Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 620-056-5 | CAS number: 874195-61-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Biodegradation in water and sediment: simulation tests
Administrative data
Link to relevant study record(s)
- Endpoint:
- biodegradation in water and sediment: simulation testing, other
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: GLP Guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 308 (Aerobic and Anaerobic Transformation in Aquatic Sediment Systems)
- Version / remarks:
- 2002
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 835.4400 (Anaerobic Aquatic Metabolism)
- Version / remarks:
- 2008
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- Ministerium für Arbeit, Gesundheit und Soziales des Landes Nordrhein-Westfalen
- Radiolabelling:
- yes
- Oxygen conditions:
- anaerobic
- Inoculum or test system:
- natural water / sediment
- Details on source and properties of surface water:
- WATER SAMPLES:
The systems were freshly sampled and waters and sediments sieved to ≤ 2 mm:
1. Lawrence, Kansas, USA: GPS Coordinates: N 39° 03.0’ W 095° 11.6’; Research farm pond
2. Pikeville, North Carolina, USA: GPS Coordinates: N 35° 29.1’ W 078° 02.6’; Farm pond
PHYSICO-CHEMICAL CHARACTERIZATION:
pH water at time of collection
1. Lawrence, Kansas, USA: 8.1
2. Pikeville, North Carolina, USA: 7.1
TOC water [mg/L]
1. Lawrence, Kansas, USA: 5.3
2. Pikeville, North Carolina, USA: 10.3
Total nitrogen water [mg/L]
1. Lawrence, Kansas, USA: 0.4
2. Pikeville, North Carolina, USA: 1.1
Total phosphorous water [mg/L]
1. Lawrence, Kansas, USA: 1.2
2. Pikeville, North Carolina, USA: 1.2
Water hardness [mg/L]
1. Lawrence, Kansas, USA: 95 mg/L
2. Pikeville, North Carolina, USA: 21 mg/L - Details on source and properties of sediment:
- SEDIMENT SAMPLES:
The systems were freshly sampled and waters and sediments sieved to ≤ 2 mm:
1. Lawrence, Kansas, USA: GPS Coordinates: N 39° 03.0’ W 095° 11.6’; Research farm pond
2. Pikeville, North Carolina, USA: GPS Coordinates: N 35° 29.1’ W 078° 02.6’; Farm pond
PHYSICO-CHEMICAL CHARACTERIZATION:
Textural classification:
1. Lawrence, Kansas, USA: silty clay loam
Sand [50 μm – 2 mm] = 15%
Silt [2 μm – 50 μm] = 45%
Clay [< 2 μm] = 20%
2. Pikeville, North Carolina, USA: silt loam
Sand [50 μm – 2 mm] = 29%
Silt [2 μm – 50 μm] = 71%
Clay [< 2 μm] = 0%
pH at time of collection
1. Lawrence, Kansas, USA: 7.7
2. Pikeville, North Carolina, USA: 5.5
Organic matter [%]
1. Lawrence, Kansas, USA: 2.2
2. Pikeville, North Carolina, USA: 0.8
Organic carbon [%]
1. Lawrence, Kansas, USA: 1.3
2. Pikeville, North Carolina, USA: 0.4
Total nitrogen [mg/kg]
1. Lawrence, Kansas, USA: 900
2. Pikeville, North Carolina, USA: 100
Total phosphorous [mg/kg]
1. Lawrence, Kansas, USA: 104
2. Pikeville, North Carolina, USA: 42
CEC [meq/100 g]
1. Lawrence, Kansas, USA: 23.3
2. Pikeville, North Carolina, USA: 2.9
Moisture [%]
1. Lawrence, Kansas, USA: 138
2. Pikeville, North Carolina, USA: 23
Bulk densitiy [g/cm3]
1. Lawrence, Kansas, USA: 1.0
2. Pikeville, North Carolina, USA: 1.46 - Duration of test (contact time):
- > 100 d
- Initial conc.:
- 75 µg/L
- Based on:
- act. ingr.
