Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 472-740-6 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Administrative data
First-aid measures
Emergency measure - Inhalation: Using appriopriate personal protective equipment, move
exposed subject to fresh air. If breathing is difficult or
ceases, ensure and maintain ventilation. Give oxygen as
appropriate. The exposed subject should be kept warm and at
rest. Obtain medical attention in cases of known or possible
over exposure, or with symptoms including chest pain,
difficulty breathing, loss of consciousness or other adverse
effects, which may be delayed.
Emergency measure - Eyes: Wash immediately with clean and gently flowing water.
Continue for at least 15 minutes. Obtain medical attention.
Emergency measure - Skin: Using appropriate personal protective equipment, remove
contaminated clothing and flush exposed area with large
amounts of water. Obtain medical attention if skin reaction
occurs, which may be immediate or delayed.
Emergency measure - Ingestion: Seek medical attention immediately
Fire-fighting measures
Recommended extinguishing agent: No special requirements needed. Water is recommended for
fires involving packaging.
Product arising from burning: The substance is combustible and will burn if involved in
a fire, evolving noxious fumes (eg carbon and nitrogen
oxides and chlorine containing compounds).
Product determined by test: N
Protective equipment: Since toxic, corrosive or flammable vapours might be evolved
from fires involving this material, self contained
breathing apparatus and full protective equipment are
recommended.
Move containers from the fire area if possible without
increase personal risk.
If possible, contain and collect firefighting water for
later disposal.
Accidental release measures
Emergency measures in case of spillage: Fence or cordon the affected area and do not allow
individuals to touch or walk through the spilled material
unless wearing appropriate protective clothing. Avoid dust
generation.
Prevent entry into waterways, sewers, surface drainage
systems and poorly ventilated areas. If spill is outdoors,
cover with plastic sheet to minimise spreading or contact
with rain.
Collect and place it in a suitable, properly labelled
container for recovery or disposal. After all solid or
absorbent material has been collected; the area should be
vacuumed with HEPA filter-equipped apparatus. Following
removal of spillage, wash down spillage area with copious
amounts of water only if waste water can be directed to an
on-site waste water treatment system.
Water can be used for clean-up and decontamination
operations. No specific decontamination or detoxification
procedures have been identified for this material. Consider
use of water, detergent solutions or other soluble solvents,
for clean-up and decontamination operations.
Handling and storage
Handling: Avoid dispersion as a dust cloud.
Depending upon the scale of the operation, use of
appropriate exhaust ventilation is recommended to provide
routine control of fire and explosion hazards during
handling of this material.
Ignition Controls: Bond and earth (ground) all plant and
equipment to ensure that no isolated conductors are
present. Isolated conductors can accumulate sufficient
electrostatic charge to produce discharges of many hundreds
of milli- Joules. Consider earthing (grounding) personnel
dealing with dusty operations. The maximum surface
temperature of enclosures potentially exposed to this
material should be the lower of the values obtained by
taking 2/3 of the minimum ignition temperature for a dust
cloud or 75 K less than the minimum ignition
temperature of the dust layer, with a maximum temperature of
325 Deg C.
Protective Systems: Assess operations based upon available
dust explosion information to determine the suitability of
preventive or protective systems as precautionary measures
against possible dust explosions. If prevention is not
possible, consider protection by use of containment, venting
or suppression of dust handling equipment. Where explosion
venting is considered the most appropriate method of
protection, vent areas should preferably be calculated based
on the Kst rather than the St value. If nitrogen purging is
considered as the protective system, it must operate with
an oxygen level below the limiting oxygen concentration. The
system should include an oxygen monitoring and shut down
facility in the event of excessive oxygen being detected.
At both ambient and low humidity, this material is of low
conductivity. Generation of electrostatic charge is
considered likely to occur even when handled in an earthed
(grounded) environment.
At both ambient and low humidity, this material has a very
long charge relaxation time. Accumulation of electrostatic
charge is considered very likely to occur even when handled
in an earthed environment. Under these conditions, it is
considered that this material might present a very high
riskn of producing an electrostatic discharge.
Storage: Keep in tightly closed containers or packages away from
moisture and away from sources of ignition. Avoid prolonged
storage at elevated temperatures (> room temperature,
approximately 20 Deg C).
Packaging of the substance and or preparation: SB-392033 is recieved and stored in double antistatic
polyethylene liners. The double liners are stored inside
either 20 L steel drums or fibreboard kegs.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: None
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None reported.
Chemical reaction with water: None reported.
Dust explosion: This material is a non-combustible solid. Dust clouds are
potentially of low sensitivity to ignition from incendive
electrostatic discharges. Dust clouds are of very low
sensitivity to ignition from hot surfaces. No ignition or
exotherm of a powder layer observed up to 400 Deg C.
Ignition of a dust cloud produces a strong explosion. High
pressure between 8 and 10 bar is produced during a dust
explosion.
Dust explosion determined by test: Y
Disposal considerations
Industry - Possibility of recovery/recycling: Discharge to the environment is not aniticipated. Recovery
from minor spillages or accidental discharge is not
economically or technically feasible, and such waste
material will be disposed of by incineration.
In principle, it may be possible to recover and recycle
larger spillages of uncontaminated material for subsequent
use.
Industry - Possibility of neutralisation: No chemical treatment is practicable to neutralise the
hazardous health properties.
The dust hazard will be minimised by good industrial
hygiene.
Industry - Possibility of destruction: controlled discharge: Collect for recylcing or recovery if possible. Contaminated
containers or spillages of solutions mixed with inert
material (eg. sand or soil) are incinerated. Wherever
possible, disposal should be in an on-site licenced chemical
incinerator.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon,
nitrogen and chlorine oxides) could be formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly
tothe sewage system or the aqueous environment. All waste
including aqueous waste are incinerated.
Industry - Possibility of destruction - other: None.
Public at large - Possibility of recovery/recycling: Not applicable as substance is not made available to the
public.
Public at large - Possibility of neutralisation: Not applicable as substance is not made available to the
public.
Public at large - Possibility of destruction: controlled discharge: Not applicable as substance is not made available to the
public.
Public at large - Possibility of destruction - incineration: Not applicable as substance is not made available to the
public.
Public at large - Possibility of destruction - water purification: Not applicable as substance is not made available to the
public.
Public at large - Possibility of destruction - others: None.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.