Skip to Content
Skip to Content

Substance Information

Substance information

Infocards are automatically generated based on industry data. What is an infocard?

Extract oils (coal), coal tar residual pyrolysis oils, naphthalene oil, distn. residues

Residue from the distillation of dephenolated and debased methylnaphthalene oil (from bituminous coal tar and pyrolysis residual oils) with a boiling range of 240°C to 260°C (464°F to 500°F). Composed primarily of substituted dinuclear aromatic and heterocyclic hydrocarbons.

Help Substance identity

The ‘Substance identity’ section is calculated from substance identification information from all ECHA databases. The substance identifiers displayed in the InfoCard are the best available substance name, EC number, CAS number and/or the molecular and structural formulas.

Some substance identifiers may have been claimed confidential, or may not have been provided, and therefore not be displayed.

EC (European Community) Number

The EC Number is the numerical identifier for substances in the EC Inventory. The EC Inventory is a combination of three independent European lists of substances from the previous EU chemicals regulatory frameworks (EINECS, ELINCS and the NLP-list). More information about the EC Inventory can be found here.

If the substance was not covered by the EC Inventory, ECHA attributes a list number in the same format, starting with the numbers 6, 7, 8 or 9.

The EC or list number is the primary substance identifier used by ECHA.

CAS (Chemical Abstract Service) registry number

The CAS number is the substance numerical identifier assigned by the Chemical Abstracts Service, a division of the American Chemical Society, to substances registered in the CAS registry database. A substance identified primarily by an EC or list number may be linked with more than one CAS number, or with CAS numbers that have been deleted. More information about CAS and the CAS registry can be found here.

Molecular formula

The molecular formula identifies each type of element by its chemical symbol and identifies the number of atoms of each element found in one discrete molecule of the substance. This information is only displayed if the substance is well–defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.

Molecular structure

The molecular structure is based on structures generated from information available in ECHA’s databases. If generated, an InChI string will also be generated and made available for searching. This information is only displayed if the substance is well-defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.

More help available here.

EC / List no.: 310-171-6

CAS no.: 122070-80-8

Mol. formula:

formula
Help Hazard classification and labelling

The ‘Hazard classification and labelling’ section shows the hazards of a substance based on the standardised system of statements and pictograms established under the CLP (Classification Labelling and Packaging) Regulation. The CLP Regulation makes sure that the hazards presented by chemicals are clearly communicated to workers and consumers in the European Union. The CLP Regulation uses the UN Global Harmonised System (GHS) and European Union Specific Hazard Statements (EUH).

This section is based on three sources for information (harmonised classification and labelling (CLH), REACH registrations and CLP notifications). The source of the information is mentioned in the introductory sentence of the hazard statements. When information is available in all sources, the first two are displayed as a priority.

Please note:

The purpose of the information provided under this section is to highlight the substance hazardousness in a readable format. It does not represent a new labelling, classification or hazard statement, neither reflect other factors that affect the susceptibility of the effects described, such as duration of exposure or substance concentration (e.g. in case of consumer and professional uses). Other relevant information includes the following:

  • Substances may have impurities and additives that lead to different classifications. If at least one company has indicated that the substance classification is affected by impurities or additives, this will be indicated by an informative sentence. However, substance notifications in the InfoCard are aggregated independently of the impurities and additives.
  • Hazard statements were adapted to improve readability and may not correspond textually to the hazard statements codes description in the European Union Specific Hazard Statements (EUH) or the UN Global Harmonised System (GHS).

To see the full list of notified classifications and to get more information on impurities and additives relevant to classification please consult the C&L Inventory.

More information about Classification and Labelling is available in the Regulations section of ECHA website.

More help available here.

Harmonised classification and labelling (CLH)

Harmonised classification and labelling is a legally binding classification and labelling for a substance, agreed at European Community level. Harmonisation is based on the substance’s physical, toxicological and eco-toxicological hazard assessment.

