Substance Information

NB: Registration status and tonnage

  • The REACH Registered substance portal was updated on 9th November 2020; the REACH registered factsheets were further updated on 21st December 2020. Details of the improvements can be found at Dissemination Platform Updates. Reprocessing the entire dataset is ongoing since 21 December 2020. ECHA is making all possible efforts to synchronise the registration status and tonnage with the shortest delay.
  • While reprocessing is ongoing please note that substances whose registration dossiers are not yet processed can incorrectly state in the Infocard that they are not registered under REACH. In these cases if there is a link to a REACH registered substance factsheet then the substance IS registered. The correct total tonnage band can be found in the factsheet(s) for the substance.

Substance Infocard

IC

Hydrocarbon oils, arom., mixed with polystyrene, pyrolyzed, light oil fraction

The oil obtained from the heat treatment of polystyrene with coal tar pitch or aromatic oils. It consists predominantly of benzene and its homologs boiling in a range of approximately 70°C to 210°C (158°F to 410°F).

Help Substance identity

The ‘Substance identity’ section is calculated from substance identification information from all ECHA databases. The substance identifiers displayed in the InfoCard are the best available substance name, EC number, CAS number and/or the molecular and structural formulas.

Some substance identifiers may have been claimed confidential, or may not have been provided, and therefore not be displayed.

EC (European Community) Number

The EC Number is the numerical identifier for substances in the EC Inventory. The EC Inventory is a combination of three independent European lists of substances from the previous EU chemicals regulatory frameworks (EINECS, ELINCS and the NLP-list). More information about the EC Inventory can be found here.

If the substance was not covered by the EC Inventory, ECHA attributes a list number in the same format, starting with the numbers 6, 7, 8 or 9.

The EC or list number is the primary substance identifier used by ECHA.

CAS (Chemical Abstract Service) registry number

The CAS number is the substance numerical identifier assigned by the Chemical Abstracts Service, a division of the American Chemical Society, to substances registered in the CAS registry database. A substance identified primarily by an EC or list number may be linked with more than one CAS number, or with CAS numbers that have been deleted. More information about CAS and the CAS registry can be found here.

Molecular formula

The molecular formula identifies each type of element by its chemical symbol and identifies the number of atoms of each element found in one discrete molecule of the substance. This information is only displayed if the substance is well–defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.

Molecular structure

The molecular structure is based on structures generated from information available in ECHA’s databases. If generated, an InChI string will also be generated and made available for searching. This information is only displayed if the substance is well-defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.

More help available here.

EC / List no.: 309-749-0

CAS no.: 100801-66-9

Mol. formula:

formula
Help Hazard classification and labelling

The ‘Hazard classification and labelling’ section shows the hazards of a substance based on the standardised system of statements and pictograms established under the CLP (Classification Labelling and Packaging) Regulation. The CLP Regulation makes sure that the hazards presented by chemicals are clearly communicated to workers and consumers in the European Union. The CLP Regulation uses the UN Global Harmonised System (GHS) and European Union Specific Hazard Statements (EUH).

This section is based on three sources for information (harmonised classification and labelling (CLH), REACH registrations and CLP notifications). The source of the information is mentioned in the introductory sentence of the hazard statements. When information is available in all sources, the first two are displayed as a priority.

Please note:

The purpose of the information provided under this section is to highlight the substance hazardousness in a readable format. It does not represent a new labelling, classification or hazard statement, neither reflect other factors that affect the susceptibility of the effects described, such as duration of exposure or substance concentration (e.g. in case of consumer and professional uses). Other relevant information includes the following:

  • Substances may have impurities and additives that lead to different classifications. If at least one company has indicated that the substance classification is affected by impurities or additives, this will be indicated by an informative sentence. However, substance notifications in the InfoCard are aggregated independently of the impurities and additives.
  • Hazard statements were adapted to improve readability and may not correspond textually to the hazard statements codes description in the European Union Specific Hazard Statements (EUH) or the UN Global Harmonised System (GHS).

To see the full list of notified classifications and to get more information on impurities and additives relevant to classification please consult the C&L Inventory.

More information about Classification and Labelling is available in the Regulations section of ECHA website.

More help available here.

Harmonised classification and labelling (CLH)

Harmonised classification and labelling is a legally binding classification and labelling for a substance, agreed at European Community level. Harmonisation is based on the substance’s physical, toxicological and eco-toxicological hazard assessment.

