Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-798-5 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Biodegradation in water: screening tests
Administrative data
Link to relevant study record(s)
- Endpoint:
- biodegradation in water: ready biodegradability
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From August 04, 2017 to October 30, 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 301 F (Ready Biodegradability: Manometric Respirometry Test)
- Deviations:
- not specified
- GLP compliance:
- yes (incl. QA statement)
- Oxygen conditions:
- aerobic
- Inoculum or test system:
- other: activated sludge, domestic, pre-conditioned to the experimental conditions
- Details on inoculum:
- Test organisms
Activated sludge was obtained from Totnes Sewage Treatment Works, Totnes, Devon, UK on 23 August 2017. This works treats sewage of predominantly domestic origin. At the laboratory, the activated sludge was kept aerated at room temperature and the pH maintained at 7.0 ± 1.0. Six days prior to the exposure start the activated sludge was centrifuged, washed and re suspended in the mineral medium and the solids concentration determined. This sludge was then diluted in medium, added to test bottles and stirred until required for use. The seeded mineral medium was pre-conditioned for six days to reduce the blank oxygen uptake readings in the test. - Duration of test (contact time):
- ca. 60 d
- Initial conc.:
- ca. 100 mg/L
- Based on:
- test mat.
- Parameter followed for biodegradation estimation:
- O2 consumption
- Details on study design:
- Test apparatus
The measurement of oxygen uptake was conducted in the Oxitop™ respirometers (Wissenschaftlich-Technische Werkstätten, GmbH, Germany). Each individual unit consisted of a dark glass 500 mL bottle with an OxitopÔbottle top containing a piezoresistive electronic pressure sensor. Bottles were situated on a magnetic stirrer in a constant temperature incubator. Carbon dioxide produced by microbial respiration was absorbed by potassium hydroxide solution (KOH) placed in a seal cup in the neck of each bottle, and the oxygen taken up was measured as a decrease in pressure. The Oxitop™ controller collected the pressure values from the measuring tops and calculated the BOD (as mg/L). - Reference substance:
- benzoic acid, sodium salt
- Remarks:
- 100 mg/L
- Test performance:
- Validity Criteria
The validity requirements of the OECD guideline state:
1) The difference between extremes of replicate biodegradation values should be less than 20% at the end of 10-day window, at the plateau or at the end of the test;
2) The positive control should achieve > 60% biodegradation by Day 14.
3) The oxygen consumption of the inoculum blank should not exceed 60 mg/L in 28 days.
Mean oxygen uptake of the inoculum blank was below 60 mg/L, as required in the OECD guideline. The difference between replicate test substance extremes was < 20% after the 10-d window, at plateau, and on Day 60. Sodium benzoate reached a mean 74% biodegradation by Day 14. The average of the mean oxygen consumed in the inoculum blanks was 6.9 mg/L after 28 d and 8.4 mg/L after 60 d. Therefore, this test has satisfied all the validity criteria. - Key result
- Parameter:
- % degradation (O2 consumption)
- Remarks:
- Test substance
- Value:
- ca. 40
- Sampling time:
- 28 d
- Remarks on result:
- other: not readily biodegradable, but considered to be inherently biodegradable
- Key result
- Parameter:
- % degradation (O2 consumption)
- Value:
- ca. 64
- Sampling time:
- 40 d
- Remarks on result:
- other: inherently biodegradable
- Key result
- Parameter:
- % degradation (O2 consumption)
- Remarks:
- Reference substance
- Value:
- ca. 74
- Sampling time:
- 14 d
- Remarks on result:
- other: >60% degradation confirmed that the activated sludge contained viable organism
- Key result
- Parameter:
- % degradation (O2 consumption)
- Remarks:
- Toxicity control
- Value:
- ca. 40
- Sampling time:
- 14 d
- Remarks on result:
- other: >25% degradation confirmed that the test substance is assumed not to be inhibitory at used concentration
- Details on results:
- pH and temperature measurements
At the end of the 60-d test period, the pH values were 7.3 in the inoculum blank bottles, ranged from 6.7 to 7.0 in the sodium benzoate bottles, from 6.9 to 7.0 in the test substance bottlesand from 6.7 to 6.9 in the toxicity control bottles. Temperature measurements recorded in several of the test bottles on Days 0 and 60 indicated the temperature was within the range 22 ± 1°C. Continuous monitoring of the incubator temperature showed it to have remained within the range 22 ± 1°C throughout the study. - Results with reference substance:
- Theoretical oxygen demand (ThOD)
The ThOD of sodium benzoate was calculated as 1.67 g O2/g of substance, using the formula given in the OECD guideline. Biodegradation of sodium benzoate has been calculated on the basis of calculated ThOD.