The ‘Hazard classification’ and labelling section uses the signal word, pictogram(s) and hazard statements of the substance under the harmonised classification and labelling (CLH) as its primary source of information.

If the substance is covered by more than one CLH entry (e.g. disodium tetraborate EC no. 215–540–4, is covered by three harmonisations: 005–011–00–4; 005–011–01–1 and 005–011–02–9), CLH information cannot be displayed in the InfoCard as the difference between the CLH classifications requires manual interpretation or verification. If a substance is classified under multiple CLH entries, a link to the C&L Inventory is provided to allow users to view CLH information associated with the substance and no text is automatically generated for the InfoCard.

It is possible that a harmonisation is introduced through an amendment to the CLP Regulation. In that case, the ATP (Adaptation to Technical Progress) number is displayed.

More info on CLH can be found here.

Classification and labelling under REACH

If available, additional information on classification and labelling (C&L) is derived from REACH registration dossiers submitted by industry. This information has not been reviewed or verified by ECHA, and may change without prior notice. REACH registration dossiers have greater data requirements (such as supporting studies) than do notifications under CLP.

Notifications under the Classification Labelling and Packaging (CLP) Regulation

If no EU harmonised classification and labelling exists and the substance was not registered under REACH, information derived from classification and labelling (C&L) notifications to ECHA under CLP Regulation is displayed under this section. These notifications can be provided by manufacturers, importers and downstream users. ECHA maintains the C&L Inventory, but does not review or verify the accuracy of the information.

Note that for readability purposes, only the pictograms, signal words and hazard statements referred in more than 5% of the notifications under CLP are displayed.

GHS08: Serious Health Hazard

Danger! According to the harmonised classification and labelling (ATP01) approved by the European Union, this substance may cause genetic defects and may cause cancer.

Help Properties of concern

The ‘Properties of concern’ section shows ECHA-assigned graphical indicators for certain substance properties that are regarded as being of relevance or importance to human health and/or the environment based on the information provided to the Agency.

Properties of concern are calculated at four "levels" of certainty:

  • "Recognised" - meaning that the concern is indicated in an official source; either a Harmonised C&L (CLP Regulation Annex VI) or in the Candidate list of substances of very high concern for authorisation (REACH). Recognised concerns are illustrated with a dark red icon.
  • "Potential" - again comes from official sources only. For (C), (M), and (R) it means that the concern is suspected in a Harmonised C&L (CLP Regulation Annex VI), as Carc. 2, Muta. 2, or Repr. 2. For (PBT) and (ED) Potential means that the concern is under assessment in the PBT or ED assessment list, and the outcome is not "Not PBT" or "Not ED". There are no potential (Ss) or (Sr)s. Potential concerns are illustrated with a light red icon.
  • "Broad agreement" - comes from data submitted by industry to ECHA, and indicates that the data submitted is aligned, with >= 50% of the data submitters providing the same concern. Broad agreement concerns are illustratated with a solid outlined circle icon.
  • "Minority position" - comes from data submitted by industry to ECHA, and indicates that the data submitted is not aligned. > 5% and < 50% of the data submitters have provided the concerns indicated at this "level". Minority position concerns are illustrated with a greyed out circle icon.

The following properties of concern are calculated:

