Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 210-047-0 | CAS number: 603-52-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Endpoint summary
Administrative data
Description of key information
Skin irritation. Key study: OECD Guideline 439 and Test method B.46. GLP study. The mean corrected percent viability of the treated tissues was 105.5%, versus 1.0% in the positive control (5% Sodium Dodecyl Sulfate). No other effects were observed. The test item is not irritant to the skin.
Eye irritation. Key study: OECD Guideline 438 and Test method B.48. GLP study. The combination of the tree endpoints for the test item was 3x1. Therefore, the test item is classified as "No Category".
Key value for chemical safety assessment
Skin irritation / corrosion
Link to relevant study records
- Endpoint:
- skin irritation: in vitro / ex vivo
- Remarks:
- Reconstructed Human Epidermis Test Method
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- November 3, 2016 - November 24, 2016
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Specific details on test material used for the study:
- STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: room temperature - Test system:
- human skin model
- Remarks:
- SkinEthic RHE® model
- Source species:
- human
- Cell type:
- non-transformed keratinocytes
- Cell source:
- foreskin from a single donor
- Source strain:
- not specified
- Justification for test system used:
- The SkinEthic™ RHE model has been validated for irritation testing (Validation study based on the original ECVAM Performance Standards (21) in 2008) and its use is recommended by the relevant OECD guideline for irritation testing (OECD No. 439); therefore, it was considered to be suitable for this study.
- Vehicle:
- unchanged (no vehicle)
- Remarks:
- The test item was applied as supplied
- Details on test system:
- RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: SkinEthic RHE® model
- Tissue batch number(s): 16-RHE-122
- Delivery date: November 22, 2016
- Date of initiation of testing: November 22, 2016
- Expiration date: November 28, 2016
TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: room temperature
- Temperature of post-treatment incubation: 37ºC
REMOVAL OF TEST MATERIAL AND CONTROLS
-Volume and number of washing steps: 25 x 1 mL of DPBS
- Observable damage in the tissue due to washing: no
- Modifications to validated SOP: no
MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE
- MTT concentration: 300 μL of a MTT solution at 1.0 mg/mL
- Incubation time: 3h
- Spectrophotometer: ELx800 absorbance microplate reader (BioTek)
- Wavelength: 570 nm
- Linear OD range of spectrophotometer: The linearity range of optical density measured is validated for an optical density between 0 and 2.0.
FUNCTIONAL MODEL CONDITIONS WITH REFERENCE TO HISTORICAL DATA
- Viability: 1.2 (CV = 1.3%) specification OD > 0.7
- Barrier function: 5.2 h SPECIFICATION 4.0 h < ET50 < 10 h
- Morphology: 6 Cell layers, absence of significant histological abnormalities, well differentiated epidermis, specification > 4
- Contamination: no
NUMBER OF REPLICATE TISSUES: 3
CONTROL TISSUES USED IN CASE OF MTT DIRECT INTERFERENCE: no interference
NUMBER OF INDEPENDENT TEST SEQUENCES / EXPERIMENTS TO DERIVE FINAL PREDICTION: 1
PREDICTION MODEL / DECISION CRITERIA (choose relevant statement)
- The test substance is considered to be irritant to skin if the viability after 42 minutes exposure is less than or equal to 50%.
- The test substance is considered to be non-irritant to skin if the viability after 42 minutes exposure is greater than 50% - Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- Amount/concentration applied:
- TEST MATERIAL
- Amount applied: 16 mg of the test item on 0.50 cm2 human skin model
NEGATIVE CONTROL
- Amount applied: 16 μL
POSITIVE CONTROL
- Amount applied: 16 μL
- Concentration: 5% SDS - Duration of treatment / exposure:
- 42 minutes
- Duration of post-treatment incubation (if applicable):
- 41 hours and 15 minutes
- Number of replicates:
- 3
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- mean
- Value:
- ca. 105.5
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks:
- 1% viability
- Remarks on result:
- no indication of irritation
- Other effects / acceptance of results:
- - OTHER EFFECTS:
- Visible damage on test system: no.
- Direct-MTT reduction: A yellow solution was observed after 3 hours of incubation between 36.4ºC and 37.8ºC, 5% CO2. Therefore, there is no direct interaction between the test item and MTT.
- Colour interference with MTT:
In water: A colorless solution was obtained after 3 hours of incubation between 36.4ºC and 37.8ºC, 5% CO2.
