Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. Seek medical attention if symptoms
develop (give oxygen or start mouth to mouth resuscitation
as appropriate).


In all cases, remove contaiminated clothing and launder
before re-use.
Emergency measure - Eyes: Wash immediately with water for at least 15 minutes. Seek
medical attention.
Emergency measure - Skin: Thoroughly wash with soap and water. Seek medical attention.
Emergency measure - Ingestion: Wash out mouth and drink plenty of water. Seek medical
attention.

Fire-fighting measures

Recommended extinguishing agent: Use dry powder, foam or halons.

Product arising from burning: Combustion products may contain carbon, nitrogen and sulphur

oxides together with some hydrogen chloride gas and soot.

Product determined by test: N

Protective equipment: Wear a self-contained breathing apparatus.

Accidental release measures

Emergency measures in case of spillage: Wear skin, eye and respiratory protection (see 2.3.1).

Isolate and evacuate the affected area. Collect the spillage

by careful sweeping or vacuum cleaning and transfer to

suitably labelled, sealable, double polyethylene bag for

recovery or disposal by incineration. Wash down the

contaminated area with copious amounts of water and

detergent. All washings should be collected and disposed of

appropriately.

Handling and storage

Handling: Small quantities should be handled in a fume cupboard.

Gloves and a dust mask (half-face type) should be worn.


Large quantities should be handled in an enclosed working

area with restricted access. Use mechanical ventilation

wherever possible.


Skin, eye and respiratory protection should be worn when

handling large quantities of the substance, and during

batching operations; e.g. plastic or rubber gloves (BS

1651), knee-length rubber boots (BS 1870) and an air-fed

plastic suit (manufactured in accordance with national

requirements).

Storage: Store in a clearly labelled sealed container in a cool, dry

and well ventilated area. Packaging will be either double

polyethylene bags in closed kegs or plastic bags inside

fibreboard containers (30-35 kg).

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: No special Precautions.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: The substance may be recovery by disslovlving in water,
passing through a 10 micron filter and recrystallisation
following the addition of ethyl acetate.

Industry - Possibility of neutralisation: Neutralisation is not recommended as the chemicals required
would increase the hazard.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: Disposal by incineration at a facility equipped with waste
gas treatment to remove nitrogen and sulphur oxides and
hydrogen chloride gas should nbe used. The incineration
temperature should be in the range 1000-1200 deg C.

Industry - Possibility of destruction - water purification: Not recommended.

Public at large - Possibility of recovery/recycling: The substance will not enter the public domain.