  • Carcinogenic (C) – Recognised carcinogen: comes from a harmonised C&L classifying the substance as Carc. 1A or 1B and/or an entry in the Candidate list. Potential carcinogen: comes from a harmonised C&L classifying the substance as a suspected carcinogen Carc.2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is carcinogenic. Minority position: comes from industry data where a minority of data submitters indicate the substance is carcinogenic. More information about carcinogenicity here.
  • Mutagenic (M) – Recognised mutagen: comes from a harmonised C&L classifying the substance as Muta. 1A or 1B and/or an entry in the Candidate list. Potential mutagen: comes from a harmonised C&L classifying the substance as a suspected mutagen Muta. 2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is mutagenic. Minority position: comes from industry data where a minority of data submitters indicate the substance is mutagenic. More information about mutagenicity here.
  • Toxic to Reproduction (R) – Recognised as toxic to reproduction: comes from a harmonised C&L classifying the substance as Carc. 1A or 1B and/or an entry in the Candidate list. Potentially toxic to reproduction: comes from a harmonised C&L classifying the substance as suspected toxic to reproduction Repr. 2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is toxic to reproduction. Minority position: comes from industry data where a minority of data submitters indicate the substance is toxic to reproduction. More information about reproductive toxicity here.
  • Skin sensitising (Ss) – Recognised skin sensitiser: comes from a harmonised C&L classifying the substance as Skin Sens. 1, 1A, or 1B. Broad agreement: comes from industry data where a majority of data submitters agree the substance is a skin sensitiser. Minority position: comes from industry data where a minority of data submitters indicate the substance is skin sensitising. More information about skin sensitiser here.
  • Respiratory sensitising (Sr) – Recognised respiratory sensitiser: comes from a harmonised C&L classifying the substance as Resp. Sens. 1, 1A, or 1B and/or an entry in the Candidate list. Broad agreement: comes from industry data where a majority of data submitters agree the substance is a respiratory sensitiser. Minority position: comes from industry data where a minority of data submitters indicate the substance is a respiratory sensitiser. More information about respiratory sensitiser here.
  • PBT – Recognised Persistent, bioaccumulative and toxic (PBT): comes from an entry in the Candidate list. Potential PBT: is shown for substances under assessment, and comes from an entry in the PBT assessment list, if the outcome is not final and “Not PBT”. Broad agreement: comes from industry data where a majority of data submitters agree the substance is PBT. Minority position: comes from industry data where a minority of data submitters indicate the substance is PBT. More information about persistent, bioaccumulative and toxic substances here.
  • ED – Recognised Endocrine Disruptor (ED): comes from an entry in the Candidate list. Potential ED: is shown for substances under assessment, and comes from an entry in the ED assessment list, if the outcome is not final and “Not ED”. At this time there is no explicit possibility for industry to indicate their opinion on ED status for substances. If and when this possibility exists it is proposed that industry data also be included in the ED property of concern calculation. More information about endocrine disrupting substances here.

The substance properties displayed in this section are derived from Harmonised classification and labelling (CLH) data, entries in the Candidate list of substances of very high concern for authorisation, the PBT assessment list, the ED assessment list, REACH registered dossier data and from notifications made under CLP. A prioritisation hierarchy means that data is taken from harmonised C&L data and regulatory lists first, then REACH registrations and finally from CLP notifications.

Impurities or additives: When a specific critical property is calculated from industry data and where the majority of data submitters have indicated that the property relates to cases containing impurities and/or additives, then the respective critical property icon is modified with an asterisk (*).

  • C

Carcinogenic

  • M

Mutagenic

about INFOCARD - Last updated: 03/07/2019 InfoCard

The InfoCard summarises the non-confidential data of a substance held in the databases of the European Chemicals Agency (ECHA). InfoCards are generated automatically based on the data available at the time of generation.

The quality and correctness of the information submitted to ECHA remains the responsibility of the data submitter. The type of uses and classifications may vary between different submissions to ECHA and for a full understanding it is recommended to consult the source data. Information on applicable regulatory frameworks is also automatically generated and may not be complete or up to date. It is the responsibility of the substance manufacturers and importers to consult official publications, e.g. the electronic edition of the Official Journal of the European Union.

InfoCards are updated when new information is available. The date of the last update corresponds to the publication date of the InfoCard and not necessarily to the date in which the update occurred in the source data.

More help available here.