In isopropanol: A colorless solution was obtained after 2 hours of incubation at room temperature.
Therefore, the test item will not interfere with the MTT assay and there is no need to add nonspecific coloration controls to the study.
DEMONSTRATION OF TECHNICAL PROFICIENCY:yes, a full demonstration of proficiency was performed for the EpiSkin-SM model, plus a reduced validation with the SkinEthic RHE model. Adequate results were obtained for the evaluated chemicals.Summary of proficiency chemicals testing according to OECD 439 criteria included in the report.
ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: yes, the standard deviation of the viability of negative control epidermises is 21.3%, instead of ≤ 18% as initially scheduled. This is due to a mean OD value of the replicate No.3 treated with the negative control, which is slightly above the maximal OD value of 1.5. This higher value obtained in the negative control group could lead to an over-classification of the test item. Considering the results obtained (the cell viability of the three treated epidermises is superior to 100% with a standard deviation of 3.7%), this deviation is considered as without impact on the conclusion of the study (the test item is not irritant for the skin).
- Acceptance criteria met for positive control: yes.
- Acceptance criteria met for variability between replicate measurements: yes. - Interpretation of results:
- GHS criteria not met
- Conclusions:
- The mean corrected percent viability of the treated tissues was 105.5%, versus 1.0% in the positive control (5% Sodium Dodecyl Sulfate). No other effects were observed. The test item is not irritant to the skin.
- Executive summary:
An in vitro skin irritation test method was performed according OECD Guideline 439 and Test method B.46, with GLP, to evaluate the possible irritating effects of the test item after topical application on in vitro human reconstructed epidermis (SkinEthic RHE® model). The test item was applied at the dose of 16 mg, to 3 living Reconstructed Human epidermis during 42 minutes, followed by a rinse with 25 mL of DPBS and a 41 hours and 15 minutes post-incubation period at 37ºC, 5% CO2. Cell viability was then measured by enzymatic conversion of the vital dye MTT into a blue formazan salt that was quantitatively measured after extraction from tissues. Negative and positive controls were run in parallel. The mean corrected percent viability of the treated tissues was 105.5%, versus 1.0% in the positive control (5% Sodium Dodecyl Sulfate). No other effects were observed. The test item has to be considered as Non-irritant to skin, corresponding to the UN GHS No category.
Reference
The results were expressed as a viability percentage compared with the negative control.
viability % = (OD test item / OD negative control) x100
For each tissue, OD values and calculated percentage cell viability data for the test item, positive and negative controls, should be reported in tabular form, including data from replicate repeat experiments as appropriate, mean and individual values.
Table 1. Individual and average values of OD after 42 minutes exposure
|
Skin |
OD |
Mean OD / disc (#) |
Mean OD / product |
Viability % |
Mean viability % |
SD |
Conclusion |
Negative control |
1 |
0.943 |
1.019 |
1.309 |
77.8 |
100.0 |
21.3 |
|
1.039 |
||||||||
1.075 |
||||||||
2 |
1.308 |
1.334 |
101.9 |
|||||
1.352 |
||||||||
1.343 |
||||||||
3 |
1.512 |
1.575 |
120.3 |
|||||
1.557 |
||||||||
1.657 |
||||||||
Positive control |
4 |
0.012 |
0.013 |
0.013 |
1.0 |
1.0 |
0.1 |
Irritant |
0.013 |
||||||||
0.013 |
||||||||
5 |
0.011 |
0.011 |
0.8 |
|||||
0.012 |
||||||||
0.011 |
||||||||
6 |
0.013 |
0.014 |
1.1 |
|||||
0.014 |
||||||||
0.014 |
||||||||
Test item PH-16/0551 |
18 |
1.369 |
1.426 |
1.381 |
108.7 |
105.5 |
3.7 |
Non irritant |
1.438 |
||||||||
1.471 |
||||||||
19 |
1.392 |
1.389 |
106.1 |
|||||
1.392 |
||||||||
1.383 |
||||||||
20 |
1.349 |
1.329 |
101.5 |
|||||
1.353 |
||||||||
1.285 |
# mean of 3 values (triplicate of the same extract)
OD: optical density
The optical density was measured after a 1:2 dilution of the formazan extracts in isopropanol.
Acceptability criteria: SD≤18%.
The acceptance criteria were met.
Notes:
- If the viability obtained for the test item is greater than 50%, the test item has to be considered as non irritant.
- If the viability obtained for the test item is less than or equal to 50%, the test item has to be considered as irritant.