- Parameter followed for biodegradation estimation:
- radiochem. meas.
- Details on study design:
- EXPERIMENTAL DESIGN
The test systems consisted of Erlenmeyer flasks each containing a water-to-sediment weight ratio of 3:1, corresponding to 150 or 180 mL water and 50 or 60 g sediment dry weight, repectively. For equilibration to anaerobic conditions, the test vessels were equipped with mineral oil traps, flushed with nitrogen and the test systems were set under an atmosphere of nitrogen. During the incubation under anaerobic conditions, the test vessels were quipped with double-valved tops, which were connected at each sampling interval to trapping solutions for the collection of volatiles.
- Oxygen conditions: Anaerobic
- Light conditions: Dark
- Temperature: mean 19.9 ± 0.2 °C
- Stock solution: Prepared by obtaining 0.100 mL of the [14C]triafamone standard (47.1 μCi, 460 μg) in acetonitrile, evaporating solvent just to dryn ss under nitrogen, and re-dissolving to 8.0 mL with methanol. The concentration was determined by radioassay to be 62.8 μg/mL (test sytem Lawrence) and 60.6 µg/mL (test system Pikeville).
- The application solution was uniformly applied to the surface of the water (conc.water = 0.075 μg/mL). The final concentration of methanol was <0.1% in the test systems.
- Duplicate samples were analyzed 0, 1, 2, 4, 7, 14, 30, 60 and 100 days after treatment.
- The water was separated from the sediment by decantation and centrifugation and the sediment was extracted three times by shaking at ambient temperature and once by microwave-accelerated extraction at 70 °C using acetonitrile / water 4/1 (v/v).
- The amounts of test item and its degradation products in water and sediment extracts were determined by liquid scintillation counting (LSC) and HPLC/radiodetection. Test item and degradation products were identified by HPLC-MS(/MS) including accurate mass determination. - Compartment:
- other: water / sediment, material (mass) balance
- Remarks on result:
- other: The complete material balances (95.1 - 101.6%) found at all sampling intervals demonstrated that there was no significant loss of radioactivity from the test systems or during sample processing.
- % Degr.:
- 100
- Parameter:
- radiochem. meas.
- Sampling time:
- 60 d
- Remarks on result:
- other: < LOD
- Compartment:
- entire system
- DT50:
- >= 4.2 - <= 10.4 d
- Type:
- other: Single first order
- Temp.:
- 12 °C
- Remarks on result:
- other: recalculated half-life to 12°C with Arrhenius equation
- Compartment:
- water
- DT50:
- >= 3.6 - <= 9.8 d
- Type:
- other: Single first order
- Temp.:
- 12 °C
- Remarks on result:
- other: recalculated half-life to 12°C with Arrhenius equation
- Compartment:
- entire system
- DT50:
- >= 2 - <= 4.9 d
- Type:
- other: Single first order
- Temp.:
- 20 °C
- Remarks on result:
- other: 6.6 - 16.3 days DT90
- Compartment:
- water
- DT50:
- >= 1.7 - <= 4.6 d
- Type:
- other: Single first order
- Temp.:
- 20 °C
- Remarks on result:
- other: 5.8 - 15.2 days DT90
- Transformation products:
- yes
- No.:
- #1
- No.:
- #2
- No.:
- #3
- Details on transformation products:
- Three degradation products ≥ 10% were identified (see above).
- Details on results:
- TEST CONDITIONS
-The pH values in Lawrence samples ranged from 6.7 to 7.1 in water and from 6.6 to 6.9 in sediment. In Pikeville samples, the pH values ranged from 5.2 to 6.8 in water and from 5.1 to 6.8 in sediment.
- The oxygen content (dissolved oxygen) in waters ranged from 0.1 to 0.3 mg/L in Lawrence samples and from 0 to 0.5 mg/L in Pikeville samples.
