acetalization product beween glucose and 12-hydroxystearyl alcohol

Guidance on Safe Use

First-aid measures

Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower

eyelids. Check for and remove any contact lenses. Get medical attention if irritation

occurs.

Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing.

Get medical attention if symptoms occur.

Skin contact: Flush contaminated skin with plenty of water. Remove contaminated clothing and

shoes. Get medical attention if symptoms occur.

Ingestion: Wash out mouth with water. Remove victim to fresh air and keep at rest in a position

comfortable for breathing. If material has been swallowed and the exposed person is

conscious, give small quantities of water to drink. Do not induce vomiting unless

directed to do so by medical personnel. Get medical attention if symptoms occur.

Protection of first aiders: No action shall be taken involving any personal risk or without suitable training.

Fire-fighting measures

suitable extinguishing media: Use an extinguishing agent suitable for the surrounding fire.

Unsuitable extinguishing media: none known

hazard from the substance or mixture: No specific fire or explosion hazard.

hazardous thermal decomposition products: Decomposition products may include the following materials:

carbon dioxide

carbon monoxide

Special protective actions for fire-fighters: Promptly isolate the scene by removing all persons from the vicinity of the incident if

there is a fire. No action shall be taken involving any personal risk or without suitable

training.

special protective equipment for fire-fighters: Fire-fighters should wear appropriate protective equipment and self-contained

breathing apparatus (SCBA) with a full face-piece operated in positive pressure

mode. Clothing for fire-fighters (including helmets, protective boots and gloves)

conforming to European standard EN 469 will provide a basic level of protection for

chemical incidents.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

for non-emergency personel: No action shall be taken involving any personal risk or without suitable training.

Evacuate surrounding areas. Keep unnecessary and unprotected personnel from

entering. Do not touch or walk through spilt material. Put on appropriate personal

protective equipment.

for emergency responders: If specialised clothing is required to deal with the spillage, take note of any information

in Section 8 on suitable and unsuitable materials. See also the information in "For

non-emergency personnel".

environmental precautions: Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains

and sewers. Inform the relevant authorities if the product has caused environmental

pollution (sewers, waterways, soil or air).

Methods and materials for containment and cleaning up

small spill: Move containers from spill area. Vacuum or sweep up material and place in a

designated, labelled waste container. Dispose of via a licensed waste disposal

contractor.

large spill: Move containers from spill area. Prevent entry into sewers, water courses,

basements or confined areas. Vacuum or sweep up material and place in a

designated, labelled waste container. Dispose of via a licensed waste disposal

contractor. Note: see section 1 for emergency contact information and section 13 for

waste disposal.

Handling and storage

Precautions for safe handling

Protectives measures: Put on appropriate personal protective equipment

advice on general ocupational hygiene: Eating, drinking and smoking should be prohibited in areas where this material is

handled, stored and processed. Workers should wash hands and face before eating,

drinking and smoking. Remove contaminated clothing and protective equipment

before entering eating areas. See also Section 8 for additional information on

hygiene measures.

conditions for safe storage, including any incompatibilities: Store in accordance with local regulations. Store in original container protected from

direct sunlight in a dry, cool and well-ventilated area, away from incompatible

materials (see section 10) and food and drink. Keep container tightly closed and

sealed until ready for use. Containers that have been opened must be carefully

resealed and kept upright to prevent leakage. Do not store in unlabelled containers.

Use appropriate containment to avoid environmental contamination.

STORE UNDER COVER. Keep away from heat and direct sunlight.

 

Transport information

Shipping

SpecialProvisions

Shipping

Remarks

Marine transport (UN RTDG/IMDG)

Shipping

Remarks

Shipping

Remarks

SpecialProvisions

Exposure controls / personal protection

Appropriate engineering controls: No special ventilation requirements. Good general ventilation should be sufficient to

control worker exposure to airborne contaminants. If this product contains

ingredients with exposure limits, use process enclosures, local exhaust ventilation or

other engineering controls to keep worker exposure below any recommended or

statutory limits.

hygiene measures: Wash hands, forearms and face thoroughly after handling chemical products, before

eating, smoking and using the lavatory and at the end of the working period.

Appropriate techniques should be used to remove potentially contaminated clothing.

Wash contaminated clothing before reusing. Ensure that eyewash stations and

safety showers are close to the workstation location.

Individual protection

eye/face protection: Safety eyewear complying with an approved standard should be used when a risk

assessment indicates this is necessary to avoid exposure to liquid splashes, mists,

gases or dusts.

Hand protection: Chemical-resistant, impervious gloves complying with an approved standard should

be worn at all times when handling chemical products if a risk assessment indicates

this is necessary.

body protection: Personal protective equipment for the body should be selected based on the task

being performed and the risks involved and should be approved by a specialist

before handling this product.

other skin protection: Appropriate footwear and any additional skin protection measures should be selected

based on the task being performed and the risks involved and should be approved by

a specialist before handling this product.

Respiratory protection: Use a properly fitted, air-purifying or air-fed respirator complying with an approved

standard if a risk assessment indicates this is necessary. Respirator selection must

be based on known or anticipated exposure levels, the hazards of the product and

the safe working limits of the selected respirator.

Stability and reactivity

Reactivity : No specific test data related to reactivity available for this product or its ingredients.

Chemical stability: The product is stable.

possibility of hazardous reactions: Under normal conditions of storage and use, hazardous reactions will not occur.

hazardous decomposition product: Under normal conditions of storage and use, hazardous decomposition products

should not be produced.

Disposal considerations

Methods of disposal (product): The generation of waste should be avoided or minimised wherever possible.

Significant quantities of waste product residues should not be disposed of via the foul

sewer but processed in a suitable effluent treatment plant. Dispose of surplus and

non-recyclable products via a licensed waste disposal contractor. Disposal of this

product, solutions and any by-products should at all times comply with the

requirements of environmental protection and waste disposal legislation and any

regional local authority requirements.

methods of disposal (packaginig): The generation of waste should be avoided or minimised wherever possible. Waste

packaging should be recycled. Incineration or landfill should only be considered when

recycling is not feasible.