact:
Immediately flush with flowing water for at least 10 minutes, holding the eyelid open.
If eye irritation persists, seek eye specialist advice.
4.5 Swallowing:
Flush mouth with water. Do not induce vomiting, seek medical advice.
4.6 Self-protection of first-aider:
Avoid contact with the product.
4.7 Advice to physician (symptoms, risks, treatment):
Symptomatic treatment.
Fire-fighting measures
5.1 Extinguishing media:
Water spray jet, foam, CO2, extinguishing powder.
5.2 Extinguishing media that must not be used for safety reasons:
Full water jet
5.3 Special hazards arising from the substance or mixture, its combustion products or generated
gases:
The following substances may be released in case of fire: Carbon monoxide, carbon dioxide, nitrogen
oxide, isocyanate-containing vapours.
5.4 Advice for fire-fighters
Keep available/wear respiratory protective devices.
5.5 Additional information:
none
Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures:
Provide adequate ventilation. Remove uninvolved persons.
Wear personal protection equipment; see Chapter 8.
6.2 Environmental precautions:
Keep away from sewerage systems, waterways and soil.
6.3 Methods and material for containment and cleaning up:
Take up spilled product mechanically. Store in marked, tightly closed containers.
Dispose in compliance with regulations.
6.4 Additional information:
none
Handling and storage
7.1.1 Precautions for safe handling:
Protective measures:
Technical measures:
Observe normal safety precautions associated with the handling of chemicals.
Workplaces where isocyanate aerosols and/or vapours may be generated in higher concentrations
shall be equipped with targeted air extraction in order to prevent exceeding of occupational hygiene
limit values. Ensure that airflow is never directed towards personnel. Inspect the efficiency of
installations at regular intervals.
Avoid eye and skin contact.
Avoid dust formation. Do not inhale dusts.
Specific requirements or handling precautions:
7.1.2 Fire and explosion protection information:
Adopt typical preventive fire protection measures.
7.1.3 Further information:
none
7.2 Storage:
7.2.1 Technical measures and storage conditions:
Store in tightly sealed containers.
7.2.2 Packaging materials:
not specified
7.2.5 Further information relating to storage conditions:
Storage class (VCI): 11 - Flammable solid
7.3 Specified end use: Bonding agent
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
8.1 Control parameters:
No data available
8.1.1 Components with occupational exposure or biological limit values to be monitored:
8.1.1.1 Occupational exposure limit values:
No data available
8.1.1.2 Additional exposure limit values under processing conditions:
No data available
8.1.1.3 DNEL/DMEL and PNEC values:
No data available
8.2 Exposure control and monitoring:
8.2.1 Control and monitoring of occupational exposure:
Product-specific measures to avoid exposure:
Provide adequate ventilation.
Organisational measures to avoid exposure:
Customary safety precautions associated with the handling of chemicals should be observed.
Avoid eye and skin contact.
Remove soiled or soaked clothing immediately.
Do not eat, drink or smoke during work.
Cleanse skin with water and soap before breaks and at end of work.
Technical measures to avoid exposure:
Provide adequate ventilation.
Personal protection equipment:
Respiratory protection:
Respiratory protection usually not required. In case of insufficient ventilation or when dusts are
generated, use self-contained breathing apparatus.
Hand protection:
Glove material: Nitrile rubber (Dermatril)
Material thickness 0.1 mm
Penetration time > 480 min
Eye protection:
Protective goggles
Body protection:
Protective clothing. Remove soiled or soaked clothing immediately.
8.2.2 Control and monitoring of environmental exposure:
Avoid release to the environment.
Technical measures to avoid exposure:
Provide adequate ventilation.
8.2.3 Control and monitoring of user exposure
Measures related to use of the substance (as such or in preparations) by user:
Avoid eye and skin contact. Customary safety precautions associated with the handling of chemicals
should be observed.
Stability and reactivity
Disposal considerations
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