- The redox potentials in waters and sediments remained at negative to low positive EH-values. In Lawrence samples, the EH-values ranged from -23 to +133 mV in water and from -4 to +139 mV in sediment. In Pikeville samples, the EH-values ranged from -203 to -17 mV in water and from -12 to +172 mV in sediment.
- The negative to low positive values for the redox potentials and the oxygen contents indicate anaerobic conditions over the duration of the laboratory study.
EXTRACTABLE RESIDUES
In water:
Extractable residues in Lawrence system decreased in the water from 95.0% at study start to a minimum of 37.7% AR at DAT-30 and then slightly increased to 41.0% at study end. In Pikeville system, the extractable residues in water decreased from start to end from 99.4 to 56.4%.
In sediment:
In the sediment, the extractable residues in Lawrence system increased from 2.8% at study start to a maximum of 45.6% after 14 days and then slightly decreased to 41.1% at study end. The sediment extractable residues in Pikeville system increased from 1.9% AR at study start to a maximum of 38.6% at day 60 and then slightly decreased to 34.9% at day 100.
Entire system:
The total extractable residues in the entire system (water and sediment) decreased in Lawrence system from 95.0% at start to 82.0% at day 30 and remained constant until the test end. In Pikeville system, the total extractable residues in the entire system decreased from start to end from 101.3 to 91.3%.
NON-EXTRACTABLE RESIDUES
Non-extractable residues increased from start to test end from < 0.1 to 14.0% in Lawrence system and from 0.1 to 12.4% in Pikeville system.
VOLATILIZATION
Formation of volatiles was insignificant as demonstrated by values of ≤ 0.2%. - Endpoint:
- biodegradation in water and sediment: simulation testing, other
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: GLP Guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 308 (Aerobic and Anaerobic Transformation in Aquatic Sediment Systems)
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 835.4300 (Aerobic Aquatic Metabolism)
- Qualifier:
- according to guideline
- Guideline:
- other: Commission Directive 95/36/EC amending Council Directive 91/414/EEC
- Qualifier:
- according to guideline
- Guideline:
- other: Regulation (EC) No 1107/2009 of the European Parliament and of the Council
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- Ministerium für Arbeit, Gesundheit und Soziales des Landes Nordrhein-Westfalen
- Radiolabelling:
- yes
- Oxygen conditions:
- aerobic
- Inoculum or test system:
- natural water / sediment
- Details on source and properties of surface water:
- WATER SAMPLES:
- The waters were freshly sampled prior to the start of the study at two sites (No pesticides used for previous 5 years):
1. Artificially damned pond: Hoenniger Weiher, Close to Wipperfürth , North Rhine-Westphalia, Germany
GPS Coordinates: N 51° 08.2’ E 007° 27.1’
2. Small, reclaimed gravel pit: Anglersee / Leverkusen / North Rhine- Westphalia / Germany
GPS Coordinates: N 51° 01.3’ E 007° 00.7’
PHYSICO-CHEMICAL CHARACTERIZATION:
- pH at time of collection:
1. Artificially pond: 7.7
2. Small, reclaimed gravel pit: 7.6
- Oxygen saturation:
1. Artificially pond: 95.5%
2. Small, reclaimed gravel pit: 100%
- Dissolved Organic Carbon:
1. Artificially pond: <2 mg/L at start of equilibration
2. Small, reclaimed gravel pit: <2 mg/L at start of equilibration
- Water Hardness:
1. Artificially pond: 0.6 mmol/L
2. Small, reclaimed gravel pit: 1.8 mmol/L - Details on source and properties of sediment:
- SEDIMENT SAMPLES:
- The sediments were freshly sampled prior to the start of the study at two sites (No pesticides used for previous 5 years):
1. Artificially pond: Hoenniger Weiher, Close to Wipperfürth , North Rhine-Westphalia, Germany
GPS Coordinates: N 51° 08.2’ E 007° 27.1’
2. Small, reclaimed gravel pit: Anglersee / Leverkusen / North Rhine- Westphalia / Germany
GPS Coordinates: N 51° 01.3’ E 007° 00.7’
- Sampling depth (cm): The upper sediment layer was collected (0-10 cm)
- Sediment preparation prior to use: Sieved to 2 mm mesh-size
- Storage length: 1-2 days until start of equilibration
PHYSICO-CHEMICAL CHARACTERIZATION:
- Textural classification:
1. Artificially pond:
Sand [50 μm – 2 mm] = 60%
Silt [2 μm – 50 μm] = 34%
Clay [< 2 μm] = 6%
2. Small, reclaimed gravel pit:
Sand [50 μm – 2 mm] = 83%
Silt [2 μm – 50 μm] = 11%
Clay [< 2 μm] = 6%
- pH at time of collection:
1. Artificially pond: 5.3
2. Small, reclaimed gravel pit: 7.1
- Organic Matter:
1. Artificially pond: 7.8% at start of equilibrium
2. Small, reclaimed gravel pit: 2.8% at start of equilibrium
- Organic Carbon:
1. Artificially pond: 4.5% at start of equilibrium
2. Small, reclaimed gravel pit: 1.6% at start of equilibrium
- Total Nitrogen:
1. Artificially pond: 3100 mg/kg
2. Small, reclaimed gravel pit: 1400 mg/kg
- Total Phosphorus:
1. Artificially pond: 650 mg/kg
2. Small, reclaimed gravel pit: 440 mg/kg
- Redox Potential:
1. Artificially pond: +224 mV
2. Small, reclaimed gravel pit: +361 mV
- Moisture:
1. Artificially pond: 142.1 g H2O / 100 g dry weight
2. Small, reclaimed gravel pit: 34.1 g H2O / 100 g dry weight - Duration of test (contact time):
- > 100 d
- Initial conc.:
- 75 µg/L
- Based on:
- act. ingr.
- Parameter followed for biodegradation estimation:
- radiochem. meas.
- Details on study design:
- EXPERIMENTAL DESIGN
The test systems consisted of cylindrical glass containers each containing a water-to-sediment volume ratio of 3:1, corresponding to 520 mL water (approx. 6 cm in height) and 175 mL wet sediment (approx. 2 cm in height), and equipped with traps for the collection of carbon dioxide and volatile organic compounds but permeable for oxygen.
- Oxygen conditions: Aerobic
- Light conditions: Dark
- Temperature: mean 20 ± 2 °C (mean: 20.0 °C, min: 19.8 °C, max. 20.4 °C)
- Stock solution:
[Phenyl-UL-14C]Triafamone was dissolved in 5.369 mL acetonitrile by sonication, resulting in a stock solution with a nominal concentration of 3.79 MBq/mL (1 mg/mL) and [Triazine-UL-14C]Triafamone was dissolved in 4.563 mL acetonitrile by sonication, resulting in a stock solution with a nominal concentration of 4.46 MBq/mL (1 mg/mL)
- The stock solution was stored frozen protected from light
- The test item was applied dropwise onto the water surface in 500 μl methanol / water 1/1 (v/v).
- Duplicate samples were analyzed 0, 1, 2, 4, 7, 14, 30, 60 and 100 days after treatment for Hoenniger Weiher systems and 0, 1, 2, 4, 7, 14, 30, 63 and 102 days after treatment for Anglersee test systems.
- At each sampling interval, the redox potentials and the pH values of the water and sediment as well as the oxygen content of the water were determ ned in the unprocessed samples after removal of the trap attachments.
- The water was separated from the sediment by decantation and centrifugation and the sediment was extracted three times by shaking at ambient temperature and once by microwave-accelerated extraction at 70 °C using acetonitrile / water 4/1 (v/v).
- The water of Anglersee samples was stabilized with 0.1 M TRIS buffer solution (pH 7) prior to HPLC/radiodetection analysis to prevent further hydrolytic degradation after sampling.