The ‘Hazard classification’ and labelling section uses the signal word, pictogram(s) and hazard statements of the substance under the harmonised classification and labelling (CLH) as its primary source of information.

If the substance is covered by more than one CLH entry (e.g. disodium tetraborate EC no. 215–540–4, is covered by three harmonisations: 005–011–00–4; 005–011–01–1 and 005–011–02–9), CLH information cannot be displayed in the InfoCard as the difference between the CLH classifications requires manual interpretation or verification. If a substance is classified under multiple CLH entries, a link to the C&L Inventory is provided to allow users to view CLH information associated with the substance and no text is automatically generated for the InfoCard.

It is possible that a harmonisation is introduced through an amendment to the CLP Regulation. In that case, the ATP (Adaptation to Technical Progress) number is displayed.

More info on CLH can be found here.

Classification and labelling under REACH

If available, additional information on classification and labelling (C&L) is derived from REACH registration dossiers submitted by industry. This information has not been reviewed or verified by ECHA, and may change without prior notice. REACH registration dossiers have greater data requirements (such as supporting studies) than do notifications under CLP.

Notifications under the Classification Labelling and Packaging (CLP) Regulation

If no EU harmonised classification and labelling exists and the substance was not registered under REACH, information derived from classification and labelling (C&L) notifications to ECHA under CLP Regulation is displayed under this section. These notifications can be provided by manufacturers, importers and downstream users. ECHA maintains the C&L Inventory, but does not review or verify the accuracy of the information.

Note that for readability purposes, only the pictograms, signal words and hazard statements referred in more than 5% of the notifications under CLP are displayed.

There is no harmonised classification and there are no notified hazards by manufacturers, importers or downstream users for this substance.

about INFOCARD - Last updated: 19/06/2021 InfoCard

The InfoCard summarises the non-confidential data of a substance held in the databases of the European Chemicals Agency (ECHA). InfoCards are generated automatically based on the data available at the time of generation.

The quality and correctness of the information submitted to ECHA remains the responsibility of the data submitter. The type of uses and classifications may vary between different submissions to ECHA and for a full understanding it is recommended to consult the source data. Information on applicable regulatory frameworks is also automatically generated and may not be complete or up to date. It is the responsibility of the substance manufacturers and importers to consult official publications, e.g. the electronic edition of the Official Journal of the European Union.

InfoCards are updated when new information is available. The date of the last update corresponds to the publication date of the InfoCard and not necessarily to the date in which the update occurred in the source data.

More help available here.

Help Help

Key datasets

Help Help

Regulatory context

Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):

REACH - Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation
Previous Legislations
  • Substances listed in the EINECS, ELINCS, or NLP inventories.
Active Implantable Medical Devices Directive
  • Active Implantable Medical Devices Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of Directive 90/385/EEC on Active Implantable Medical Devices, 20 July 1990, amended by Directive 2007/47/EC, 21 September 2007

    This list contains hazardous substances for purposes of Directive 90/385/EEC on active implantable medical devices, particularly as regards Article 3 and Annex I (Essential Requirements). This non-exhaustive database is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list).

CAD - Chemical Agents Directive
  • CAD - Chemical Agents Directive, Article 2(b)(i) - Hazardous Agents
    EU. Hazardous Substances - Article 2(b)(i), Directive 98/24/EC on Protection of Workers from Chemical Agent-related Risks, 5 May 1998 (Table 3 of Annex VI to CLP, as amended)

    This list contains a non-exhaustive inventory based on the list of substances with harmonised classification and labelling (i.e., Table 3 of Annex VI to the CLP Regulation 1272/2008/EC). While the harmonised list covers many hazardous substances, others not listed may also meet the classification criteria in accordance with the CLP Regulation.

CMD - Carcinogens and Mutagens Directive
  • Carc and Muta Directive, Annex I - Substances, Mixtures & Processes
    EU. Substances, Mixtures, Related Processes: Annex I & Article 2, Directive 2004/37/EC (CMD), as amended by Directive 2019/130/EU, 31 January 2019

    This list contains a non-exhaustive inventory of substances based on Art. 2 carcinogen and mutagen (CM) definitions and Annex I of the Carcinogens and Mutagens Directive. Category 1A and 1B carcinogens and mutagens are derived from the CLP Regulation's Table 3 of Annex VI (1272/2008/EC). Employers are obligated to minimize worker exposure to these agents as far as possible, and must arrange for medical surveillance of workers exposed to these substances.

