[No public or meaningful name is available]

Guidance on Safe Use

First-aid measures

Emergency measure - Inhalation: Moved the exposed person to fresh air at once. Rinse nose

and mouth with water. Get medical attention if any

discomfort continues.

Emergency measure - Eyes: Immediately flush with plenty of water for up to 15 minutes.

Remove any contact lenses and open eyes wide appart. Get

medical attention if any discomfort continues.

Emergency measure - Skin: Remove affected person from source of contamination. Remove

contaminated clothes and rinse skin thoroughly with water.

Get medical attention if any discomfort continues.

Emergency measure - Ingestion: Promptly get affected person to drink large volumes of water

to dilute the swallowed chemical. Rinse nose, mouth and

throat with water. Get medical attention if any discomfort

continues.

Fire-fighting measures

Recommended extinguishing agent: Appropriate extinguishing media would include water, dry

chemical, foam and carbon dioxide.

Product arising from burning: The substance is combustible and will burn if involved in

a fire, evolving noxious fumes (eg carbon oxides and sulphur

and sodium containing compounds).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing

apparatus must be worn.

Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Personal Precautions:

Wear protective clothing. Avoid contact with eyes. Avoid

inhalation of dust. In case of inadequate ventilation, use

respiratory protection.

Environmental Precautions:

Do not allow to enter drains, sewers or watercourses. Avoid

release to the environment.

Spill Clean Up Methods:

Wear necessary protective equipment. Avoid generation and

spreading of dust. Collect powder using special dust vacuum

cleaner with particle filter or carefully sweep into a

closed container. Collect spillage in containers, seal

securely and deliver for disposal according to local

regulations.

Handling and storage

Handling: The substance should be stored, handled and used under

conditions of good industrial hygiene and in conformity with

any local regulations in order to avoid exposure.

Engineering controls are necessary to reduce exposure to the

substance.

When exposure cannot be prevented or adequately controlled

appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate

international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical protective clothing to Standard EN368

Eye protection to Standard EN166.

Furthermore, when respiratory protective equipment has to be

used, it must be capable of adequately controlling

exposure, be suitable for the purpose, and conform to the

appropriate international or national standards, such as a

dust mask conforming to EN149 FFP1.

These measures should be regarded as a minimum.

Storage: Store in tightly closed original container in a cool, dry,

well-ventilated area. Keep separate from food, feedstuffs,

fertilisers and other sensitive material.

Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: The commercial substance is packaged in 25 kg polypropylene

containers or 25 kg poly-lined steel drums.

The blended substance is packaged in 25 litre polypropylene

containers, or if larger pack sizes are required, 200 litre

polypropylene drums unless other ingredients in the blend

dictate that other packaging is required.

Transport information

Shipping

SpecialProvisions

Shipping

Remarks

Marine transport (UN RTDG/IMDG)

Shipping

Remarks

Air transport (UN RTDG/ICAO/IATA)

Shipping

Special provisions / remarks

Remarks:

Transport code: None.
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.

SpecialProvisions

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None which is hazardous.

Dust explosion: Like most organic compounds, this substance is combustible

and may form a dust explosion if widely dispersed in air.

However, as it is manufactured as an aqueous preparation,

this is not applicable.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from

minor spillages or accidental discharge is not economically

or technically feasible, and such waste material will be

disposed of by incineration or landfill. In principle, it

may be possible to recover larger spillages of

uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: Not applicable.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed

with inert material (e.g. sand or soil) may be disposed of

by landfill at an authorised tip in accordance with local

regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning

under controlled conditions at a licensed waste treatment

processor in accordance with local regulations. Stack gases

should be scrubbed, because noxious fumes (e.g. carbon

oxides and sulphur and sodium containing compounds) could be

formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly

tothe sewage system or the aqueous environment.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: None.