Registration Dossier

Administrative data

First-aid measures

General advice:
Remove contaminated clothing.

If inhaled:
Take the person into the fresh air and keep him warm, let him rest; if there is difficulty in breathing, medical advice is required.

In case of skin contact:
In case of skin contact wash affected areas thoroughly with soap and plenty of water. Consult a doctor in the event of a skin reaction.

In case of eye contact:
Hold the eyes open and rinse with preferably lukewarm water for a sufficiently long period of time (at least 10 minutes). Contact an ophthalmologist.

If swallowed:
DO NOT induce the patient to vomit, medical advice is required.

Fire-fighting measures

Suitable extinguishing media:
Carbon dioxide (CO2), Foam, extinguishing powder, in cases of larger fires, water spray should be used.

Unsuitable extinguishing media:
High volume water jet

Special hazards arising from the substance or mixture:
Burning releases carbon monoxide, carbon dioxide, oxides of nitrogen and traces of hydrogen cyanide. In the event of fire and/or explosion do not breathe fumes.

Advice for fire-fighters:
Firemen must wear self-contained breathing apparatus.

Do not allow contaminated extinguishing water to enter the soil, ground-water or surface waters.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Put on protective equipment. Ensure adequate ventilation/exhaust extraction. Keep unauthorized persons away.

Environment related measures:
Do not allow to escape into waterways, wastewater or soil.

Methods and material for containment and cleaning up:
Take up with absorbent for chemicals or, if necessary with dry sand and store in closed containers.

Handling and storage

When handling observe the usual precautionary measures for chemicals. Avoid contact with the skin and the eyes.

In all workplaces or parts of the plant where high concentrations of aerosols and/or vapours may be generated (e.g. during pressure release, mold venting or when cleaning mixing heads with an air blast), appropriately located exhaust ventilation must be provided in such a way that the WEL is not exceeded. The air should be drawn away from the personnel handling the product. The efficiency of the exhaust equipment should be periodically checked.

Precautions should generally be taken against electrostatic charges according to the equipment used and the way the product is handled and packaged.

Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at the end of workday. Keep working clothes separately. Change contaminated or soaked clothing.

Conditions for safe storage, including any incompatibilities:
Keep container tightly closed and dry.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Respiratory protection:
Unless the product is entirely enclosed, do not handle it until you have studied the respiratory precautions issued by the appropriate authority or accident prevention association. If vapours form, respirators must be used. Put on full-mask respirator with filter type ABEK.

Hand protection:
Conditionally suitable materials for protective gloves; EN 374-3:
Nitrile rubber - NBR (>= 0.35 mm)
Breakthrough time not tested; dispose of immediately after contamination.

Eye protection:
Wear eye/face protection.

Skin and body protection:
Wear suitable protective clothing.

Stability and reactivity

Possibility of hazardous reactions:
No hazardous reactions when used as directed.

Hazardous decomposition products:
No hazardous decomposition products when stored and handled correctly.

Disposal considerations

Dispose in accordance with applicable international, national and local laws, ordinances and statutes. For disposal within the EC, the appropriate code according to the European Waste Catalogue (EWC) should be used.

Waste treatment methods
After containers have been emptied as thoroughly as possible (e.g. by pouring, scraping or draining until "drip-dry"), they can be sent to an appropriate collection point set up within the framework of the existing take-back scheme of the chemical industry. Containers must be recycled in compliance with national legislation and environmental regulations.

None disposal into waste water.