Biochemical oxygen demand (BOD)
The results for the reference substance did show that sodium benzoate attained a mean level of biodegradation (based on the BOD:ThOD ratio) of 86%, and the results showed good replication. More than 60% degradation was achieved within the 10-day window as expected for a biodegradable substance, thus confirming that the activated sludge contained viable organisms. - Validity criteria fulfilled:
- yes
- Interpretation of results:
- inherently biodegradable
- Conclusions:
- Under study conditions, the test substance was considered to be inherently biodegradable.
- Executive summary:
A study was conducted to determine the ready biodegradability of the test substance, 'mono- and di- C16 PSE, K+ and H3PO4' (purity: 100%), using Manometric respirometry method, according to OECD Guideline 301F, in compliance with GLP. Following the pre-conditioning, the test bottles containing prepared activated sludge inoculum in mineral medium were set up for the test according to the experimental design. In the study, Inoculum blanks, positive control (sodium benzoate at 100 mg/L), test substance (100 mg/L) as well as toxicity controls (test and reference substances, both at 100 mg/L), each these group bottles were prepared in triplicate, except inoculum blanks which were prepared in duplicate. Additional single replicate test substance and toxicity control bottles were prepared for determination of pH at Day 0, so undissolved test substance was not removed by the pH probe. Oxygen uptake was recorded automatically every 240 minutes during the 60 d experimental period. Oxygen uptake values were corrected for the inoculum blank and the biodegradation was calculated as a percentage of the chemical oxygen demand (COD) for the substance under test and as a percentage of the theoretical oxygen demand (ThOD) for the reference substance. The chemical oxygen demand (COD) of test substance was determined using spectrophotometer for evaluation. The test substance attained a mean level of biodegradation (based on the BOD:COD ratio) of 40% after 28 d and 64% after 60 d. The test substance results showed good replication. Less than 60% degradation was achieved within 28 d, so test substance was classified as inherently biodegradable. Sodium benzoate attained a mean level of biodegradation (based on the BOD:ThOD ratio) of 86%, and the results showed good replication. More than 60% degradation was achieved within the 10-d window as expected for a biodegradable substance, thus confirming that the activated sludge contained viable organisms. The mean toxicity control degradation achieved on Day 14 was 40% (based on combined ThOD/COD), as this was > 25% the test substance was assumed not to be inhibitory at this concentration. The test met all the validity criteria. Under the study conditions, the test substance was considered to be inherently biodegradable (Scymaris, 2017).
Reference
Results
Theoretical oxygen demand (ThOD)
The ThOD of sodium benzoate was calculated as 1.67 g O2/g of substance, using the formula given in the OECD guideline. Biodegradation of sodium benzoate has been calculated on the basis of calculated ThOD.
Chemical oxygen demand (COD)
The measured COD value of test substance was 1.50 g O2/g of substance, and its biodegradation was calculated on the basis of measured COD.
Biochemical oxygen demand (BOD)
The results for the reference substance did show that sodium benzoate attained a mean level of biodegradation (based on the BOD:ThOD ratio) of 86%, and the results showed good replication. More than 60% degradation was achieved within the 10-d window as expected for a biodegradable substance, thus confirming that the activated sludge contained viable organisms.