Construction Products Regulation
  • Construction Product Regulation - Annex I (3) - Hazardous Substances
    EU. Hazardous Substances for Purposes of Annex I (3) (Requirements for Construction Works), Regulation 305/2011/EU on Marketing of Construction Products, amended by Regulation 574/2014/EU, 28 May 2014

    This list contains a non-exhaustive inventory of substances taken from: (1) Table 3 of Annex VI to CLP; (2) the Candidate List of SVHCs; (3) Annex XIV of REACH (Authorisation List); (4) Annex XVII of REACH (Restrictions List); (5) F-gases subject to emission limits/reporting per Regulation 517/2014/EU; and (6) volatile organic compounds (VOCs) listed in the Ambient Air Directive 2008/50/EC. The basis of the list is Annex I(3) of the Construction Products Regulation 305/2011/EC, which stipulates that construction works must not have a high impact on human health or the environment as a result of: giving off toxic gas; emissions of dangerous substances, volatile organic compounds (VOC), greenhouse gases or dangerous particles into indoor or outdoor air; release of dangerous substances into drinking water, ground water, marine waters, surface waters or soil.

  • Construction Product Regulation - Article 6(5) - SDS and Declaration
    EU. Hazardous Substances Subject to Declaration (Article 6(5)), Regulation 305/2011/EU on Marketing of Construction Products, amended by Regulation 574/2014/EU, 28 May 2014

    This list contains a non-exhaustive inventory of substances originating from: (1) Table 3 of Annex VI to CLP (i.e., the list of harmonised substances); (2) the Candidate List of Substances of Very High Concern (SVHCs); and REACH Annex XIV (Authorisation List). This list is compiled on the basis of Article 6(5) of Regulation 305/2011/EC on Marketing of Construction Products. This provision requires SDSs and information on hazardous substances (i.e., SVHCs) contained in construction products be provided with the declaration of performance.

Cosmetic Products Regulation
  • Cosmetic Products Regulation, Annex II - Prohibited Substances
    EU. Prohibited Substances: Annex II, Regulation 1223/2009/EC on Cosmetic Products, as amended by Regulation (EU) 2020/1683, 13 November 2020

    This list contains substances which are banned from use in any cosmetic products marketed for sale or use in the European Union.

EU Ecolabel Regulation
  • Ecolabels - Restrictions for Hazardous Substances/Mixtures
    EU. Substances Rendering Goods Ineligible for EU Ecolabel, Article 6(6), Regulation 66/2010/EC, L 27/1, 30 January 2010 (Table 3 of Annex VI to CLP; Candidate List of SVHCs)

    This list contains: (1) the hazardous substances with harmonised classifications and labelling (i.e., Table 3 of Annex VI to CLP Regulation); and (2) the Candidate List of substances of very high concern (SVHC). The EU Ecolabel may not be awarded to substances or mixtures classified as such. Note that this list is not exhaustive. While the harmonised list covers many hazardous substances, others not listed may also meet classification criteria in accordance with the CLP Regulation.

End-of-Life Vehicles Directive
  • End-of-Life Vehicles Directive - Hazardous Substances
    EU. Hazardous Substances per Article 2(11) of End-of-Life Vehicles Directive 2000/53/EC, 21 October 2000, amended by Directive 2020/363/EU, 5 March 2020 (based on Table 3/Annex VI of CLP)

    This list contains a non-exhaustive inventory of hazardous substances as defined by Article 2(11) of the End-of-Life Vehicles Directive 2000/53/EC. It is based on the relevant subset of substances with harmonised classification listed in Table 3 of Annex VI to the CLP Regulation 1272/2008/EC.

Food Contact Active and Intelligent Materials and Articles Regulation
  • Active and Intelligent Materials - CMR Substances not allowed for use
    EU. Carcinogens, Mutagens and Reproductive substances Not Allowed for Use in Components of Active and Intelligent Materials and Articles (Article 5(2)(c)(i)), Regulation 450/2009/EC, 30 May 2009

    This list contains a non-exhaustive list of Carcinogens, Mutagens and Reproductive substances (CMRs) that are not allowed for use in components of active and intelligent materials and articles per Art. 5(2)(c)(i) of Regulation 450/2009/EC. The list is derived from a subset of substances on Table 3 of Annex VI to the CLP Regulation (1272/2008/EC).

