Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: If symptomatic, move to fresh air. Treat symptomatically.
Get medical attention if symptoms persist.
Emergency measure - Eyes: Any material that contacts the eye should be washed out
immediately with water. Get medical attention if symptoms
occur.
Emergency measure - Skin: Wash with soap and water. Get medical attention if symptoms
occur.
Emergency measure - Ingestion: Seek medical attention immediately.

Fire-fighting measures

Recommended extinguishing agent: Water spray, carbon dioxide (CO2), dry chemical

Product arising from burning: Oxides of carbon and nitrogen.

Protective equipment: Wear self-contained breathing apparatus and protective
clothing. Fire or excessive heat may produce hazardous

decomposition products.

Accidental release measures

Emergency measures in case of spillage: Clean surface thoroughly to remove residual contamination.
Collect up and put in a suitable container.

Avoid generation of dust.

Handling and storage

Handling: Personal Precautionary Measures:

Avoid prolonged or repeated breathing of dust. Avoid contact
with eyes and prolonged or repeated contact with skin. Use
with adequate ventilation. Wash thoroughly after handling.


Prevention of Fire and Explosion:

Powdered material may form explosive dust-air mixtures.
Minimize dust generation and accumulation. Use with

adequate ventilation. Keep away from sources of ignition.
Keep from contact with oxidizing materials.

Storage: Keep container closed.

Packaging of the substance and or preparation: The dye will be imported as a solid in 5-kilogram pre-
weighed sealed poly lined bags in cardboard boxes.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: None, not regulated
Transport: None, not regulated
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Powdered material may form explosive dust-air mixtures.

Chemical reaction with water: Not hazardous. Experience in use and structure activity
relationships indicate that the test substance is not
hazardous in contact with water or humid air.

Dust explosion: There are no data or experience indicating this substance
presents a dust explosion hazard; however no testing has
been conducted to characterize its dust explosivity
properties. Fines of this substance, like those of many
organic dusts, may be capable of forming explosive dust
clouds in air. Minimize dust generation and accumulation.
Keep away from sources of ignition.

Use adequate ventilation.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: It is not practical to recover or recycle the substance

Industry - Possibility of neutralisation: It is not practical to neutralize the substance.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: A temperature of 1000 degrees C is expected to be sufficient
to destroy the substance. Combustion will produce carbon
oxides and nitrogen oxides (NOx).

Industry - Possibility of destruction - water purification: Kodak Industrie, Chalon, France:


Wastes from formulation activities are released to the
shared industrial waste treatment facility, Station de
l'AUZIN. Assuming ready biodegradability of the test
substance, the SIMPLETREAT model predicts approximately 74%
removal during wastewater treatment (based on the log P
value of 0.74 and the estimated Henry's Law constant (H) of
1.05e-021 Pa.m3.mole-3).


Kodak Limited, Harrow, UK:


Any wastes that remain after removal at the on-site
facilities will be discharged to the Mogden municipal
treatment works. Assuming ready biodegradability of the
test substance, the SIMPLETREAT model predicts approximately
74% removal during wastewater treatment (based on the log P
value of 0.74 and the estimated Henry's Law constant (H) of
1.05e-021 Pa.m3.mole-3).

Industry - Possibility of destruction - other: None

Public at large - Possibility of recovery/recycling: It is not practical to recover or recycle the substance

Public at large - Possibility of neutralisation: It is not practical to neutralize the substance.

Public at large - Possibility of destruction: controlled discharge: Not recommended.

Public at large - Possibility of destruction - incineration: A temperature of 1000 degrees C is expected to be sufficient
to destroy the substance. Combustion will produce carbon
oxides and nitrogen oxides (NOx).

Public at large - Possibility of destruction - water purification: Kodak Industrie, Chalon, France:


Wastes from formulation activities are released to the
shared industrial waste treatment facility, Station de
l'AUZIN. Assuming ready biodegradability of the test
substance, the SIMPLETREAT model predicts approximately 74%
removal during wastewater treatment (based on the log P
value of 0.74 and the estimated Henry's Law constant (H) of
1.05e-021 Pa.m3.mole-3).


Kodak Limited, Harrow, UK:


Any wastes that remain after removal at the on-site
facilities will be discharged to the Mogden municipal
treatment works. Assuming ready biodegradability of the
test substance, the SIMPLETREAT model predicts approximately
74% removal during wastewater treatment (based on the log P
value of 0.74 and the estimated Henry's Law constant (H) of
1.05e-021 Pa.m3.mole-3).

Public at large - Possibility of destruction - others: None