Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Toxicity to aquatic algae and cyanobacteria
Administrative data
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2nd-5th June, 2020
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 021
- Report date:
- 2021
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 201 (Freshwater Alga and Cyanobacteria, Growth Inhibition Test)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Reaction products of 2,2'-(1,3-phenylenebis(oxy))diethanol with 2-(phenoxymethyl)oxirane and 2-isocyanatoethyl methacrylate
- Cas Number:
- 1431303-59-1
- Molecular formula:
- Not assigned for UVCB substance.
- IUPAC Name:
- Reaction products of 2,2'-(1,3-phenylenebis(oxy))diethanol with 2-(phenoxymethyl)oxirane and 2-isocyanatoethyl methacrylate
Constituent 1
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source and lot/batch number of test material: 3M, 6252020
- Expiration date of the lot/batch: September 2021
- Purity test date: 21st October 2019
- Purity: 100% (MTDID 58376), 14.22% ER-1GP IEM, 32.71% ER-2GP IEM, 29.91% ER-3GP IEM, 15.59% ER-4GP IEM
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: Room temperature in a dark, ventilated cabinet in the original container.
- Stability under storage conditions: Stable
- Stability under test conditions: Stable
Sampling and analysis
- Analytical monitoring:
- yes
- Details on sampling:
- - Concentrations: 0 (blank control) and 100 mg/L
- Sampling method: Water samples were taken from the approximate midpoint of each test concentration vessel before initial exposure, at 24 hours, and at the termination of the experiment (72 hour). Samples for the initial time point were taken from the remaining WAF after division into replicates. At 24 hours and 72 hours, replicate samples from each respective concentration were composited before aliquotting. Aliquots (10 mL) were taken from the composited exposure solutions and directly transferred to disposable glass vials containing 10 mL acetonitrile (to a final composition of 50/50 acetonitrile/AAP medium, (v/v). Samples were then diluted into the calibration standard range with 50/50 acetonitrile/AAP medium (v/v) prior to analysis. Three quality control samples, prepared in diluent water at test substance concentrations similar to the treatment level range, were also run during each sampling interval and analyzed with the study samples. In addition, uninnoculated flasks containing WAF were sampled at 24 and 72 hours to assess the impact of algal biomass on test substance concentrations.
- Sample storage conditions before analysis: Analysis was run immediately after sampling.
Test solutions
- Vehicle:
- no
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION (especially for difficult test substances)
- Method: The test substance was melted in the original container in a water bath (70 °C) for 45 minutes. The primary stock solution (100 mg/L) was prepared as a water-accomodated fraction by adding the aliquot of test substance directly onto a glass slide and then suspending the slide within the preparation vessel containing AAP medium. The solution was mixed overnight with a magnetic stir plate and Teflon-coated stir bar, and left to settle for 10-minutes. The solution was clear and colorless with no undissolved material except what was on the glass slide and a globule on the stir bar. The WAF was siphoned from the mixing vessel, avoiding the surface and bottom of the vessel and stir bar. The WAF was clear and colorless with no visible undissolved material. The 100% WAF solutions was used as the exposure solution.
- Controls: Test medium maintained under the same conditions but without test substance
- Evidence of undissolved material (e.g. precipitate, surface film, etc.): The primary stock solution was clear and colorless with visible undissolved material on the glass slide and stir bar. After siphoning, all exposure solutions were clear and colorless with no visible undissolved test substance.
Test organisms
- Test organisms (species):
- Raphidocelis subcapitata (previous names: Pseudokirchneriella subcapitata, Selenastrum capricornutum)
- Details on test organisms:
- TEST ORGANISM
- Source (laboratory, culture collection): UTEX The Culture Collection of Algae at the University of Texas, Austin, Texas, strain 1648
- Age of inoculum (at test initiation): Four days since previous transfer
- Method of cultivation: Maintained in stock culture at Smithers. Growth medium: Algal Assay Procedure (AAP) medium, prepared with sterile deionized source water. pH 7.5, continuous illumination of 61-70 uE/m²/S, 23 °C. Agitation at a continuous rate of 100 rpm on orbital shaker.
