Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Move to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Seek
immediate medical attention.
Emergency measure - Eyes: Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower lids. Seek
immediate medical attention.
Emergency measure - Skin: Wash affected area with soap and plenty of water for at
least 15 minutes. Remove contaminated clothing and launder
before re-use. Seek medical attention if irritation occurs.
Emergency measure - Ingestion: If victim is conscious and alert give water or milk to
drink. Seek immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water fog, dry chemical, foam or CO2.

Product arising from burning: The substance is flammable and will burn if involved in a
fire, evolving noxious fumes (eg oxides of carbon, nitrogen
and sulfur and sodium compounds). However, there is no
experimental evidence to support the anticipated combustion
products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.


Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards, as
mentioned in section 2.3.10.


Avoid dust formation by damping down with water.
Carefullytransfer the spillage to waste containers, or use a
sealed industrial vacuum machine. Containers filled with
waste material must be labelled in the same way as the
original substance containers.


Clean the spillage area with water and detergent. Do not
discharge wastes to drain.


Dispose of waste material in accordance with local
regulations by incineration or landfill

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
other than by the use of personal protective equipment, such
protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical protective clothing to Standard EN368

Eye protection to Standard EN166.


Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling exposure,
be suitable for the purpose, and conform to the appropriate
international or national standards, such as a dust mask
conforming to EN149 FFP1.

These measures should be regarded as a minimum.

Storage: Store in a cool, dry, well-ventilated place away from heat,
sunlight, and sources of ignition.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 25 kg cardboard boxes.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: No classification assigned.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: The material is stable under normal temperatures and
pressures.


Avoid contact with strong acids, strong bases and strong
oxidising agents.


Avoid heat and static discharge.

Chemical reaction with water: None

Dust explosion: There is a potential dust explosion hazard from this organic
powder.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration or landfill. In principle, it
may be possible to recover larger spillages of
uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: No chemical treatment is known to neutralise the staining
properties of the substance.


The notification tests have shown that the substance is
acutely harmful to aquatic organisms. No chemical treatment
is known to neutralise this hazardous effect.


The potential dust hazard will be minimised by appropriate
storage, ventilation and handling techniques.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg. sand or soil) may be disposed of by
landfill at an authorised tip in accordance with local
regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg oxides of
carbon, nitrogen and sulfur and sodium-containing compounds)
could be formed.

Industry - Possibility of destruction - water purification: The substance should not be discharged directly to the
sewage system or the aqueous environment.

Industry - Possibility of destruction - other: None

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: Not applicable.