General Product Safety Directive
  • General Product Safety Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of General Product Safety Directive (2001/95/EC), 15 January 2002, amended by Reg 596/2009/EC, 18 July 2009

    This list contains a non-exhaustive inventory of substances that fall within the European Union's hazardous substance definitions, as provided on: (1) Table 3 of Annex VI to the CLP Regulation 1272/2008/EC; (2) Annex III of Directive 2000/54/EC (Biological Agents); Candidate List of SVHCs; and REACH Annexes XIV and XVII (Authorisation and Restriction lists). They can be considered hazardous for purposes of the General Product Safety Directive 2001/95/EC.

In Vitro Diagnostic Medical Devices Directive
  • In Vitro Diagnostic Medical Devices Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of Article 3 & Annex I (Essential Requirements), Directive 98/79/EC on In Vitro Diagnostic Medical Devices, 7 December 1998

    This list contains a non-exhaustive inventory of hazardous substances for purposes of essential requirements (Article 3 and Annex I) for general safety, design, manufacture and hazard communication of in vitro diagnostic medical devices. It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list).

Marine Environmental Policy Framework Directive
  • Marine Environmental Policy Framework Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of Directive 2008/56/EC (Marine Strategy Framework Directive), 25 June 2008, amended by Directive 2017/845/EU, 18 May 2017

    This list contains a non-exhaustive inventory of hazardous substances for purposes of the Marine Strategy Framework Directive, especially as it concerns Art. 3(8), and Annexes I and III. The listed substances meet the European Union's definitions as hazardous, as provided on: (1) Table 3 of Annex VI to the CLP Regulation (1272/2008/EC); (2) Annex III of Directive 2000/54/EC (Biological Agents); Candidate List of SVHCs; and REACH Annex XIV (Authorisation List).

Medical Devices Directive
  • Medical Devices Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of Medical Devices Directive 93/42/EEC, 12 July 1993, amended by Directive 2007/47/EC, 21 September 2007

    This list contains hazardous substances in accordance with the Medical Devices Directive's (MDD) design and construction requirements pursuant to Annex I, Part II (7) & (8) (i.e., chemical, physical and biological properties; and infection and microbial contamination). Specifically, the non-exhaustive database is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list).

Protection of Pregnant and Breastfeeding Workers Directive
  • Protection of Pregnant and Breastfeeding Workers Directive, Annex I+II
    EU. Chemical Agents: Annexes I & II, Directive 92/85/EEC on Pregnant Workers, 28 November 1992 (updated by table 3 of Annex VI to CLP, 5 October 2018)

    This list contains a non-exhaustive inventory of substances to which pregnant workers and workers who have recently given birth or are breastfeeding may not be exposed. Employers are obligated to prevent the exposure of these workers to any agents that may have adverse health effects on either mother or child. The inventory originates from Table 3 of Annex VI to the CLP.

Protection of Young People Directive
  • Physical, Biological and Chemical Agents & Processes and Work
    EU. Non-Exhaustive List of Banned Substances, Directive 94/33/EC on Young People at Work, 20 August 1994, as amended by Dir 2014/27/EU, March 5, 2014 (Based on Table 3 of Annex VI to CLP, inter alia)

    This list contains biological and chemical agents, in accordance with Art. 7 and points 2 and 3 of the Annex to Directive 94/33/EC, to which young persons (under 18 years of age) may not be exposed at the workplace. The list is a non-exhaustive inventory of such substances based on: 1) agents of risk groups 3 and 4 under Directive 2000/54/EC; 2) Table 3 of Annex VI to the CLP Regulation; 3) and Annex I of Directive 2004/37/EC.

Safety and Health of Workers at Work Directive
  • Safety and Health of Workers at Work Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of Directive 89/391/EEC, 29 June 1989, amended by Regulation 1137/2008/EC, 21 November 2008 (Table 3/Annex VI, CLP; Annex III, 2000/54/EC)

    This list contains a non-exhaustive inventory of substances that fall within the scope of the European Union's definition of hazardous chemical and biological substances, as provided on: (1) Table 3 of Annex VI to the CLP Regulation 1272/2008/EC; and (2) Annex III of Directive 2000/54/EC (Biological Agents). The EU's Occupational Safety and Health (OSH) Framework Directive 89/391/EEC applies to risks arising from chemical, physical and biological agents at the workplace.

Safety and/or Health Signs at Work Directive
  • Workplace Signs - minimum requirements & signs on containers and pipes
    EU. Workplace Signage: Annexes I and III, Directive 92/58/EEC, last amended by Directive 2014/27/EU, 5 March 2014

    This list contains hazardous substances based on Table 3 of Annex VI to the CLP Regulation 1272/2008/EC. According to the annexes to Directive 92/58/EEC, storage areas and containers containing chemical substances or mixtures that are classified as hazardous according to the CLP Regulation must be duly marked and/or labeled. Directive 92/58/EEC requires employers to ensure proper signage is posted in areas where hazards cannot be avoided or reduced.