Study design
- Test type:
- static
- Water media type:
- freshwater
- Limit test:
- yes
- Total exposure duration:
- 72 h
Test conditions
- Test temperature:
- 22-23 °C
- pH:
- 7.1-7.8
- Conductivity:
- 87-110 uS/cm
- Nominal and measured concentrations:
- Nominal: blank control and 100 mg/L
Measured: see Table 1 - Details on test conditions:
- TEST SYSTEM
- Test vessel: 250-mL glass flasks covered with stainless steel caps
- Type: open / closed: Closed (gas exchange permitted)
- Material, size, headspace, fill volume: Fill volume was 100 mL
- Aeration: 100 RPM agitation on orbital shaker
- Initial cells density: 10,000 cells/mL
- Control end cells density: 779,000 cells/mL in blank
- No. of vessels per concentration (replicates): 6
- No. of vessels per control (replicates): 6
GROWTH MEDIUM
- Standard medium used: No. AAP medium prepared with sterile, carbon filtered deionized water source.
- Detailed composition if non-standard medium was used: 25.5 mg/L NaNO3, 12.16 mg/L MgCl2. 6H2O, 4.41 mg/L CaCl2.H2O, 14.7 mg/L MgSO4.7H2O, 1.368 mg/L K2HPO4.3H2O, 15.0 mg/L NaHCO3, 185 ug/L H3BO3, 1.88 ug/L Na2SeO4, 415.4 ug/L MnCl2.4H2O, 3.270 ug/L ZnCl2, 1.43 ug/L CoCl2.6H2O, 0.012 ug/L CuCl2.2H2O, 7.26 ug/LNa MoO4.2H2O, 160 ug/L FeCl3.6H2O, 300 ug/L Na2EDTA.2H2O
- Culture medium different from test medium: no
OTHER TEST CONDITIONS
- Sterile test conditions: Yes
- Adjustment of pH: No
- Photoperiod: Continuous illumination
- Light intensity and quality: Premira VitaLux fluorescent bulbs. Light intensity ranged from 5700-6600 lux at test initiation, PAR throughout experiment ranged 62-78 uE/m^2/S
EFFECT PARAMETERS MEASURED :
- Determination of cell concentrations: Using a Beckmen Coulter Multisizer 4e Particle Analyzer. Duplicate counts of duplicate samples were done on each replicate every 24 hours. The average of the four counts was reported. Observations on health of algal cells were made of alternating replicates of control or treatments by microscopy in a hemacytometer.
TEST CONCENTRATIONS
- Range finding study: Yes
- Test concentrations: control, 1.0, 10.0, 100 mg/L
- Results used to determine the conditions for the definitive study: Yes - Reference substance (positive control):
- yes
- Remarks:
- zinc chloride (ZnCl2)
Results and discussion
Effect concentrationsopen allclose all
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- > 100 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC10
- Effect conc.:
- > 100 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Details on results:
- - Exponential growth in the control: Yes
- Observation of abnormalities: During the exposure period all control and exposed cells were healthy and normal in appearance.
- Adherence to test vessels: None reported
- Effect concentrations exceeding solubility of substance in test medium: at each observation interval, no difference from initial time with respect to precipitation and material adhered to sides of the flasks. Test substance concentrations were not stable over the exposure period, see Table 1. - Results with reference substance (positive control):
- Results with reference substance valid: Yes
- EC50: 0.14 mg Zn/L
- A 72 hour acute toxicity test of zinc chloride was done to evaluate the health and sensitivity of this strain. The EC50 was 0.14 mg/L with 95% CI: 0.13 to 0.15 mg Zn/L. The historical mean =0.096 mg/L with a range of 0.053 to 0.14 mg Zn/L, March 2005 to present.
- Reference test run: 29th May- 2nd June, 2020 (three days before initiation of toxicity test) - Reported statistics and error estimates:
- Statistics run: Variance Ratio F test for homogeneity, Shapiro-Wilk's Test for normality, and William's Multiple Comparison Test to determine if treatment data were statistically similar to the controls. An Equal Variance Two-Sample t-Test was used to determine the NOEC/LOEC datapoints. All calculations were done within CETIS v1.9 software (Tidepool Scientific Software, McKinleyville, CA).