- The amounts of test item and its degradation products in water and sediment extracts were determined by liquid scintillation counting (LSC) and HPLC/radiodetection. The amounts of volatiles and nonextractable residues were determined by LSC and combustion/LSC, respectively. Test item and degradation products were identified by HPLC-MS(/MS) including accurate mass determination. - Compartment:
- other: water / sediment, material (mass) balance
- Remarks on result:
- other: The complete material balances found at all sampling intervals demonstrated that there was no significant loss of radioactivity from the test systems or during sample processing.
- % Degr.:
- 100
- Parameter:
- radiochem. meas.
- Sampling time:
- 30 d
- Remarks on result:
- other: < LOD
- Compartment:
- entire system
- DT50:
- >= 6.2 - <= 8.9 d
- Type:
- other: Single first order
- Temp.:
- 12 °C
- Remarks on result:
- other: recalculated half-life to 12°C with Arrhenius equation
- Compartment:
- water
- DT50:
- >= 5.3 - <= 7.2 d
- Type:
- other: Double first order in parallel
- Temp.:
- 12 °C
- Remarks on result:
- other: recalculated half-life to 12°C with Arrhenius equation
- Compartment:
- entire system
- DT50:
- >= 2.9 - <= 4.2 d
- Type:
- other: Single first order
- Temp.:
- 20 °C
- Remarks on result:
- other: 9.7-13.8 days DT90
- Compartment:
- water
- DT50:
- >= 2.5 - <= 3.4 d
- Type:
- other: Double first order in parallel
- Temp.:
- 20 °C
- Remarks on result:
- other: 9.3-11.5 days DT90
- Transformation products:
- yes
- No.:
- #1
- No.:
- #2
- No.:
- #3
- Details on transformation products:
- Three degradation products ≥ 10% were identified (see above). Small amounts of extractable and charaterisable by chromatography residues were observed with no one component exceeding 4.2% at any sampling interval.
- Volatile metabolites:
- yes
- Residues:
- yes
- Details on results:
- TEST CONDITIONS
- The pH values in waters and sediments remained stable except for the day 60 and day 100 samples of Hoenniger Weiher where a decrease of pH values was observed. In Hoenniger Weiher samples, the pH values ranged from 4.8 to 7.6 in water and from 5.8 to 6.8 in sediment. In Anglersee samples, the pH values ranged from 7.9 to 8.5 in water and from 7.2 to 7.4 in sediment.
- The oxygen content (dissolved oxygen) in waters ranged from 6.5 to 9.2 mg/L in Hoenniger Weiher samples and from 4.2 to 8.7 mg/L in Anglersee samples.
- The redox potentials in waters and sediments remained at highly positive EH-values. In Hoenniger Weiher samples, the EH-values ranged from 374 to 428 mV in water and from 115 to 390 mV in sediment. In Anglersee samples, the EH-values ranged from 341 to 424 mV in water and from 94 to
406 mV in sediment.
- The clearly positive values for the redox potentials and the oxygen contents indicate aerobic conditions over the duration of the laboratory study.
EXTRACTABLE RESIDUES
In water:
Extractable residues decreased in the water from study start (day 0) to study end (day 100 / say 102) from 98.9 to 34.9% AR in phenyl-label Hoenniger Weiher system, from 98.8 to 29.0% AR in triazine-label Hoenniger Weiher system, from 95.5 to 51.1% AR in phenyl-label Anglersee system and from 95.9 to 46.6% AR in triazine-label Anglersee system.
In sediment:
In the sediment, the extractable residues in phenyl- and triazine-label Hoenniger Weiher systems increased from 5.4 and 4.9% AR at DAT-0 to a maximum of 52.3 and 52.4% AR at day-60 and then decreased to 44.6 and 42.8% AR at day 100, respectively. The sediment extractable residues in phenyl- and triazine-label Anglersee systems increased from 4.9 and 4.5% AR at day 0 to a maximum of 39.0 and 37.9% AR at day 30 and then decreased to 34.5 and 34.9% AR at day 102, respectively.
