Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 473-210-7 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove to fresh air. Seek medical attention.
Emergency measure - Eyes: Immediately flush eyes with copious amounts of water for at
least 15 minutes. Seek urgent medical attention.
Emergency measure - Skin: Wash affected area with soap and water. Seek medical
attention.
Emergency measure - Ingestion: Rinse out mouth with water. Seek medical attention.
Fire-fighting measures
Recommended extinguishing agent: Water fog, foam, carbon dioxid and dry chemicals
Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon, nitrogen, fluorine
and phosphorus oxides and also fluorine containing
compounds). However, there is no experimental evidence to
support the anticipated combustion products.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Accidental release measures
Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.
Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section "Handling".
Avoid dust formation by damping down with water. Absorb
spillages of solutions with a suitable inert material (eg
sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original containers.
Clean the spillage area with water and detergent.
Dispose of waste material by incineration or landfill in
accordance with local regulations.
Handling and storage
Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;
Chemical protective gloves to Standard EN374
Chemical resistant clothing to Standard EN368
Eye protection to Standard EN166.
When necessary appropriate respiratory protection should be
used. e.g. a dust mask conforming to EN149 FFP1.
The standards mentioned above should be regarded as a
minimum.
Storage: Store in a cool, dry, well-ventilated area.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: Brown coloured polyplastic bottle (3 l)
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport: None
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None known
Chemical reaction with water: None which is hazardous.
Dust explosion: There is a possible dust explosivity hazard from this
substance.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Discharge to the environment will not occur as all waste is
incinerated. However, recovery from minor spillages or
accidental discharge is not economically or technically
feasible, and such waste material will be disposed of by
incineration or landfill. In principle, it may be possible
to recover larger spillages of uncontaminated material for
subsequent use.
Industry - Possibility of neutralisation: None
Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg sand or soil) may be disposed of by
landfill at an authorised tip in accordance with local
regulations.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon,
nitrogen, fluorine and phosphorus oxides) could be formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.
Public at large - Possibility of recovery/recycling: Not applicable
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
