Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

GENERAL INFORMATION

Get medical attention.

NOTES TO THE PHYSICIAN

No recommendation given, but first aid may still be required in the case of accidental exposure, inhalation or ingestion of this chemical. If in doubt, get medical attention promptly.

INHALATION

Move into fresh air and keep at rest. Get medical attention if any discomfort continues.

INGESTION

Rinse mouth thoroughly. Do not induce vomiting. Get medical attention.

SKIN CONTACT

Immediately wash with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists seek medical attention.

EYE CONTACT

Immediately irrigate the eyes with copious amounts of water for at least 15 minutes. Ensure adequate flushing of the eyes by separating the eyelids with fingers. If irritation persists seek medical attention.

Fire-fighting measures

EXTINGUISHING MEDIA

Water spray, foam, dry powder or carbon dioxide.

SPECIAL FIRE FIGHTING PROCEDURES

During all fire fighting activities, wear appropriate protective equipment, including self-contained breathing apparatus.

UNUSUAL FIRE & EXPLOSION HAZARDS

No unusual fire or explosion hazards noted.

SPECIFIC HAZARDS

Fire or heating may create toxic fumes, such as carbon monoxide and carbon dioxide.

PROTECTIVE MEASURES IN FIRE

Self contained breathing apparatus and full protective clothing must be worn in case of fire.

Accidental release measures

PERSONAL PRECAUTIONS

Follow precautions for safe handling described in this safety data sheet.

ENVIRONMENTAL PRECAUTIONS

Avoid release to the environment.

SPILL CLEAN UP METHODS

Do not allow material to enter drain or watercourse. Mix with sand or similar inert absorbant material, sweep up and keep in a closed container for disposal.

Arrange disposal as special waste by a licensed disposal company, in consultation with local waste disposal authority and in accordance with national and regional regulations.

Handling and storage

USAGE PRECAUTIONS

Read and follow manufacturer's recommendations as follows:

USAGE DESCRIPTION

The substance will only be used by trained personnel. Measures are in place to minimise workplace exposure levels. These include the use of personal protective equipment and engineering controls, such as local exhaust ventilation.

STORAGE PRECAUTIONS

Store in closed containers in a dry place away from sources of heat.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

EXPOSURE LIMIT VALUES

Not established for this product.

OCCUPATIONAL EXPOSURE CONTROLS

Use engineering controls to reduce air contamination to permissible exposure level.

ENGINEERING MEASURES

Local exhaust ventilation extraction should be present during charging and sampling should be carried out in a ventilated, self-contained cabinet.

RESPIRATORY EQUIPMENT

Wear air supplied respiratory protection.

HAND PROTECTION

PVC gloves are recommended.

EYE PROTECTION

Wear approved safety goggles.

HYGIENE MEASURES

No specific hygiene procedures noted, but good personal hygiene practices are always advisable, especially when working with chemicals.

SKIN PROTECTION

Wear appropriate protective clothing to prevent skin contact including disposable coverall, boots and hard hat.

ENVIRONMENTAL EXPOSURE CONTROLS

Site procedures for material handling and storage limit environmental exposure.

Stability and reactivity

STABILITY

Stable at normal temperature

CONDITIONS TO AVOID

Avoid contact with strong oxidising age

HAZARDO

Unknown.

MATERIALS TO AVOID

Strong oxidising substances and bases

Disposal considerations

GENERAL INFORMATION

When handling waste, consideration should be made to the safety precautions applying to handling of the product.

DISPOSAL METHODS

Dispose of waste in accordance with all applicable laws and regulations.