Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. If respiratory symptoms develop, seek
medical attention.
Emergency measure - Eyes: Wash out with plenty of water for at least 15 minutes. Seek
medical advice if irritation occurs.
Emergency measure - Skin: Wash off affected area with flowing water, using soap.
Remove contaminated clothes and launder before using again.
Seek medical advice if redness occurs.
Emergency measure - Ingestion: Drink plenty of water. Do not induce vomiting. Seek medical
advice immediately.

Fire-fighting measures

Recommended extinguishing agent: Water, foam, carbon dioxide or dry chemicals.

Product arising from burning: The product is combustible and can be expected to evolve
oxides of carbon, and silicone and phorphorous containing
compounds when burnt.

Product determined by test: N

Protective equipment: Full protective equipment and self-contained breathing
apparatus must be worn.


Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: In case of spillage, wear appropriate personal protective
equipment conforming to the relevant national standards.

Absorb spillages of solution with a suitable inert material
(e.g. sand or soil). Carefully transfer the spillage to
waste containers, or use a sealed industrial vacuum machine.


Containers filled with waste material must be labelled in
the same way as the original containers.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to minimise exposure.


Engineering controls are necessary to reduce exposure to the
substance.



When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical protective clothing to Standard EN368

Eye protection to Standard EN166.


Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling
exposure, be suitable for the purpose, and conform to the
appropriate international or national standards, such as a
dust mask conforming to EN149 FFP1.


These measures should be regarded as a minimum.

Storage: The substance should be stored in a dry, well ventilated
area.

Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 15 kg cardboard box, plastic box, or metal pail.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: Not regulated.
Transport: None
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known

Chemical reaction with water: This substance had no reaction with water.

Dust explosion: Not applicable, as substance is present only in highly
compacted tablet form.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Absorb spillages of solutions with a suitable inert material
e.g. sand or soil. Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be

labelled in the same way as the original containers.

Industry - Possibility of neutralisation: The substance can be disposed of by incineration, by burning
under controlled conditions. Stack gases should be

scrubbed.

Industry - Possibility of destruction: controlled discharge: Contaminated containers and spillages should be disposed of
by incineration by burning under controlled conditions at a
licenced waste treatment processor in accordance with local
regulations. Stack gasses should be scrubbed, as noxious
gases could be formed.

Industry - Possibility of destruction - incineration: The substance should be disposed of by incineration by
burning under controlled conditions at a licenced waste
treatment processor in accordance with local regulations.
Stack gasses should be scrubbed, as noxious gases could be
formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be unlikel
y.

Industry - Possibility of destruction - other: None known.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable

Public at large - Possibility of destruction - incineration: Not applicable

Public at large - Possibility of destruction - water purification: Not applicable

Public at large - Possibility of destruction - others: Not applicable