WFD - Waste Framework Directive
  • Waste Framework Directive, Annex III - Waste - Hazardous Properties
    EU. Substances according to Hazardous Waste Properties: Annex III, Directive 2008/98/EC, 22 November 2008, amended by Directive 2018/851/EU, 14 June 2018

    This list contains substances that have been assigned hazard property (HP) waste codes 1-15, as defined in terms of the hazard class and category, hazard (H) statement, and/or concentration limits provided in Annex III of the Waste Framework Directive 2008/98/EC. The classifications of the substances listed in the list are based on their harmonised classifications per Table 3 of Annex VI to the CLP Regulation 1272/2008/EC.

Help Help

Substance names and other identifiers

Regulatory process names
[The oil obtained from the heat treatment of polystyrene with coal tar pitch or aromatic oils. It consists predominantly of benzene and its homologs boiling in a range of approximately 70°C to 210°C (158°F to 410°F).]
The oil obtained from the heat treatment of polystyrene with coal tar pitch or aromatic oils. It consists predominantly of benzene and its homologs boiling in a range of approximately 70°C to 210°C (158°F to 410°F).
C&L Inventory
Heat Treatment Products
The oil obtained from the heat treatment of polystyrene with coal tar pitch or aromatic oils. It consists predominantly of benzene and its homologs boiling in a range of approximately 70°C to 210°C (158°F to 410°F).
C&L Inventory, EU Ecolabels - Restrictions for Hazardous Substances/Mixtures
Hydrocarbon oils, arom., mixed with polystyrene, pyrolyzed, light oil fraction
EC Inventory, Pre-Registration process, Cosmetic Products Regulation, Annex II - Prohibited Substances, EU Ecolabels - Restrictions for Hazardous Substances/Mixtures, Other
Hydrocarbon oils, arom., mixed with polystyrene, pyrolyzed, light oil fraction
The oil obtained from the heat treatment of polystyrene with coal tar pitch or aromatic oils. It consists predominantly of benzene and its homologs boiling in a range of approximately 70°C to 210°C (158°F to 410°F).
C&L Inventory, Pre-Registration process, Cosmetic Products Regulation, Annex II - Prohibited Substances, EU Ecolabels - Restrictions for Hazardous Substances/Mixtures, Other
Hydrocarbon oils, arom., mixed with polystyrene, pyrolyzed, light oil fraction; Heat Treatment Products [he oil obtained from the heat treatment of polystyrene with coal tar pitch or aromatic oils.; It consists predominantly of benzene and its homologs boiling in a range of approximately 70 °C to 210 °C (158 °F to 410°F).]
The oil obtained from the heat treatment of polystyrene with coal tar pitch or aromatic oils. It consists predominantly of benzene and its homologs boiling in a range of approximately 70°C to 210°C (158°F to 410°F).
CAD - Chemical Agents Directive, Art. 2(b)(i) - Hazardous Agents, Construction Product Regulation - Annex I (3) - Hazardous Substances, Construction Product Regulation - Art. 6(5) - SDS and Declaration, End-of-Life Vehicles Directive - Hazardous Substances, Active Implantable Medical Devices Directive - Hazardous Substances, In Vitro Diagnostic Medical Devices Directive - Hazardous Substances, Marine Environmental Policy Framework Directive - Hazardous Substances, Medical Devices Directive - Hazardous Substances, Protection of Pregnant and Breastfeeding Workers Directive, Annex I+II, General Product Safety Directive - Hazardous Substances, Safety and Health of Workers at Work Directive - Hazardous Substances, Waste Framework Directive, Annex III - Waste - Hazardous Properties, Fertiliser Regulation- Annex I, E.3 (chelating and complexing agents)
Hydrocarbon oils, arom., mixed with polystyrene, pyrolyzed, light oil fraction; Heat Treatment Products
