Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: If exposure to vapour, mists or fumes causes drowsiness,
headache, blurred vision or irritation, remove immediately
to fresh air. Keep patient warm and at rest. If any symptoms
persist obtain medical advice.
Emergency measure - Eyes: Immediately flush eyes with a copious amount of water for at
least 15 minutes. Obtain medical attention if irritation
occurs.
Emergency measure - Skin: Remove contaminated clothing. Wash skin thoroughly with soap
and water. Obtain medical attention if irritation occurs.
Emergency measure - Ingestion: Obtain immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Carbon dioxide, dry chemical, alcohol foam or water fog.

Product arising from burning: Oxides of carbon.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.


Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity. Eliminate all
ignition sources.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards.



Absorb spillages of solutions with a suitable inert material
(eg. sand or soil). Carefully transfer the spillage to
waste containers, or use a sealed

industrial vacuum machine. Containers filled with waste
material must be labelled in the same way as the original
substance containers.


Clean the spillage area with detergent and water. For large
spills, dike spilled material or otherwise contain the
material to ensure run-off does not reach a waterway.


Dispose of waste material in accordance with local
regulations by incineration.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid contact with skin.



Engineering controls are necessary to reduce exposure to the
substance.



When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical protective clothing to Standard EN368

Eye protection to Standard EN166.

On the rare occossion when respiratory protective equipment
has to be used, for example, in the event of power failure,
it must be capable of adequately controlling exposure, be
suitable for the purpose, and conform to the appropriate
international or national standards.

These measures should be regarded as a minimum.

Storage: Store in a segregated and approved area in containers
designed for use.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: Neat substance: Marine bulk tanks and isotanks

Finished lubricants: Bulk, isotanks, 200L drums, 4L and 1L
containers.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: None
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: Not applicable.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration or landfill. In principle, it
may be possible to recover larger spillages of
uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is not
classified as 'dangerous'.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed
with inert material (eg. sand or soil) may be disposed of by
landfill at an authorised tip in accordance with local
regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon
oxides) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly
tothe sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Disposal via a local waste oil collection point is
recommended.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not recommended by the general public.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: None.