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Eye irritation
Link to relevant study records
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- November 16, 2016
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 438 (Isolated Chicken Eye Test Method for Identifying i) Chemicals Inducing Serious Eye Damage and ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU method B.48 (Isolated chicken eye test method for identifying occular corrosives and severe irritants)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Specific details on test material used for the study:
- STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: room temperature - Species:
- chicken
- Strain:
- not specified
- Details on test animals or tissues and environmental conditions:
- SOURCE OF COLLECTED EYES
- Source: Slaughterhouse (Etablissement Brun, 33820 Etauliers, France)
- Characteristics of donor animals: spring chickens traditionally processed by a poultry slaughterhouse (approximately 7 weeks old, 1.5-2.5 kg).
- Storage, temperature and transport conditions of ocular tissue: Eyes were dissected in the laboratory. The heads have been collected and transported intact from slaughterhouse at ambient temperature in plastic boxes humidified with towels moistened with physiological saline. The eyes were enucleated at laboratory on 16 November 2016 at 9:50 am.
- Time interval prior to initiating testing: Heads were collected on 16 November 2016 at 8:15 am. The eyes were enucleated at laboratory on 16 November 2016 at 9:50 am. The eyes were enucleated at laboratory on 16 November 2016 at 9:50 am. The examined and approved eyes were incubated between 45 and 58 minutes to equilibrate them to the test system prior to dosing.
- indication of any existing defects or lesions in ocular tissue samples: no
- Indication of any antibiotics used: no - Vehicle:
- unchanged (no vehicle)
- Controls:
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- TEST MATERIAL
- Amount applied: 30 mg - Duration of treatment / exposure:
- 10 seconds
- Duration of post- treatment incubation (in vitro):
- 4 hours
- Number of animals or in vitro replicates:
- 3
- Details on study design:
- SELECTION AND PREPARATION OF ISOLATED EYES
Dissection of the eyes: The eyelids were carefully excised, taking care not to damage the cornea. Then, the eye was further dissected from the skull, taking care not to damage the cornea. The eyeball was pulled from the orbit by holding the nictitating membrane firmly with surgical forceps, and the eye muscles were cut with a bent, blunt-tipped scissor. When the eye is removed from the orbit, a visible portion of the optic nerve should be left attached. One removed from the orbit, the eye was placed on an absorbent pad and the nictitating membrane and other connective tissue were cut away.
Selection of the eyes: The enucleated eye was mounted in a stainless steel clamp with the cornea positioned vertically. The clamp was then transferred to a chamber of the superfusion apparatus. The clamps were positioned in the superfusion apparatus such that the entire cornea was supplied with the physiological saline drip (in the range 0.1 to 0.15 mL/min). The chambers of the superfusion apparatus was temperature controlled between 32.3ºC and 32.6ºC.
After being placed in the superfusion apparatus, the eyes were examined with a slit-lamp microscope to ensure that they have not been damaged during the dissection procedure using sodium fluorescein. Corneal thickness was also measured at this time at the corneal apex using the deph measuring device on the slit-lamp microscope. Eyes with; (i), a fluorescein retention score of > 0.5; (ii) corneal opacity > 0.5; or, (iii), any additional signs of damage were replaced. For eyes that are not rejected based on any of these criteria, individual eyes with a corneal thickness deviating more than 10% from the mean value for all eyes are to be rejected.
EQUILIBRATION AND BASELINE RECORDINGS
The examined and approved eyes were incubated between 45 and 58 minutes to equilibrate them to the test system prior to dosing. Following the equilibration period, a zero reference measurement was recorded for corneal thickness and opacity to serve as a baseline (i.e., time = 0). The fluorescein score determined at dissection was used as the baseline measurement for that endpoint.
NUMBER OF REPLICATES: 3
NEGATIVE CONTROL USED: 30 μL of Phisiological saline - Dutscher, Batch No. 3012316 (1 replicate)
POSITIVE CONTROL USED: 3. 30 mg of Sodium hydroxide - Sigma, Batch No. MKBP7805V (3 replicates)
APPLICATION DOSE AND EXPOSURE TIME: 30 mg for 10 seconds
OBSERVATION PERIOD: Treated corneas were evaluated pretreatment and starting at 30, 75, 120, 180 and 240 minutes (+/-5 minutes) after the post-treatment rinse.
REMOVAL OF TEST SUBSTANCE
- Volume and washing procedure after exposure period: Test item rinsed from the eye with 20 mL of physiological saline at ambient temperature.
