Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air.  Seek medical attention if irritation

occurs.

Emergency measure - Eyes: Rinse eyes with copious amounts of water and seek immediate

medical attention.

Emergency measure - Skin: Wash affected area thoroughly with soap and water.  If

irritation occurs, seek medical attention.

Emergency measure - Ingestion: Drink plenty of water.  Seek immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Powder, CO2, foam or water

Product arising from burning: The substance is combustible and will burn if involved in a

fire, evolving noxious fumes (eg carbon and nitrogen

oxides). However, there is no experimental evidence to

support the expected combustion products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing

apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.

Wear appropriate personal protective equipment conforming to

the relevant national or international standards as

mentioned in section 2.3.10.

Avoid dust formation by damping down with water.  Absorb

spillages of solutions with a suitable inert material (eg

sand or soil). Carefully transfer the spillage to waste

containers, or use a sealed industrial vacuum machine.

Containers filled with waste material must be labelled in

the same way as the original KZ-113 containers.

Clean the spillage area with water and detergent.

Dispose of waste material by incineration or landfill in

accordance with local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in

conditions of good industrial hygiene and in conformity with

any local regulations in order to minimise exposure.

Engineering controls are necessary to reduce exposure to the

substance.

When exposure cannot be prevented or adequately

controlled,appropriate personal protective equipment should

be worn. Such protective equipmemt should conform to the

appropriate international or national standards as follows;

Chemical protective gloves to Standard prEN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard prEN166

When necessary appropriate respiratory protection should be

used, e.g. a dust mask conforming to EN149 FFP1.

The standards mentioned above should be regarded as a

minimum.

Storage: Store in a cool, dry well-ventilated area.

Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: Glass bottle.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: None
Transport: Avoid breaking the containers. In the event of spillage,
refer to the instructions on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known.

Chemical reaction with water: None that is hazardous.

Dust explosion: Not anticipated.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from

minor spillages or accidental discharge is not economically

or technically feasible, and such waste material will be

disposed of by incineration or landfill.

Industry - Possibility of neutralisation: No chemical treatment is practicable to neutralise the

hazardous health properties.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with

inert material (eg sand or soil) may be disposed of by

landfill at an authorised tip in accordance with local

regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning

under controlled conditions at a licensed waste treatment

processor in accordance with local regulations. Stack gases

should be scrubbed, because noxious fumes (eg carbon and

nitrogen oxides) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to

the sewage system or the aqueous environment.  However,

adverse effects on sewage treatment systems would be

unlikely, as the substance is unstable in water.

Industry - Possibility of destruction - other: None known

Public at large - Possibility of recovery/recycling: Not applicable

Public at large - Possibility of neutralisation: Not applicable

Public at large - Possibility of destruction: controlled discharge: Not applicable

Public at large - Possibility of destruction - incineration: Not applicable

Public at large - Possibility of destruction - water purification: Not applicable

Public at large - Possibility of destruction - others: Not applicable