The oil obtained from the heat treatment of polystyrene with coal tar pitch or aromatic oils. It consists predominantly of benzene and its homologs boiling in a range of approximately 70°C to 210°C (158°F to 410°F).
FCM Active and Intelligent Materials - CMRs not allowed for use, Workplace Signs - minimum requirements & signs on containers and pipes, Carc and Muta Directive, Annex I - Substances, Mixtures & Processes
Translated names
(Ulje dobiveno kod toplinske obrade polistirena smolom ugljenog katrana ili aromatskim uljima. Sastoji se pretežito od benzena i njegovih homologa koji vriju u području približno od 70 °C do 120 °C.) (hr)
C&L Inventory
(Õli, mis saadakse polüstüreeni termilisel töötlemisel kivisöetõrva pigi või aromaatsete õlidega. Koosneb peamiselt benseenist ja selle homoloogidest keemistemperatuuriga vahemikus ligikaudu 70 °C –210 °C.) (et)
C&L Inventory
[Alyva, gaunama termiškai apdorojant polistireno ir akmens anglių deguto pikio arba aromatinių alyvų mišinį. Ją sudaro daugiausia benzenas ir jo homologai, kurių virimo temperatūra maždaug nuo 70 °C iki 210 °C (nuo 158 °F iki 410 °F).] (lt)
C&L Inventory
[Eļļa iegūta, termiski apstrādājot polstirolu ar akmeņogļu darvas piķi vai aromātiskajām eļļām. Sastāv galvenokārt no benzola un tā homologiem, aptuvenā viršanas temperatūra no 70°C līdz 210°C (158°F līdz 410°F).] (lv)
C&L Inventory
[Olej získaný tepelným zpracováním polystyrenu s černouhelnou smolou nebo aromatickými oleji. Je složen převážně z benzene a jeho homologů s rozmezím teploty varu přibližně 70 °C až 210 °C.] (cs)
C&L Inventory
[Olej získavaný tepelnou úpravou zmesi polystyrénu a uhoľno-dechtovej smoly alebo aromatických olejov. Pozostáva predovšetkým z benzénu a jeho homológov. Má teplotu varu v rozmedzí približne od 70 °C do 210 °C.] (sk)
C&L Inventory
[Olje dannet ved varmebehandling av polystyren med stenkulltjærebek eller aromatiske oljer. Består hovedsakelig av benzen og dens homologer med omtrentlig kokepunktsintervall fra 70 °C til 210 °C (158 °F til 410 °F).] (no)
C&L Inventory
[Olje dobljeno pri toplotni obdelavi polistirena skupaj s smolo premogovega katrana ali aromatskimi olji. Sestoji pretežno iz benzena in njegovih homologov z vreliščem v območju približno med 70 °C in 210 °C.] (sl)
C&L Inventory
[Polisztirol kőszénkátrány szurok és aromás olajok keverékének hőkezeléssel kapott terméke. Főleg benzolból és homológjaiból áll, közelítő forrásponttartománya 70°C-tól 210°C-ig (158°F-től 410°F-ig) terjed.] (hu)
C&L Inventory
[To έλαιο που λαμβάνεται από τη θερμική κατεργασία πολυστυρολίου με άσφαλτο λιθανθρακόπισσας ή έλαια που περιέχουν αρωματικές ενώσεις. Συνίσταται κυρίως από βενζόλιο και ομόλογά του που αποστάζουν μεταξύ 70 °C και 210 °C περίπου.] (el)
C&L Inventory
[Öl, erhalten aus der Wärmebehandlung von Polystyrol gemischt mit Kohlenteerpech oder aromatischen Ölen; besteht vorwiegend aus Benzol und seinen Homologen mit einem Siedebereich von etwa 70 °C bis 210 °C] (de)
C&L Inventory
[Ţiţeiul obţinut prin tratarea termică a polistirenului cu smoala gudronului de cărbune sau uleiuri aromatice. Constă cu precădere în benzen şi omologii săi şi are un punct de fierbere cuprins între 70°C şi 210°C (158°F şi 410°F).] (ro)
C&L Inventory
[Фракция, получена от термично обработване на смес от полистирен с каменовъглен пекили ароматни фракции. Състои се основно от бензен и неговите хомолози, с температура на кипене в интервала приблизително от 70 до 210ºС (от 158°F до 410°F).] (bg)
C&L Inventory
aceite obtenido del tratamiento térmico de poliestireno con brea de alquitrán de hulla o aceites aromáticos; compuesto principalmente de benceno y sus homólogos con un intervalo de ebullición aproximado de 70 °C a 210°C (es)
C&L Inventory