- Indicate any deviation from test procedure in the Guideline: no deviations
METHODS FOR MEASURED ENDPOINTS:
- Corneal opacity: the corneal opacity was calculated using the area of the cornea that was most densely opacied for scoring. The mean corneal opacity value for all test eyes was calculated for all observation time points. Based on the highest mean score for corneal opacity, as observed at any time point, and overall category score was then given for each test or control item.
- Damage to epithelium based on fluorescein retention: the mean fluorescein retention value for all test eyes was calculated for the 30-minute observation time point only, which was used for the overall category score given for each test or control item.
- Swelling: measured with optical pachymeter on a slit-lamp microscope HaagStreit BP900 slit-lamp microscope with deph-measuring device no. I; the slit-width was set at 9 1/2 equlling 0.095 mm: corneal swelling was determined from corneal thickness measurements made with an optical pachymeter on a slit-lamp microscope. The mean percentage of corneal swelling for all test eyes was calculated for all observation time points. Based on the highest mean score for corneal swelling, as observed at any time point, and overall category score was the given for each test item.
- Macroscopic morphological damage to the surface: morphological effects include "pitting" of corneal epithelial cells, "loosening" of epithelium, "roughening" of the corneal surface and "sticking" of the test item to the cornea. These findings can vary in severity and may occur simultaneously. The classification of these findings is subjective according to the interpretation of the investigator.
SCORING SYSTEM:
- Mean corneal swelling (%): calculated according to the following formula and expressed as a percentage
[(Corneal thickness at time 1 - Corneal thickness at time 0) / Corneal thickness at time 0] x 100
- Mean maximum opacity score:
0 = No opacity
0.5 = Very faint opacity
1 = Scattered or diffuse areas; details of the iris clearly visible
2 = Easily discernible translucent area; details of the iris are slightly obscured
3 = Severe corneal opacity; no specific details of the iris are visible; size of the pupil is barely discernible
4 = Complete corneal opacity; iris invisible
- Mean fluorescein retention score at 30 minutes post-treatment:
0 = No fluorescein retention
0.5 = Very minor single cell staining
1 = Single cell staining scattered throughout the treated area of the cornea
2 = Focal or confluent dense single cell staining
3 = Confluent large areas of the cornea retaining fluorescein
DECISION CRITERIA: the decision criteria as indicated in the TG was used. Results from corneal opacity, swelling and fluorescein retention were evaluated separately to generate an ICE class for each endpoint. The ICE classes for each endpoint were then combined to generate an Irritancy Classification for the test item. Once each endpoint was evaluated, ICE classes were assigned based on a predetermined range.
The test will considered acceptable if the concurrent negative control and the concurrent positive control are identified as GHS Non-classified and GHS Category 1, respectively - Irritation parameter:
- cornea opacity score
- Run / experiment:
- mean
- Value:
- ca. 0
- Vehicle controls validity:
- not valid
- Negative controls validity:
- valid
- Remarks:
- ICE class I
- Positive controls validity:
- valid
- Remarks:
- ICE class IV
- Remarks on result:
- no indication of irritation
- Remarks:
- ICE class I
- Irritation parameter:
- fluorescein retention score
- Run / experiment:
- mean
- Value:
- ca. 0.5
- Vehicle controls validity:
- not valid
- Negative controls validity:
- valid
- Remarks:
- ICE class II
- Positive controls validity:
- valid
- Remarks:
- ICE class IV
- Remarks on result:
- no indication of irritation
- Remarks:
- ICE class I
- Irritation parameter:
- percent corneal swelling
- Run / experiment:
- mean
- Value:
- ca. 1
- Vehicle controls validity:
- not valid
- Negative controls validity:
- valid
- Remarks:
- ICE class I
- Positive controls validity:
- valid
- Remarks:
- ICE class IV
- Remarks on result:
- no indication of irritation
- Remarks:
- ICE class I
- Other effects / acceptance of results:
- OTHER EFFECTS:
- Visible damage on test system: no. No morphological effects were noted, wathever the examination time.
DEMONSTRATION OF TECHNICAL PROFICIENCY: yes, 12 of the 13 chemicals tested obtained the same category as OECD 438. There was a borderline chemical (DMSO) over-classified ("No prediction can be made" vs. "No Category") in three separated tests. It should be tested with other adequately validated in vitro test.
ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: yes, the combination of the three endpoints for the negative contro, physiological saline, was 2 x I, 1 x II. Therefore, the negative control is classified as "No Category", as expected.
- Acceptance criteria met for positive control: yes, the combination of the three endpoints for the positive control, Sodium hydroxide, was 3 x IV. Therefore, the positive control is classified as "Corrosive/Severe Irritant", as expected. - Interpretation of results:
- GHS criteria not met
- Remarks:
- The combination of the three endpoint (corneal swelling, opacity and fluorescein retention) evaluated for the test item was 3 x I. The test item is classified as "No Category"
- Conclusions:
- The combination of the tree endpoints for the test item was 3x1. Therefore, the test item is classified as "No Category".
- Executive summary:
An Isolated Chicken Eye Test Method for Identifying (i) Chemicals Inducing Serious Eye Damage and (ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage was performed according OECD guideline 438 and test method B.48, to evaluate the possible ocular corrosive or severe irritating effects of the test item after administration on enucleated chicken eyes. The test item was applied, as supplied, at the dose of 30 mg, to 3 enucleated chicken eyes, during 10 seconds. Then the eyes were rinsed twice with 10 mL of physiological saline. Three eyes were treated in the same manner with a positive control and one eye with a negative control. Damages by the test item were assessed by determination of corneal swelling, opacity, and fluorescein retention at 30, 75, 120, 180 and 240 minutes post-dose. The ocular reactions observed in eyes treated with the test item were: maximal mean score of corneal opacity: 0.0, corresponding to ICE class I; mean score of fluorescein retention: 0.5, corresponding to ICE class I; maximal mean corneal swelling: 1%, corresponding to ICE class I. The combination of the three endpoints for the test item was 3 x I. Positive and negative control were classified as expected. In accordance with the Regulation (EC) No. 1272/2008, the results obtained under these experimental conditions enable to conclude that the test item does not require classification for eye irritation and serious eye damage as defined by UN GHS (No category).
Reference
Results: Negative Control (Physiological Saline)
Endpoint measured |
Eye No. |
Time (min) |
|||||
0 |
30 |
75 |
120 |
180 |
240 |
||
Corneal opacity |
13 |
0.0 |
0.0 |
0.0 |
0.0 |
0.0 |
0.0 |
ICE class |
I |
||||||
Fluorescein retention |
13 |
0.5 |
1 |
- |
- |
- |
- |
ICE class |
II |
||||||
Corneal thickness |
13 |
0.58 |
0.58 |
0.58 |
0.58 |
0.58 |
0.58 |
Corneal swelling (%) |
13 |
- |
0 |
0 |
0 |
0 |
0 |
ICE class |
I |
||||||
Combination of the 3 Endpoints |
2 x I, 1 x II |
||||||
CLASSIFICATION |
No Category |
Note:
No morphological effects were noted, whatever the examination time.
Results: Positive control (Sodium hydroxide)
Endpoint measured |
Eye No. |
Time (min) |
|||||
0 |
30 |
75 |
120 |
180 |
240 |
||
Corneal opacity |
1 |
0 |
4 |
4 |
4 |
4 |
4 |
2 |
0 |
4 |
4 |
4 |
4 |
4 |
|
3 |
0 |
4 |
4 |
4 |
4 |
4 |
|
Mean |
0.0 |
4.0 |
4.0 |
4.0 |
4.0 |
4.0 |
|
ICE class |
IV |
||||||
Fluorescein retention |
1 |
0.5 |
3 |
- |
- |
- |
- |
2 |
0.5 |
3 |
- |
- |
- |
- |
|
3 |
0.5 |
3 |
- |
- |
- |
- |
|
Mean |
0.5 |
3.0 |
- |
- |
- |
- |
|
ICE class |
IV |
||||||
Corneal thickness |
1 |
0.58 |
- |
- |
- |
- |
- |
2 |
0.58 |
- |
- |
- |
- |
- |
|
3 |
0.58 |
- |
- |
- |
- |
- |
|
Corneal swelling (%) |
1 |
- |
(-) |
(-) |
(-) |
(-) |
(-) |
2 |
- |
(-) |
(-) |
(-) |
(-) |
(-) |
|
3 |
- |
(-) |
(-) |
(-) |
(-) |
(-) |
|
Mean |
- |
- |
- |
- |
- |
- |
|
ICE class |
IV |
||||||
Combination of the 3 Endpoints |
3 x IV |
||||||
CLASSIFICATION |
Category I |
Note:
(-): evaluation of corneal swelling not possible (Corneal opacity = 4 at each examination time, leading to a marked refraction of the light preventing from the evaluation of the corneal swelling with the biomicroscope)