Help Help

Key datasets

Help Help

Regulatory context

Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):

REACH - Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation
CLP - Classification, Labelling and Packaging
  • A list of substances for which classification and labelling data have been notified to ECHA by manufacturers or importers.
Previous Legislations
  • Substances listed in the EINECS, ELINCS, or NLP inventories.
Help Help

Substance names and other identifiers

Regulatory process names
[Residue from the distillation of dephenolated and debased methylnaphthalene oil (from bituminous coal tar and pyrolysis residual oils) with a boiling range of 240°C to 260°C (464°F to 500°F). Composed primarily of substituted dinuclear aromatic and heterocyclic hydrocarbons.]
Residue from the distillation of dephenolated and debased methylnaphthalene oil (from bituminous coal tar and pyrolysis residual oils) with a boiling range of 240°C to 260°C (464°F to 500°F). Composed primarily of substituted dinuclear aromatic and heterocyclic hydrocarbons.
C&L Inventory
Extract oils (coal), coal tar residual pyrolysis oils, naphthalene oil, distn. residues
EC Inventory, C&L Inventory, Pre-Registration process
Redistillates
Residue from the distillation of dephenolated and debased methylnaphthalene oil (from bituminous coal tar and pyrolysis residual oils) with a boiling range of 240°C to 260°C (464°F to 500°F). Composed primarily of substituted dinuclear aromatic and heterocyclic hydrocarbons.
C&L Inventory
Translated names
(Jäägid, mis on bituminoosse kivisõetõrvast ja pürolüüsiõli jääkidest saadud metüülnaftaleenõli destilleerimisel, millest on eraldatud fenoolid ja alused ning mis keeb temperatuuril vahemikus 240°C –260 °C. Koosneb peamiselt asendatud kahetuumalistest aromaatsetest ja heterotrüklilistest süsivesinikest.) (et)
C&L Inventory
[Destilācijas atlikums no metilnaftalīna eļļas, kura iepriekš attīrīta no fenola un bāzēm (iegūta no bitumena akmeņogļu augstās temperatūras darvas un pirolīzes atlikuma eļļām), viršanas temperatūra no 240°C līdz 260°C (464°F līdz 500°F). Sastāv galvenokārt no aizvietotiem dicikliskiem aromātiskiem un heterocikliskiem ogļūdeņražiem.] (lv)
C&L Inventory
[Fenol- és bázismentesített metilnaftalin olaj desztillációs távozó terméke (bitumenes kőszénkátrányból és pirolízis maradékolajokból), melynek forráspont tartománya 240°C-tól 260°C-ig (464°F-től 500°F-ig) terjed. Elsősorban szubsztituált dinukleáris aromás és heterociklusos szénhidrogénekből áll.] (hu)
C&L Inventory
[Metilnaftaleno alyvos (bituminių anglių deguto ir liekamųjų pirolizės alyvų), iš kurios pašalintas fenolis ir bazės, distiliavimo likutis, kurio virimo temperatūra nuo 240 °C iki 260 °C (nuo 464 °F iki 500 °F). Jį sudaro daugiausia pakeistieji dvicikliai aromatiniai ir heterocikliniai angliavandeniliai.] (lt)
C&L Inventory
[Ostanek destilacije metilnaftalenskega olja po odstranitvi fenola in baz (iz bituminoznega premogovega katrana in pirolize oljnih ostankov) z vreliščem v območju med 240 °C in 260 °C. Sestoji pretežno iz substituiranih ogljikovodikov z dvema aromatskima jedroma in heterocikličnih ogljikovodikov.] (sl)
C&L Inventory
