Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 613-645-3 | CAS number: 646505-36-4
Guidance on Safe Use
Administrative data
First-aid measures
General advice:
Take off all contaminated clothing immediately.
If inhaled:
Take the person into the fresh air and keep him warm, let him rest; if there is difficulty in breathing, medical advice is required.
In case of skin contact:
In case of skin contact wash affected areas thoroughly with soap and plenty of water.
Consult a doctor in the event of a skin reaction.
In case of eye contact:
Hold the eyes open and rinse with preferably lukewarm water for a sufficiently long period of time (at least 10 minutes).
Contact an ophthalmologist.
If swallowed:
If swallowed, rinse mouth with water (only if the person is conscious). DO NOT induce the patient to vomit, medical advice is required.
Fire-fighting measures
Suitable extinguishing media:
Carbon dioxide (CO2), Foam, extinguishing powder, in cases of larger fires, water spray should be used.
Unsuitable extinguishing media:
High volume water jet.
Special hazards arising from the substance or mixture:
Burning releases carbon monoxide, carbon dioxide, oxides of nitrogen and traces of hydrogen cyanide.
In the event of fire and/or explosion do not breathe fumes.
Cool endangered vessels and containers with sprayed water.
Heating raises pressure with consequent risk of bursting and explosion.
Advice for fire-fighters:
During fire-fighting respirator with independent air-supply and airtight garment is required.
Do not allow contaminated extinguishing water to enter the soil, ground-water or surface waters.
Accidental release measures
Personal precautions, protective equipment and emergency procedures:
Put on protective equipment.
Respiratory protection:
Put on full-mask respirator with filter type ABEK.
Hand protection:
Conditionally suitable materials for protective gloves; EN 374-3:
Nitrile rubber - NBR (>= 0.35 mm). Breakthrough time not tested; dispose of immediately after contamination.
Eye protection:
Wear eye/face protection.
Skin and body protection:
Wear suitable protective clothing.
Keep away from sources of ignition.
Ensure adequate ventilation/exhaust extraction.
Keep unauthorized persons away.
Environment related measures:
Do not allow to escape into waterways, wastewater or soil.
Methods and material for containment and cleaning up: Contain liquid and pump it away.
Take up with absorbent for chemicals or, if necessary with dry sand and store in closed containers.
Disposal considerations:
Dispose in accordance with applicable international, national and local laws, ordinances and statutes.
For disposal within the EC, the appropriate code according to the European Waste Catalogue (EWC) should be used.
Handling and storage
Precautions for safe handling:
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin and eyes.
In all workplaces or parts of the plant where high concentrations of aerosols and/or vapors may be generated (e.g. during pressure release, mold venting or when cleaning mixing heads with an air blast), appropriately located exhaust ventilation must be provided in such a way that the WEL
is not exceeded. The air should be drawn away from the personnel handling the product The efficiency of the exhaust equipment should be periodically checked.
Precautions should generally be taken against electrostatic charges according to the equipment used and the way the product is handled and
packaged.
Explosion protection required. When setting up and operating electrical equipment, it is essential to observe the "German regulation on Electrical Equipment in Hazardous Locations", (cf. ZH 1/309, which corresponds to ElexV), VDE 0165 and ZH1/10 "Guidelines on avoidance of risks
from explosive mixtures with air. Ventilation systems must be installed to prevent the formation of
explosive vapor/air mixtures.
Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at the end of workday. Keep working clothes separately.
Change contaminated or soaked clothing immediately.
Conditions for safe storage, including any incompatibilities:
Keep container tightly closed and dry.
Storage temperature regarding personal safety: max. 50 °C.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- not required
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Disposal considerations
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