Severe loosening of the corneal epithelium noted from 30 minutes post dose in eyes nº2 and nº3
Results: Test item
Endpoint measured |
Eye No. |
Time (min) |
|||||
0 |
30 |
75 |
120 |
180 |
240 |
||
Corneal opacity |
4 |
0 |
0 |
0 |
0 |
0 |
0 |
5 |
0 |
0 |
0 |
0 |
0 |
0 |
|
6 |
0 |
0 |
0 |
0 |
0 |
0 |
|
Mean |
0.0 |
0.0 |
0.0 |
0.0 |
0.0 |
0.0 |
|
ICE class |
I |
||||||
Fluorescein retention |
4 |
0.5 |
0.5 |
- |
- |
- |
- |
5 |
0.5 |
0.5 |
- |
- |
- |
- |
|
6 |
0.5 |
0.5 |
- |
- |
- |
- |
|
Mean |
0.5 |
0.5 |
- |
- |
- |
- |
|
ICE class |
I |
||||||
Corneal thickness |
4 |
0.59 |
0.60 |
0.61 |
0.61 |
0.61 |
0.61 |
5 |
0.59 |
0.59 |
0.59 |
0.59 |
0.59 |
0.59 |
|
6 |
0.58 |
0.58 |
0.58 |
0.58 |
0.58 |
0.58 |
|
Corneal swelling (%) |
4 |
- |
2 |
3 |
3 |
3 |
3 |
5 |
- |
0 |
0 |
0 |
0 |
0 |
|
6 |
- |
0 |
0 |
0 |
0 |
0 |
|
Mean |
- |
1 |
1 |
1 |
1 |
1 |
|
ICE class |
I |
||||||
Combination of the 3 Endpoints |
3 x I |
||||||
CLASSIFICATION |
No Category |
Note:
No morphological effects were noted, whatever the examination time.
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Respiratory irritation
Endpoint conclusion
- Endpoint conclusion:
- no study available
Additional information
Skin irritation
Key study: An in vitro skin irritation test method was performed according OECD Guideline 439 and Test method B.46, with GLP, to evaluate the possible irritating effects of the test item after topical application on in vitro human reconstructed epidermis (SkinEthic RHE® model). The test item was applied at the dose of 16 mg, to 3 living Reconstructed Human epidermis during 42 minutes, followed by a rinse with 25 mL of DPBS and a 41 hours and 15 minutes post-incubation period at 37ºC, 5% CO2. Cell viability was then measured by enzymatic conversion of the vital dye MTT into a blue formazan salt that was quantitatively measured after extraction from tissues. The mean corrected percent viability of the treated tissues was 105.5%, versus 1.0% in the positive control (5% Sodium Dodecyl Sulfate). No other effects were observed. The test item has to be considered as Non-irritant to skin, corresponding to UN GHS No Category.
Eye irritation
Key study: An Isolated Chicken Eye Test Method for Identifying (i) Chemicals Inducing Serious Eye Damage and (ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage was performed according OECD guideline 438 and test method B.48, to evaluate the possible ocular corrosive or severe irritating effects of the test item after administration on enucleated chicken eyes. The test item was applied, as supplied, at the dose of 30 mg, to 3 enucleated chicken eyes, during 10 seconds. Then the eyes were rinsed twice with 10 mL of physiological saline. Three eyes were treated in the same manner with a positive control and one eye with a negative control. Damages by the test item were assessed by determination of corneal swelling, opacity, and fluorescein retention at 30, 75, 120, 180 and 240 minutes post-dose. The ocular reactions observed in eyes treated with the test item were: maximal mean score of corneal opacity: 0.0, corresponding to ICE class I; mean score of fluorescein retention: 0.5, corresponding to ICE class I; maximal mean corneal swelling: 1%, corresponding to ICE class I. The combination of the three endpoints for the test item was 3 x I. Positive and negative control were classified as expected. In accordance with the Regulation (EC) No. 1272/2008, the results obtained under these experimental conditions enable to conclude that the test item does not require classification for eye irritation and serious eye damage as defined by UN GHS (No category).
Justification for classification or non-classification
Based on the available information, the test item is not to classified as skin irritating, neither as eye irritating according to CLP regulation EC No. 1272/2008.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.