[Ostatak iz destilacije metilnaftalenskog ulja (iz katrana bituminoznog ugljena i ostatnih ulja iz pirolize) iz kojega su uklonjeni fenoli i baze s područjem vrenja približno od 240 °C do 260 °C. Sastavljen primarno od supstituiranih dinuklearnih aromatskih i heterocikličkih ugljikovodika.] (hr)
C&L Inventory
[Pozostałość z destylacji odfenolowanego i pozbawionego zasad oleju metylonaftalenowego otrzymanego ze smoły z węgla kamiennego i pozostałości olejowych z pirolizy wrząca w zakresie temperatur od 240 do 260°C (464°F do 500°F). Składa się głównie z podstawionych dwupierścieniowych węglowodorów aromatycznych i heterocyklicznych]. (pl)
C&L Inventory
[Rest fra destillasjon av metylnaftalenolje (fra bituminøs stenkulltjære og rester av pyrolyseoljer), der fenoler og baser er fjernet, med omtrentlig kokepunktsintervall fra 240 °C til 260 °C (464 °F til 500 °F). Består hovedsakelig av substituerte bisykliske, aromatiske og heterosykliske hydrokarboner.] (no)
C&L Inventory
[Reziduul rezultat în urma distilării ţiţeiului metilnaftalinic din care au fost îndepărtate bazele şi fenolul (din gudronul cărbunelui bituminos şi uleiuri de piroliză reziduale) cu punct de fierbere la temperaturi cuprinse între 240°C şi 260°C (464°F şi 500°F). Compus cu precădere din hidrocarburi cu două nuclee aromatice substituite şi hidrocarburi heterociclice.] (ro)
C&L Inventory
[Rückstand aus der nach Phenol- und Basenentzug erfolgten Destillation von Methylnaphthalinöl (aus Teer aus bituminöser Kohle und Pyrolyse-Rückstandsölen) mit einem Siedebereich von 240 °C bis 260 °C; besteht vorwiegend aus substituierten dinuklearen aromatischen und heterocyclischen Kohlenwasserstoffen] (de)
C&L Inventory
[Yπόλειμμα από την απόσταξη απαλλαγμένου από φαινόλες και βάσεις ελαίου μεθυλοναφθαλινίου (από πίσσα ασφαλτούχου άνθρακα και υπολειμματικά έλαια πυρόλυσης) που αποστάζει μεταξύ 240 °C και 260 °C. Aποτελείται κυρίως από υποκατεστημένους δικυκλικούς αρωματικούς και ετεροκυκλικούς υδρογονάνθρακες.] (el)
C&L Inventory
[Zbytky z destilace methylnaftalenového oleje zbaveného fenolů a bází (z černouhelného dehtu a pyrolýzních zbytkových olejů) s rozmezím teploty varu 240 °C až 260 °C. Je složen převážně ze substituovaných dvoujaderných aromatických a heterocyklických uhlovodíků.] (cs)
C&L Inventory
[Zvyšok po destilácii metylnaftalénového oleja zbaveného fenolov a zásad (z čiernouhoľného dechtu a z zvyškových olejov z pyrolýzy). Má teplotu varu v rozmedzí od 240 °C do 260 °C. Pozostáva predovšetkým zo substituovaných dvojjadrových aromatických a heterocyklických uhľovodíkov.] (sk)
C&L Inventory
[Остатъчен продукт от от дестилация на получената след отстраняване на фенолите и основите метилнафталенова фракция (от битуминозен каменовъглен катран и от остатъчни фракции от пиролиза на каменовъглен катран) с температура на кипене в интервала от 240 °C до 260 °C (464 °F до 500 °F). Състои се основно от субституирани бициклени ароматни и хетероциклени въглеводороди.] (bg)
C&L Inventory
aceites del extracto (hulla), aceites residuales de pirólisis de alquitrán de hulla, aceite de naftaleno, residuos de destilación (es)
C&L Inventory
Alyvų ekstraktai (akmens anglys), akmens anglių pirolizės liekamosios alyvos, naftaleno alyva, distiliavimo likučiai (lt)
C&L Inventory