aceites hidrocarbonados, aromáticos, mezclados con poliestireno, pirolizados, fracción de aceite ligero (es)
C&L Inventory
Angliavandenilių alyvos, aromatinės, mišinio su polistirenu pirolizė, lengvoji alyvos frakcija (lt)
C&L Inventory
aromatické uhľovodíkové oleje, získavané pyrolýzou zmesi s polystyrénom, ľahká olejová frakcia (sk)
C&L Inventory
Aromatyczne oleje węglowodorowe zmieszane z polistyrenem i poddane pirolizie, frakcja oleju lekkiego (pl)
C&L Inventory
carbonhydridolier, aromatiske, blandet med polystyren, pyrolyserede, let oliefraktion (da)
C&L Inventory
De olie die wordt verkregen uit de thermische behandeling van polystyreen met koolteerpek of aromatische oliën. Bestaat voornamelijk uit benzeen en homologen daarvan en heeft een kooktraject van ongeveer 70 °C tot 210 °C. (nl)
C&L Inventory
Hiilivetyöljyt, arom., sekoitettu polystyreenin kanssa, pyrolysoitu, kevytöljyfraktio (fi)
C&L Inventory
Huile obtenue par traitement thermique d'un mélange de polystyrène avec du brai de houille ou des huiles aromatiques. Se compose principalement de benzène et d'homologues, avec un point d'ébullition compris entre 70 °C et 210 °C. (fr)
C&L Inventory
Hydrocarbures aromatiques liquides, mélangés avec du polystyrène, pyrolysés, fraction huile légère;Produits résultant d'un traitement thermique;[huile obtenue par traitement thermique à partir de polystyrène avec du brai de houille ou des huiles aromatiques.Se compose principalement de benzène et de ses homologues; intervalle d'ébullition compris approximativement entre 70 et 210 oC (entre 158 et 410 oF).] (fr)
C&L Inventory
hydrokarbonoljer, aromatiske, blandet med polystyren, pyrolyserte, lett oljefraksjon (no)
C&L Inventory
Hőkezelés termékei (hu)
C&L Inventory
Kohlenwasserstofföle, aromatisch, gemischt mit Polystyrol, pyrolysiert, Leichtölfraktion (de)
C&L Inventory
Kolväteoljor, aromatiska, blandade med polystyren, pyrolyserade, lätt oljefraktion (sv)
C&L Inventory
Koolwaterstofoliën, aromatisch, gemengd met polystyreen, gepyrolyseerd, lichte oliefractie (nl)
C&L Inventory
Lämpökäsittelytuotteet (fi)
C&L Inventory
Ogļūdeņražu eļļas, arom., maisījumā ar polistirolu, pirolizētas, vieglo eļļu frakcija (lv)
C&L Inventory
Olej otrzymywany z obróbki cieplnej mieszaniny polistyrenu z pakiem węglowym lub olejami aromatycznymi. Składa się przede wszystkim z benzenu i jego homologów wrzących w zakresie temp. ok. 70-120°C. (pl)
C&L Inventory
Olie opnået ved varmebehandling af polystyren med kultjærebeg eller aromatiske olier. Den består overvejende af benzen og dens homologer, med kogeinterval omtrent fra 70 °C til 210 °C (158 ºF til 248 ºF). (da)
C&L Inventory
olii idrocarburici, aromatici, miscelati con polistirene, pirolizzati, frazione olio leggero (it)
C&L Inventory
Olio ottenuto dal trattamento a caldo di polistirene con pece di catrame di carbone o olii aromatici. È costituito prevalentemente da benzene e suoi omologhi con punto di ebollizione nell'intervallo 70 °C - 210 °C ca. (da 158°F a 410°F). (it)
C&L Inventory
Olja erhållen genom värmebehandling av polystyren med koltjärebeck eller aromatiska oljor. Består främst av bensen och dess homologer, med ungefärligt kokpunktsintervall från 70 °C till 210 °C. (sv)
C&L Inventory
olja na osnovi ogljikovodikov, aromatska, s primesmi polistirena, pirolizirana, frakcija lahkega olja (sl)
C&L Inventory
prodotti da trattamento termico (it)
C&L Inventory
productos de tratamiento térmico (es)
C&L Inventory
produits traités thermiquement (fr)
C&L Inventory
Produkti termičke obrade (hr)
C&L Inventory
produkti toplotne obdelave (sl)
C&L Inventory
Produkty procesów termicznych (pl)
C&L Inventory
produkty tepelnej úpravy (sk)
C&L Inventory
Produtos de tratamento térmico (pt)
C&L Inventory
Produşi ai tratamentului termic (mt)
C&L Inventory