Entire system:
The total extractable residues in the entire system (water and sediment) decreased from day 0 to day 100 / day 102 from 104.3 to 79.5% AR in phenyl-label Hoenniger Weiher system, from 103.7 to 71.8% AR in triazine-label Hoenniger Weiher system, from 100.4 to 85.6% AR in phenyl-label Anglersee system and from 100.4 to 81.5% AR in triazine-label Anglersee system.
NON-EXTRACTABLE RESIDUES
Non-extractable residues (NER) increased from day 0 to day 100 / day 102 from 0.3 to 21.2% AR in phenyl-label Hoenniger Weiher system, from 0.3 to 20.5% AR in triazine-label Hoenniger Weiher system, from 0.2 to 11.7% AR in phenyl-label Anglersee system and from 0.2 to 10.7% AR in triazine-label Anglersee system.
VOLATILIZATION
The maximum amount of carbon dioxide at day 100 / day 102 was 3.0 and 9.1% AR in phenyl- and triazine-label Hoenniger Weiher systems, respectively, and 3.0 and 6.2% AR in phenyl- and triazinelabel Anglersee systems, respectively. Formation of other volatile organic compounds was insignificant as demonstrated by values of ≤ 0.1% AR.
Referenceopen allclose all
The route and rate of degradation of the test item was studied in two water / sediment systems under anaerobic conditions in the dark in the laboratory for 100 days at 19.9 °C. A study application rate of nominal 75 μg per liter was applied. The results show rapid degradation of triafamone in water / sediment systems under anaerobic conditions. The DT50 value in water ranges (recalculated to 12°C) from 3.6 to 9.8 days and in the entire system from 4.2 to 10.4 days. Three degradation products ≥ 10% were detected in the entire system and identified as AE 1887196-dihydro, AE 1887196-dihydro-O-desmethyl and AE 1887196-oxazolidine-dione. The main degradation product AE 1887196-dihydro was also degraded under anaerobic condtions.
The route and rate of degradation of the test item was studied in two water / sediment systems under aerobic conditions in the dark in the laboratory for a maximum of 102 days at 20.0 °C. A study application rate of nominal 75 μg per liter was applied. The results show rapid degradation of the test item in water / sediment systems under aerobic conditions. The DT50 value in water ranges (recalculated to 12°C) from 5.3 to 7.2 days and in the entire system from 6.2 to 9.0 days. Three degradation products ≥ 10% AR were detected in the entire system and identified as AE 1887196-dihydro, AE 1887196-dihydro-O-desmethyl and AE 1887196-oxazolidine-dione. Formation of carbon dioxide from both phenyl and triazine rings demonstrates mineralization of the test item.
Description of key information
DT50 = 3.6 – 10.4 days (OECD 308, aerob and anaerob conditions, recalculated to 12 °C)
In water / sediment systems the substance will be degraded within a short time period.
Key value for chemical safety assessment
Additional information
The route and rate of degradation of triafamone (CAS No. 874195-61-6) was studied under aerobic conditions and anaerobic conditions in two water / sediment systems. The studies conducted according to OECD guideline 308 and GLP in the dark at approximately 20.0 °C. A study application rate of nominal 75 μg per liter was applied. The results show that triafamone degrades fast in water / sediment systems under aerobic and anaerobic conditions. All results were recalculated to 12 °C with Arrhenius equation. Under aerobic conditions the DT50 value in water ranges from 5.3 - 7.2 days and in the entire system from 6.2 to 8.9 days. Under anaerobic conditions the DT50 value in water ranges from 3.6 to 9.8 days and in the entire system from 4.2 to 10.4 days. Aerobic and anaerobic degradation resulted in equal degradation products, which have been identified as AE 1887196-dihydro, AE 1887196-dihydro-O-desmethyl and AE 1887196-oxazolidine-dione.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.