Any other information on results incl. tables
Table 2. 72-Hour Exposure of Pseudokirchenriella subcapitata to MTDID 58376- Cell Density and Observations.
Nominal Loading Rate (mg/L) |
Replicate |
Cell Densities at 24 hours (cells/mL) |
Cell Densities at 48 hours (cells/mL) |
Cell Densities at 72 hours (cells/mL) |
Control |
A |
33700 |
230000 |
716000 |
B |
34800 |
202000 |
679000 |
|
C |
37000 |
179000 |
759000 |
|
D |
36200 |
149000 |
663000 |
|
E |
36600 |
220000 |
1010000 |
|
F |
32600 |
169000 |
854000 |
|
Mean (SD) |
35100 (1770) |
191000 (31000) |
779000 (130000) |
|
100 |
A |
38000 |
210000 |
774000 |
B |
34400 |
186000 |
878000 |
|
C |
30300 |
153000 |
825000 |
|
D |
35500 |
231000 |
928000 |
|
E |
38800 |
191000 |
827000 |
|
F |
33400 |
221000 |
924000 |
|
Mean (SD) |
35100 (3100) |
199000 (28300) |
859000 (61200) |
Cells exposed to the treatment level tested and the control were observed to be normal.
Table 3. 72-Hour Exposure of Pseudokirchenriella subcapitata to MTDID 58376- Growth Rates and Acceptance Criteria Data
Control |
Growth rate: 0-24 Hour (1.01 days) |
Growth rate: 24-48 Hour (1.01 days) |
Growth rate: 48-72 Hour (0.989 days) |
Growth rate Overall: 0-72 Hours, 3.01 days (SD) |
% CV of Daily Growth Rate |
Rep A |
1.21 |
1.89 |
1.15 |
1.42 (0.41) |
29.21 |
Rep B |
1.24 |
1.74 |
1.22 |
1.40 (0.29) |
20.96 |
Rep C |
1.30 |
1.55 |
1.46 |
1.44 (0.13) |
9.01 |
Rep D |
1.28 |
1.40 |
1.51 |
1.39 (0.12) |
8.32 |
Rep E |
1.29 |
1.77 |
1.54 |
1.53 (0.24) |
15.62 |
Rep F |
1.17 |
1.63 |
1.64 |
1.48 (0.27) |
17.99 |
Mean % CV section-by-section growth rate |
- |
- |
- |
- |
16.90% |
Mean (SD) of overall 0-72 hour growth rates |
- |
- |
- |
- |
1.44 (0.05) |
% CV of 0-72 hour overall growth rate |
- |
- |
- |
- |
3.65% |
100 mg/L Rep A | 1.33 | - |
- | 1.44 | - |
Rep B | 1.22 | - | - | 1.49 | - |
Rep C | 1.10 | - | - | 1.47 | - |
Rep D | 1.26 | - | - | 1.50 | - |
Rep E | 1.34 | - | - | 1.47 | - |
Rep F | 1.20 | - | - | 1.50 | - |
Mean (SD) | 1.24 (0.09) | - | - | 1.48 (0.02) | - |
Applicant's summary and conclusion
- Validity criteria fulfilled:
- yes
- Remarks:
- control biomass increase >16x (78x), CV for section-by-section growth rates <35% (16.9%), CV for average specific growth rates <7% (3.65%)
- Conclusions:
- 72 hour EC50 >100 mg/L (OECD 201) in Pseudokirchneriella subcapitata.
72 hour EC10 >100 mg/L (OECD 201) in Pseudokirchneriella subcapitata - Executive summary:
The 72 hour EC50 and EC10 of ERGP IEM to Pseudokirchneriella subcapitata was determined according to OECD 201 guidelines in a limit test. Nominal concentrations of 100 mg/L and a blank control were run with six replicates per treatment level. No inhibition was observed and growth enhancement was not statistically significant. An EC50 of >100 mg/L, and an EC10 >100 mg/L (nominal concentrations) were determined.
The study was well-documented, followed an international standard method and was GLP compliant. The study is considered reliable without restrictions. The results from this study are considered suitable for Risk Assessment, Classification and Labeling, and PBT Analysis.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.