Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

1 Description of first aid measures

· General information:

 Take affected persons out of danger area and lay down.


· After inhalation:

 Supply fresh air; consult doctor in case of complaints.


· After skin contact:

 Immediately wash with water and soap and rinse thoroughly.

 If skin irritation continues, consult a doctor.


· After eye contact:

 Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

 Remove contact lenses, if present and easy to do. Continue rinsing.


· After swallowing:

 Rinse out mouth and then drink plenty of water.

 If symptoms persist consult doctor.

2 Most important symptoms and effects, both acute and delayed

 No further relevant information available.

3 Indication of any immediate medical attention and special treatment needed

 No further relevant information available.

Fire-fighting measures

1 Extinguishing media

· Suitable extinguishing agents:

 CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

 Use fire extinguishing methods suitable to surrounding conditions.

· For safety reasons unsuitable extinguishing agents:

 Water with full jet

2 Special hazards arising from the substance or mixture

 Formation of toxic gases is possible during heating or in case of fire.

 In case of fire, the following can be released:

 Carbon monoxide

 Carbon dioxide

 Nitrogen oxides (NOx)

3 Advice for firefighters

· Protective equipment:

 Wear self-contained respiratory protective device.

· Additional information

 Cool endangered receptacles with water spray.

 Collect contaminated fire fighting water separately. It must not enter the sewage system.

Accidental release measures

1 Personal precautions, protective equipment and emergency procedures

 Ensure adequate ventilation.

 Wear protective clothing.

 Avoid formation of dust.

 Keep away from ignition sources.

2 Environmental precautions:

 Do not allow to enter sewers/ surface or ground water.

3 Methods and material for containment and cleaning up:

 Pick up mechanically.

 Dispose of the material collected according to regulations.

Handling and storage

1 Precautions for safe handling

 Prevent formation of dust.

 Any unavoidable deposit of dust must be regularly removed.

 Ensure good ventilation/exhaustion at the workplace.

· Information about fire and explosion protection:

 Dust can combine with air to form an explosive mixture.

 Keep ignition sources away - Do not smoke.

 Protect against electrostatic charges.

2 Conditions for safe storage, including any incompatibilities

· Requirements to be met by storerooms and receptacles:

 Store only in the original receptacle.

· Information about storage in one common storage facility:

 Store away from oxidizing agents.

· Further information about storage conditions:

 Store in dry conditions.

3 Specific end use(s)

 No further relevant information available.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shipping information
Proper shipping name and description:
Chemical name:
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Shipping information
Proper shipping name and description:
Chemical name:
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Not dangerous according to the above specifications.

Exposure controls / personal protection

1 Control parameters

· Ingredients with limit values that require monitoring at the workplace:

 Not required.

2 Exposure controls

· Personal protective equipment:

· General protective and hygienic measures:

 Do not eat, drink, smoke or sniff while working.

 Keep away from foodstuffs, beverages and feed.

 The usual precautionary measures are to be adhered to when handling chemicals.

· Respiratory protection:

 Not necessary if room is well-ventilated.

 Use suitable respiratory protective device in case of insufficient ventilation.

 Filter P1

· Protection of hands:

 The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.

 Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.

· Material of gloves

 Butyl rubber, BR

 Nitrile rubber, NBR

 PVC gloves

· Penetration time of glove material

 The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

· Eye protection:

 Safety glasses

· Body protection:

 Protective work clothing

Stability and reactivity

1 Reactivity


2 Chemical stability

 No decomposition if used and stored according to specifications.


· Thermal decomposition / conditions to be avoided:

 No decomposition if used according to specifications.

3 Possibility of hazardous reactions

 No dangerous reactions known.

4 Conditions to avoid

 No further relevant information available.


5 Incompatible materials:

 Strong oxidizing agents


6 Hazardous decomposition products:

 No dangerous decomposition products known.

Disposal considerations

1 Waste treatment methods

· Recommendation:

 Must be specially treated adhering to official regulations.


· Uncleaned packaging

· Recommendation:

 Disposal must be made according to official regulations.