Substance Information
Substance Information
REACH Registration data can be found in the new ECHA CHEM database. The old ‘Registered substance factsheets’ will be available on this web site during the transition period but have not been updated since 19 May 2023. More
Residues (petroleum), thermal cracked vacuum
A complex combination of hydrocarbons obtained from the vacuum distillation of the products from a thermal cracking process. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C34 and boiling above approximately 495°C (923°F).
EC / List no.: 295-518-9
CAS no.: 92062-05-0
Mol. formula:
This substance is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 1 000 000 to < 10 000 000 tonnes per annum.
This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.
This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.
Consumer Uses
This substance is used in the following products:
adhesives and sealants,
coating products,
fillers, putties, plasters, modelling clay,
finger paints,
non-metal-surface treatment products,
inks and toners,
leather treatment products,
lubricants and greases,
anti-freeze products,
polishes and waxes and
textile treatment products and dyes.
Other release to the environment of this substance is likely to occur from:
indoor use as processing aid and
outdoor use as processing aid.
Article service life
Release to the environment of this substance can occur from industrial use:
in processing aids at industrial sites,
manufacturing of the substance,
of substances in closed systems with minimal release,
formulation of mixtures,
as an intermediate step in further manufacturing of another substance (use of intermediates) and
as processing aid.
Other release to the environment of this substance is likely to occur from:
outdoor use and
indoor use as processing aid.
This substance can be found in products with material based on:
stone, plaster, cement, glass and ceramic used for large surface area articles (e.g. construction and building materials for floor coverings, isolation articles).
Widespread uses by professional workers
ECHA has no public registered data indicating whether or in which chemical products the substance might be used.
ECHA has no public registered data on the types of manufacture using this substance.
Other release to the environment of this substance is likely to occur from:
outdoor use,
indoor use as processing aid,
indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters) and
outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).
Formulation or re-packing
ECHA has no public registered data indicating whether or in which chemical products the substance might be used.
Release to the environment of this substance can occur from industrial use:
formulation of mixtures,
manufacturing of the substance,
formulation in materials,
in processing aids at industrial sites,
in the production of articles,
as an intermediate step in further manufacturing of another substance (use of intermediates),
as processing aid,
for thermoplastic manufacture,
as processing aid and
of substances in closed systems with minimal release.
Uses at industrial sites
This substance is used in the following products:
pH regulators and water treatment products.
This substance has
an industrial use resulting in manufacture of another substance (use of intermediates).
This substance is used in the following areas:
formulation of mixtures and/or re-packaging.
This substance is used for the manufacture of:
chemicals and
rubber products.
Release to the environment of this substance can occur from industrial use:
in processing aids at industrial sites,
of substances in closed systems with minimal release,
as an intermediate step in further manufacturing of another substance (use of intermediates),
as processing aid,
manufacturing of the substance,
formulation of mixtures and
as processing aid.
Manufacture
Release to the environment of this substance can occur from industrial use:
manufacturing of the substance,
in processing aids at industrial sites,
as processing aid,
formulation of mixtures,
formulation in materials,
in the production of articles,
as an intermediate step in further manufacturing of another substance (use of intermediates),
as processing aid,
for thermoplastic manufacture and
of substances in closed systems with minimal release.
The InfoCard summarises the non-confidential data on substances as held in the databases of the European Chemicals Agency (ECHA), including data provided by third parties. The InfoCard is automatically generated. Information requirements under different legislative frameworks may therefore not be up–to–date or complete. Substance manufacturers and importers are responsible for consulting official publications. This InfoCard is covered by the ECHA Legal Disclaimer.
about INFOCARD - Last updated: 13/05/2023