Ekstrahirana ulja (ugljen), ostatna pirolitička ulja ugljenog katrana, naftalensko ulje, dest. ostaci (hr)
C&L Inventory
ekstraksjonsoljer (kull), stenkulltjære og rester av pyrolyseoljer, naftalenolje, destillasjonsrester (no)
C&L Inventory
Ekstrakta eļļas (akmeņogles), akmeņogļu darvas-atlikuma pirolīzes eļļas, naftalīna eļļa, destilācijas atlikumi (lv)
C&L Inventory
ekstraktionsolier (stenkul), stenkulstjære rest-pyrolyseolier, naphthalenolie, destillationsrester (da)
C&L Inventory
ekstraktna olja (premog), oljni ostanki pirolize premogovega katrana, naftalensko olje, destilacijski ostanki (sl)
C&L Inventory
Ekstraktsiooni õlid (kivisüsi), kivisöetõrva pürolüüsi jääkõlid, naftaleenõli, destillatsiooni jäägid (et)
C&L Inventory
Extract de ţiţei (cărbune), uleiuri reziduale în urma pirolizei gudronului de cărbune, ţiţei naftenic, reziduuri de distilare (mt)
C&L Inventory
Extractieoliën (kool), koolteer en pyrolyse-residuoliën, naftaleenolie, destillatieresiduen (nl)
C&L Inventory
Extraktionsoljor (kol), stenkolstjära och rester av pyrolysolja, naftalenolja, destillationsåterstoder (sv)
C&L Inventory
Extraktum olajok (kőszén), kőszénkátrány-maradék pirolízis olajok, naftalinolaj, deszt. maradékok (hu)
C&L Inventory
Extraktöle (Kohle), Pyrolyseöle aus Kohlenteerrückständen, Naphthalinöl, Destillationsrückstände (de)
C&L Inventory
extrakčné oleje (uhoľné), z uhoľného dechtu a zo zvyškových olejov z pyrolýzy, naftalénové oleje, destilačné zvyšky (sk)
C&L Inventory
Extrakční oleje (černouhelné), zbytkové pyrolýzní oleje z černouhelného dehtu, naftalenový olej, destilační zbytky (cs)
C&L Inventory
fractions secondaires (fr)
C&L Inventory
Geherdestilleerde fracties (nl)
C&L Inventory
Huiles d'extraction (charbon), huiles résiduelles de pyrolyse de goudron de houille, huile de naphtalène, résidus de distillation (fr)
C&L Inventory
Jäännös sellaisen metyylinaftaleeniöljyn tislauksesta, josta on poistettu fenolit ja emäkset (ja joka on peräisin bitumikivihiilitervasta ja pyrolyysijäännösöljyistä), joka kiehuu noin alueella 240°C-260°C (464°F-500°F). Pääasiallinen koostumus: substituoidut dinukleaariset aromaattiset ja heterosykliset hiilivedyt. (fi)
C&L Inventory
Oleje ekstrakcyjne (węgiel), smoła węglowa – pozostałości olejów pirolitycznych , olej naftalenowy, pozostałości po destylacji (pl)
C&L Inventory
olii estratti (carbone), olii residui di pirolisi e catrame di carbone, olio di naftalene, residui della distillazione (it)
C&L Inventory
Omdestillat (sv)
C&L Inventory
redestilados (es)
C&L Inventory
Redestilati (hr)
C&L Inventory
Redestillaadid (et)
C&L Inventory
Redestillate (de)
C&L Inventory
Redestillater (da)
C&L Inventory
Redestiláty (cs)
C&L Inventory
Redestilāti (lv)
C&L Inventory
Redestylaty (pl)
C&L Inventory
Redesztillátumok (hu)
C&L Inventory
Redistilate (mt)
C&L Inventory
Redistiliatai (lt)
C&L Inventory
Residu van de destillatie van, van fenolen en basen ontdane, methylnaftaleenolie (afkomstig uit bitumineuze koolteer en pyrolyse-residuoliën) met een kooktraject van 240 °C tot 260 °C. Bestaat voornamelijk uit gesubstitueerde bicyclische aromatische en heterocyclische koolwaterstoffen. (nl)
C&L Inventory
