Registration Dossier

Administrative data

First-aid measures

Eye contact:
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Continue to rinse for at least 10 minutes. Get medical attention.

Inhalation:
Get medical attention immediately. Call a poison center or physician. Remove
victim to fresh air and keep at rest in a position comfortable for breathing. If it is
suspected that fumes are still present, the rescuer should wear an appropriate mask
or self-contained breathing apparatus. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
It may be dangerous to the person providing aid to give mouth-to-mouth
resuscitation. If unconscious, place in recovery position and get medical attention
immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie,
belt or waistband. In the event of any complaints or symptoms, avoid further
exposure.

Skin Contact:
Wash with plenty of soap and water. Remove contaminated clothing and shoes.
Wash contaminated clothing thoroughly with water before removing it, or wear
gloves. Continue to rinse for at least 10 minutes. Get medical attention. In the
event of any complaints or symptoms, avoid further exposure. Wash clothing
before reuse. Clean shoes thoroughly before reuse.

Ingestion:
Wash out mouth with water. Remove dentures if any. Remove victim to fresh air
and keep at rest in a position comfortable for breathing. If material has been
swallowed and the exposed person is conscious, give small quantities of water to
drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not
induce vomiting unless directed to do so by medical personnel. If vomiting occurs,
the head should be kept low so that vomit does not enter the lungs. Get medical
attention. Never give anything by mouth to an unconscious person. If unconscious,
place in recovery position and get medical attention immediately. Maintain an open
airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Protection of first aiders:
No action shall be taken involving any personal risk or without suitable training. If it
is suspected that fumes are still present, the rescuer should wear an appropriate
mask or self-contained breathing apparatus. It may be dangerous to the person
providing aid to give mouth-to-mouth resuscitation. Wash contaminated clothing
thoroughly with water before removing it, or wear gloves.

Fire-fighting measures

Suitable extinguishing media:
Use an extinguishing agent suitable for the surrounding fire.

Unsuitable extinguishing media: None known

Special hazards arising from the substance or mixture
Hazards from the substance or mixture:
This material is toxic to aquatic life with long lasting effects. Fire water
contaminated with this material must be contained and prevented from being
discharged to any waterway, sewer or drain.

Hazardous combustion products:
Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
metal oxide/oxides

Special precautions for fire-fighters:
Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without
suitable training.

Special protective equipment for fire-fighters:
Fire-fighters should wear appropriate protective equipment and self-contained
breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode. Clothing for fire-fighters (including helmets, protective boots and gloves)
conforming to European standard EN 469 will provide a basic level of protection for
chemical incidents.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency personnel:
No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Provide adequate ventilation.
Wear appropriate respirator when ventilation is inadequate. Put on appropriate
personal protective equipment.

Environmental precautions:
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air). Water polluting material. May be harmful
to the environment if released in large quantities. Collect spillage.

Methods and materials for containment and cleaning up
Small spill:
Move containers from spill area. Avoid dust generation. Do not dry sweep.
Vacuum dust with equipment fitted with a HEPA filter and place in a closed, labeled
waste container. Place spilled material in a designated, labeled waste container.
Dispose of via a licensed waste disposal contractor.

Large spill:
Move containers from spill area. Approach the release from upwind. Prevent entry
into sewers, water courses, basements or confined areas. Avoid dust generation.
Do not dry sweep. Vacuum dust with equipment fitted with a HEPA filter and place
in a closed, labeled waste container. Dispose of via a licensed waste disposal
contractor.

Handling and storage

Precautions for safe handling
Protective measures:
Put on appropriate personal protective equipment.
Persons with a history of skin sensitisation problems or asthma, allergies or chronic
or recurrent respiratory disease should not be employed in any process in which
this product is used.
Avoid exposure - obtain special instructions before use. Avoid exposure
during pregnancy. Do not handle until all safety precautions have been read and
understood. Do not get in eyes or on skin or clothing. Do not ingest. Avoid release
to the environment. Use only with adequate ventilation. Wear appropriate
respirator when ventilation is inadequate. Keep in the original container or an
approved alternative made from a compatible material, kept tightly closed when not
in use. Empty containers retain product residue and can be hazardous. Do not
reuse container.

Conditions for safe storage, including any incompatibilities:
Store in accordance with local regulations. Store in a dry place. Keep only in the
original container. Keep container tightly closed and sealed until ready for use.
Containers that have been opened must be carefully resealed and kept upright to
prevent leakage. Do not store in unlabelled containers. Use appropriate
containment to avoid environmental contamination. Store away from incompatible
materials

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Disposal considerations