Produşi ai tratamentului termic (ro)
C&L Inventory
Szénhidrogén olajok, arom., polisztirollal kevert, pirolizált, könnyűolaj frakció (hu)
C&L Inventory
Süsivesinikõlid, aromaatsed, segatud polüstüreeniga, pürolüüsitud, kerge õli fraktsioon (et)
C&L Inventory
Tepelně zpracované produkty (cs)
C&L Inventory
Termilise töötlemise produktid (et)
C&L Inventory
Terminio apdorojimo produktai (lt)
C&L Inventory
Termoapstrādes produkti (lv)
C&L Inventory
Thermisch behandelde producten (nl)
C&L Inventory
Ugljikovodična ulja, aromati, miješana s polistirenom, pirolizirana, frakcija lakog ulja (hr)
C&L Inventory
Uhlovodíkové oleje, aromatické, směs s polystyrenem, pyrolyzované, frakce lehkého oleje (cs)
C&L Inventory
Varmebehandlede produkter (da)
C&L Inventory
varmebehandlede produkter (no)
C&L Inventory
Värmebehandlade produkter (sv)
C&L Inventory
Wärmebehandlungsprodukte (de)
C&L Inventory
Óleo obtido por tratamento térmico de uma mistura de poliestireno com breu de alcatrão de carvão ou óleos aromáticos. É constituído predominantemente por benzeno e homólogos com intervalo de destilação aproximado de 70 °C a 210 °C. (pt)
C&L Inventory
Óleos de hidrocarbonetos, aromáticos, misturados com poliestireno, pirolisados, fracção do óleo leve (pt)
C&L Inventory
Öljy, joka on saatu polystyreenin, jonka kanssa on kivihiilitervapikeä tai aromaattisia öljyjä, lämpökäsittelystä. Koostuu pääasiassa bentseenistä ja sen homologeista, jotka kiehuvat likimäärin välillä 70°C-120°C (158°F-410°C). (fi)
C&L Inventory
Ţiţei hidrocarbonat, aromatic, combinat cu polistiren, pirolizat, fracţia uşoară de ţiţei (mt)
C&L Inventory
Ţiţei hidrocarbonat, aromatic, combinat cu polistiren, pirolizat, fracţia uşoară de ţiţei (ro)
C&L Inventory
Ţiţeiul obţinut prin tratarea termică a polistirenului cu smoala gudronului de cărbune sau uleiuri aromatice. Constă cu precădere în benzen şi omologii săi şi are un punct de fierbere cuprins între 70°C şi 210°C (158°F şi 410°F). (mt)
C&L Inventory
έλαιαΈλαια υδρογονανθράκων, με αρωματικές ενώσεις, σε μείγματα με πολυστυρόλιο, πυρολυμένα, κλάσμα ελαφρού ελαίου (el)
C&L Inventory
Προϊόντα θερμικής κατεργασίας (el)
C&L Inventory
Въглеводородни фракции, ароматни, смесени с полистирен, пиролизирани, леки фракции (bg)
C&L Inventory
Продукти от термично обработване (bg)
C&L Inventory
CAS names
Hydrocarbon oils, arom., mixed with polystyrene, pyrolyzed, light oil fraction
Other
Other identifiers
100801-66-9
EC Inventory, C&L Inventory, Pre-Registration process, FCM Active and Intelligent Materials - CMRs not allowed for use, CAD - Chemical Agents Directive, Art. 2(b)(i) - Hazardous Agents, Construction Product Regulation - Annex I (3) - Hazardous Substances, Construction Product Regulation - Art. 6(5) - SDS and Declaration, Cosmetic Products Regulation, Annex II - Prohibited Substances, EU Ecolabels - Restrictions for Hazardous Substances/Mixtures, End-of-Life Vehicles Directive - Hazardous Substances, Active Implantable Medical Devices Directive - Hazardous Substances, In Vitro Diagnostic Medical Devices Directive - Hazardous Substances, Marine Environmental Policy Framework Directive - Hazardous Substances, Medical Devices Directive - Hazardous Substances, Protection of Pregnant and Breastfeeding Workers Directive, Annex I+II, General Product Safety Directive - Hazardous Substances, Workplace Signs - minimum requirements & signs on containers and pipes, Safety and Health of Workers at Work Directive - Hazardous Substances, Waste Framework Directive, Annex III - Waste - Hazardous Properties, Carc and Muta Directive, Annex I - Substances, Mixtures & Processes, Fertiliser Regulation- Annex I, E.3 (chelating and complexing agents), Other
CAS number
648-136-00-5
C&L Inventory
Index Number

Categories Display