Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove patient to fresh air. Seek medical attention.
Emergency measure - Eyes: Rinse eyes thoroughly for at least 15 minutes with clean
water. Seek medical attention.
Emergency measure - Skin: Remove contaminted clothing (launder before re-use). Rinse
affected area thoroughly for at least 15 minutes. If
irritation persists seek medical attention.
Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water fog or foam may be used.

Product arising from burning: Products of combustion may contain oxides of carbon together
with some soot.

Product determined by test: N

Protective equipment: Full protective clothing and a self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Wear suitable protective clothing (see 2.3.1).

Material is readily dispersible in water which may result in
an effluent discharge with elevated colour and suspended
solids. Prevent material from entering sewers or other
waterways.

Absorb spillages of dispersions with a suitable inert
material (eg. sand or soil). Carefully transfer the spillage
to suitably labelled waste containers, or use a sealed
industrial vacuum machine. Clean the spillage area with
water and detergent.


Dispose of waste material by incineration in accordance with
local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure by
ingestion and skin contact.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards ie. chemical protective
gloves (Standard prEN374), chemical resistant clothing
(Standard EN368), eye protection (Standard prEN166).


When necessary appropriate respiratory protection should be
used.

Storage: Store in tightly sealed containers in a dry well-ventilated
area.

Packaging of the substance and or preparation: 1 litre plastic bottles.

10 litre plastic containers.

5, 15 or 55 gallon high density polypropylene containers.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: No special precautions.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: Not anticipated based on analogy to carbon black and lack of
reactive groups.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery for recycling is not possible.

Industry - Possibility of neutralisation: Not applicable.

Industry - Possibility of destruction: controlled discharge: Should not be discharged to the environment.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration in
accordance with local regulations. Waste gas treatment to
remove oxides of nitrogen should be fitted. (A661)

Industry - Possibility of destruction - water purification: Not recommended.

Public at large - Possibility of recovery/recycling: The substance will only enter the public domain in the form
of articles that can be disposed of as domestic waste.