residuo de la destilación de aceite de metilnaftaleno desfenolado y desbasificado (de alquitrán de hulla bituminosa y aceites residuales de pirólisis) con un intervalo de ebullición de 240 °C a 260 °C; compuesto principalmente de hidrocarburos aromáticos y heterocíclicos dinucleares sustituidos (es)
C&L Inventory
Residuo proveniente dalla distillazione di olio metilnaftalenico privo di fenoli e basi (proveniente da catrame di carbone bituminoso e olii residui di pirolisi) con intevallo di ebollizione 240 °C - 260 °C. (da 464°F a 500°F). Composto prevalentemente da idrocarburi aromatici biciclici ed eterociclici sostituiti. (it)
C&L Inventory
Rest fra destillationen af methylnaphthalenolie (fra tjære fra bituminøse kul og pyrolyserestolier), der er befriet for phenol og baser, med et kogeinterval fra 240 °C til 260 °C (464 ºF til 500 ºF). Sammensat primært af substituerede bicykliske aromatiske og heterocycliske carbonhydrider. (da)
C&L Inventory
Resíduo da destilação de óleo de metilnaftaleno (de alcatrão de carvão betuminoso e de óleos residuais de pirólise) desfenolizado e desbasificado, com intervalo de destilação de 240 °C a 260 °C. É constituído principalmente por hidrocarbonetos heterocíclicos e aromáticos bicíclicos substituídos. (pt)
C&L Inventory
Reziduul rezultat în urma distilării ţiţeiului metilnaftalinic din care au fost îndepărtate bazele şi fenolul (din gudronul cărbunelui bituminos şi uleiuri de piroliză reziduale) cu punct de fierbere la temperaturi cuprinse între 240°C şi 260°C (464°F şi 500°F). Compus cu precădere din hidrocarburi cu două nuclee aromatice substituite şi hidrocarburi heterociclice. (mt)
C&L Inventory
ridistillati (it)
C&L Inventory
Résidu obtenu par distillation d'huile de méthylnaphtalène débasée et déphénolée (des huiles résiduelles de pyrolyse de goudron de houille bitumineux), dont le point d'ébullition se situe approximativement entre 240 °C et 260 °C. Se compose principalement d'hydrocarbures aromatiques bicycliques et hétérocycliques substitués. (fr)
C&L Inventory
Uudelleentislaukset (fi)
C&L Inventory
Uuteöljyt (kivihiili), kivihiilitervan jäännöspyrolyysiöljyt, naftaleeniöljy, tislausjäännökset (fi)
C&L Inventory
Återstoder från destillation av metylnaftalenolja (från bituminös stenkolstjära och rester av pyrolysolja), befriad från fenoler och baser, med ungefärligt kokpunktsintervall från 240 °C till 260 °C. Består främst av substituerade, bicykliska aromatiska och heterocykliska kolväten. (sv)
C&L Inventory
Óleos de extracção (carvão), alcatrão de carvão e óleos residuais de pirólise, óleo de naftaleno, resíduos de destilação (pt)
C&L Inventory
έΈλαια εκχύλισης (άνθρακα), λιθανθρακόπισσας-υπολειμματικών ελαίων πυρόλυσης, ελαίου ναφθαλινίου, υπολείμματα απόσταξης (el)
C&L Inventory
Επαναπόσταγμα (el)
C&L Inventory
Екстракционна фракция (каменни въглища), остатъчни фракции от пиролиза на каменовъглен катран, нафталенова фракция, остатъчни продукти от дестилация (bg)
C&L Inventory
Редестилати (bg)
C&L Inventory
CAS names
Extract oils (coal), coal tar-residual pyrolysis oils, naphthalene oil, distn. residues
Other
Other identifiers
122070-80-8
EC Inventory, C&L Inventory, Pre-Registration process, Other
CAS number
648-040-00-3
C&L Inventory
Index Number

Categories Display


Route: .live1