Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. If respiratory problems develop seek

medical attention.

Emergency measure - Eyes: Irrigate with running water for at least 15 minutes and seek

medical attention if irritation occurs.

Emergency measure - Skin: Wash with free flowing water with soap and seek medical

advice if redness occurs.

Emergency measure - Ingestion: Drink water to dilute, do not induce vomiting. Seek  medical

advice.

Fire-fighting measures

Recommended extinguishing agent: Foam, Carbon dioxide, Dry powder and Water.

Product arising from burning: The substance is combustible and will burn if involved in a

fire, evolving noxious fumes (eg carbon, nitrogen and

phosphorus oxides). However, there is no experimental

evidence to support the anticipated combustion products.

Product determined by test: N

Protective equipment: Full protective clothing and a self-contained breathing

apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vacinity.

Wear appropriate personal protective equipment conforming to

the relevant national or international standards. Absorb

spillages onto a suitable inert material (eg sand or soil).

Carefully transfer the spillage to waste containers, or use

a sealed industrial vacuum machine. Containers filled with

waste material must be labelled in the same way as the

original containers.

Clean the spillage area with water and detergent.

Dispose of waste material in accordance with local

regulations.

Handling and storage

Handling: The tablets containing the substance should be stored,

handled and used in conditions of good industrial hygiene

and in conformity with any local regulations in order to

avoid exposure.

Engineering controls are necessary to reduce exposure to the

substance.

When exposure cannot be prevented or adequately controlled

appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate

international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to standard EN166

When necessary appropriate respiritory protection should be

used. For example, a dust mask conforming to EN149 FFP1.

The standards mentioned above should be regarded as a

minimum.

Storage: Store in a dry well-ventilated area, away from bright light.

Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: Packaged in polyethylene bags containing 8 to 16 kg.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: None
Transport: None
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: Not anticipated because the substance is supplied as a

component of a compact tablet.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery from minor spillages or accidental discharge is not

economically or technically feasible, and as such, waste

material should be disposed of by the appropriate methods.

Large spillages are not anticipated as the substance is only

imported as a component of a preparation, contained within

a highly compacted tablets, in the EU.

Industry - Possibility of neutralisation: No chemical treatment is praticable to neutralize the

hazardous properties.

Industry - Possibility of destruction: controlled discharge: Contaminated containers, spillages of material and transfer

molded electronic devices may be disposed of by landfill at

an authorised tip in accordance with local regulations.

Industry - Possibility of destruction - incineration: Contaminated items containing the substance can be disposed

of by incineration by burning under controlled conditions at

a licensed waste treatment processor in accordance with

local regulations. Stack gases should be scrubbed, because

noxious gases (e.g. Carbon and Phosphorus oxides) could be

formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to

the sewage system or the aqueous environment. During the use

as a curing accelerator for epoxy molding compounds, the

amount of the substance contained in the preparation is

small, and any waste from the process is cured before

release to the environment. Therefore exposure is

anticipated to be negligible.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: Not applicable.