Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Remove from danger zone. Obtain immediate medical assistance.
Skin Contact
Remove contaminated clothing. Rinse contaminated skin immediately with plenty of water and seek medical advice.
Eye Contact
Immediately rinse eyes thoroughly with running water as long as possible (approx. 15 min).
Take injured quickly to factory medical center or call an ambulance (code word: eye accident).
Do not induce vomiting. In case of consciousness wash mouth with water and let drink some of water. Seek medical advice. Keep patient at rest.
Most important symptoms and effects, both acute and delayed
Target organ
Cardiovascular system
Indication of any immediate medical attention and special treatment needed
Notes to Physician
Treat symptomatically and supportively.
Primary route of exposure

Fire-fighting measures

Extinguishing media
Suitable Extinguishing Media
Water spray or fog, foam, dry chemical powder, CO2, dry sand
Unsuitable Extinguishing Media
High volume water jet
Special hazards arising from the substance or mixture
Dangerous Combustion Products
carbon oxides
nitrogen oxides
calcium oxide
Advice for firefighters
Protective equipment for firefighters
Wear self-contained breathing apparatus and fire protective suite.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Personal precautions Wear chemical resistant protective suite. Minimize number of personnel in risk area. Keep
away unprotected persons. Wear chemical-proof clothes and masks while undressing
contaminated persons or cleaning contaminated equipment.
Environmental precautions
Firefighting water may not spill into open rivers and ponds. Collect spilled material by all
available means. Do not release into the environment.
Methods and material for containment and cleaning up
Methods for cleaning Moisten spilled material with water (in order to avoid dust formation), cover with wet sand or wetted binder, then take up. Wash away remains with plenty of water. Put into lead-sealable and labelled drums.
Accidental Release
Avoid breathing in dust.
All equipment and protective garments must be either decontaminated or properly contained for disposal before leaving the area.

Handling and storage

Precautions for safe handling
Storage and Handling Precautions
Open handling without suitable personal protective equipment must be avoided. Keep container tightly closed in a dry, cool and well-ventilated place. Ensure efficient exhaust ventilation when using this product Avoid formation of dust.

Conditions for safe storage, including any incompatibilities
Preventive Precautions (fire/explosion)
Take precautionary measures against static discharges. Avoid formation of dust. Observe the usual precautionary measures required for chemicals with dust explosive properties (Observe national regulations).

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Industrial Hygiene
The personal protective measure may be adapted appropriately when working in closed systems or under laboratory conditions.
Regular cleaning of equipment, work area and clothing.
Open handling at operator intervention points with local exhaust ventilation (e.g. downflow booths).
Internal working procedures available to personnel covering personal hygiene, standard
Personnel instructed and trained, regular refresher training established.
Double wardrobe must be available.

Open Handling
Respiration : Full face mask (EN136)
Filter : P3 (EN143)
Eye : Yes, by face mask
Hand : Normal length chemical-mechanical-resistant gloves (EN374/EN388)
worn over disposable gloves
Glove Material : Nitrile
Breakthrough time: 240 min
Thickness: 0.4 mm
Additional protection : Disposable dust-proof suit (EN465, type 4) worn over long underwear
Disposable boot covers, conductive

Stability and reactivity

Reaction products with water
None known
Chemical stability
Hydrolysis : no data available
Possibility of hazardous reactions
Materials to avoid None known
Conditions to avoid
Stable at normal conditions
Hazardous decomposition products
carbon oxides
nitrogen oxides

Disposal considerations

Waste treatment methods
Disposal Requirements
Fill into suitable waste receptacles, seal and label them properly.
Incineration in an approved, controlled furnace with combustion gas scrubbing and emission gas control.
Container Disposal
For disposal local regulation is binding.