Biodegradation results – Reference Substance
Day |
Sodium benzoate (blank corrected) BOD (mg/L) |
BODa(g O2/g) |
Biodegradationb(%) |
|||||||
Rep 1 |
Rep 2 |
Rep 3 |
Rep 1 |
Rep 2 |
Rep 3 |
Rep 1 |
Rep 2 |
Rep 3 |
Mean |
|
7 |
96.5 |
119 |
122 |
0.97 |
1.19 |
1.22 |
58 |
71 |
73 |
67 |
14 |
109 |
131 |
134 |
1.09 |
1.31 |
1.34 |
65 |
78 |
80 |
74 |
21 |
109 |
137 |
135 |
1.09 |
1.37 |
1.35 |
65 |
82 |
81 |
76 |
28 |
114 |
136 |
136 |
1.14 |
1.36 |
1.36 |
68 |
81 |
81 |
77 |
35 |
116 |
141 |
141 |
1.16 |
1.41 |
1.41 |
69 |
84 |
84 |
79 |
42 |
115 |
143 |
140 |
1.15 |
1.43 |
1.40 |
69 |
86 |
84 |
80 |
49 |
114 |
148 |
145 |
1.14 |
1.48 |
1.45 |
68 |
89 |
87 |
81 |
56 |
110 |
152 |
152 |
1.10 |
1.52 |
1.52 |
66 |
91 |
91 |
83 |
60 |
116 |
158 |
155 |
1.16 |
1.58 |
1.55 |
69 |
95 |
93 |
86 |
BOD: Biological Oxygen Demand
a BOD (g O2/g) =Blank corrected biodegradation (mg/L)
Sodium benzoate concentration (100 mg/L)
b Biodegradation (%) =Biological Oxygen Demand (g O2/g)× 100
ThOD (1.67 g O2/g)
The following phases (approximate) were observed:
Phase |
Time period |
Lag phase |
Days 0 to 1 |
Degradation phase |
Days 1 to 18 |
10-day window |
Days 1 to 11 |
The results for test substance did show that test substance attained a mean level of biodegradation (based on the BOD:COD ratio) of 40% after 28 d and 64% after 60 d, and the results showed good replication. Less than 60% degradation was achieved within 28 d, so test substance cannot be classified as readily biodegradable.
Biodegradation results – Test substance
Day |
Test substance (blank corrected) BOD (mg/L) |
BODa(g O2/g) |
Biodegradationb(%) |
|||||||
Rep 1 |
Rep 2 |
Rep 3 |
Rep 1 |
Rep 2 |
Rep 3 |
Rep 1 |
Rep 2 |
Rep 3 |
Mean |
|
7 |
9.3 |
14.9 |
14.9 |
0.09 |
0.15 |
0.15 |
6 |
10 |
10 |
9 |
14 |
35.3 |
32.5 |
35.3 |
0.35 |
0.33 |
0.35 |
23 |
22 |
23 |
23 |
21 |
50.7 |
47.9 |
50.7 |
0.51 |
0.48 |
0.51 |
34 |
32 |
34 |
33 |
28 |
60.6 |
55.0 |
60.6 |
0.61 |
0.55 |
0.61 |
41 |
37 |
41 |
40 |
35 |
70.6 |
65.0 |
65.0 |
0.71 |
0.65 |
0.65 |
47 |
43 |
43 |
44 |
42 |
80.7 |
72.3 |
72.3 |
0.81 |
0.72 |
0.72 |
54 |
48 |
48 |
50 |
49 |
88.5 |
80.0 |
77.2 |
0.89 |
0.80 |
0.77 |
59 |
53 |
51 |
54 |
56 |
95.9 |
87.4 |
87.4 |
0.96 |
0.87 |
0.87 |
64 |
58 |
58 |
60 |
60 |
102 |
92.6 |
92.6 |
1.02 |
0.93 |
0.93 |
68 |
62 |
62 |
64 |
BOD: Biological Oxygen Demand
a Biological oxygen demand (g O2/g) =Blank corrected biodegradation (mg/L)
Substance concentration (100 mg/L)
b Biodegradation (%) =Biological Oxygen Demand (g O2/g)× 100
COD (1.50 g O2/g)
The following phases (approximate) were observed:
Phase |
Time period |
Lag phase |
Days 0 to 7 |
Degradation phase |
Days 7 to 49 |
Combined ThOD/COD for toxicity control
The mean toxicity control degradation achieved on Day 14 was 40% (based on combined ThOD/COD), as this was > 25% the test substance was assumed not to be inhibitory at this concentration.
Biodegradation results – Toxicity Control
Day |
Toxicity control (blank corrected) BOD (mg/L) |
BODa(g O2/g) |
Biodegradationb(%) |
|||||||
Rep 1 |
Rep 2 |
Rep 3 |
Rep 1 |
Rep 2 |
Rep 3 |
Rep 1 |
Rep 2 |
Rep 3 |
Mean |
|
7 |
111 |
105 |
108 |
0.56 |
0.53 |
0.54 |
35 |
33 |
34 |
34 |
14 |
125 |
117 |
131 |
0.63 |
0.59 |
0.66 |
40 |
37 |
42 |
40 |
21 |
137 |
126 |
143 |
0.69 |
0.63 |
0.72 |
43 |
40 |
45 |
43 |
28 |
148 |
139 |
153 |
0.74 |
0.70 |
0.77 |
47 |
44 |
48 |
46 |
35 |
161 |
147 |
161 |
0.81 |
0.74 |
0.81 |
51 |
47 |
51 |
50 |
42 |
168 |
157 |
171 |
0.84 |
0.79 |
0.86 |
53 |
50 |
54 |
52 |
49 |
173 |
170 |
176 |
0.87 |
0.85 |
0.88 |
55 |
53 |
55 |
54 |
56 |
180 |
180 |
183 |
0.90 |
0.90 |
0.92 |
57 |
57 |
58 |
57 |
60 |
186 |
186 |
186 |
0.93 |
0.93 |
0.93 |
58 |
58 |
58 |
58 |
BOD: Biological Oxygen Demand
a Biological oxygen demand (g O2/g) =Blank corrected biodegradation (mg/L)
Toxicity control concentration (200 mg/L)
b Biodegradation (%) =Biological Oxygen Demand (g O2/g)× 100
Combined ThOD/COD (1.59 g O2/g)
Description of key information
Based on the study results, the test substance was determined to be inherently biodegradable.
Key value for chemical safety assessment
- Biodegradation in water:
- inherently biodegradable
Additional information
A study was conducted to determine the ready biodegradability of the test substance, 'mono- and di- C16 PSE, K+ and H3PO4' (purity: 100%), using Manometric respirometry method, according to OECD Guideline 301F, in compliance with GLP. Following the pre-conditioning, the test bottles containing prepared activated sludge inoculum in mineral medium were set up for the test according to the experimental design. In the study, Inoculum blanks, positive control (sodium benzoate at 100 mg/L), test substance (100 mg/L) as well as toxicity controls (test and reference substances, both at 100 mg/L), each these group bottles were prepared in triplicate, except inoculum blanks which were prepared in duplicate. Additional single replicate test substance and toxicity control bottles were prepared for determination of pH at Day 0, so undissolved test substance was not removed by the pH probe. Oxygen uptake was recorded automatically every 240 minutes during the 60 d experimental period. Oxygen uptake values were corrected for the inoculum blank and the biodegradation was calculated as a percentage of the chemical oxygen demand (COD) for the substance under test and as a percentage of the theoretical oxygen demand (ThOD) for the reference substance. The chemical oxygen demand (COD) of test substance was determined using spectrophotometer for evaluation. The test substance attained a mean level of biodegradation (based on the BOD:COD ratio) of 40% after 28 d and 64% after 60 d. The test substance results showed good replication. Less than 60% degradation was achieved within 28 d, so test substance was classified as inherently biodegradable. Sodium benzoate attained a mean level of biodegradation (based on the BOD:ThOD ratio) of 86%, and the results showed good replication. More than 60% degradation was achieved within the 10-d window as expected for a biodegradable substance, thus confirming that the activated sludge contained viable organisms. The mean toxicity control degradation achieved on Day 14 was 40% (based on combined ThOD/COD), as this was > 25% the test substance was assumed not to be inhibitory at this concentration. The test met all the validity criteria. Under the study conditions, the test substance was considered to be inherently biodegradable (Scymaris, 2017).
[Type of water: freshwater]
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.