Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

Endpoint:
skin irritation: in vitro / ex vivo
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2012-08-22 to 2012-10-18
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2012
Report date:
2012

Materials and methods

Test guidelineopen allclose all
Qualifier:
according to guideline
Guideline:
OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
Version / remarks:
22 July 2010
Deviations:
no
Qualifier:
according to guideline
Guideline:
EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)
Version / remarks:
06 July 2012
GLP compliance:
yes (incl. QA statement)

Test material

Constituent 1
Chemical structure
Reference substance name:
Titanium carbide
EC Number:
235-120-4
EC Name:
Titanium carbide
Cas Number:
12070-08-5
Molecular formula:
CTi
IUPAC Name:
methanidylidynetitaniumylium
Test material form:
solid: particulate/powder
Remarks:
migrated information: powder
Details on test material:
- Name of test material (as cited in study report): Titanium carbide
- Substance type: pure active substance
- Physical state: solid
- Batch No.: 82496
- Storage condition of test material: room temperature
Specific details on test material used for the study:
SOURCE OF TEST MATERIAL
- batch number of test material: 82496
- Purity: ≥99%

TREATMENT OF TEST MATERIAL PRIOR TO TESTING
- 5 µl distilled water were aplied by a pipette to the epidermal surface in order to improve further contact between the powder and the epidermis. The water was gently spread with the pipette. Afterwards, approximately 10 mg (26.3 mg/cm³) of the powder were applied to the epidermis surface.

In vitro test system

Test system:
human skin model
Source species:
human
Cell type:
non-transformed keratinocytes
Justification for test system used:
This test uses the EPISKIN-SM(TM) reconstructed human epidermis model (Skin Ethic) which consists of human keratinocytes (NHEK) and therefore represents in vitro the target organ of the species of interest and closely mimics the biochemical and physiological properties of the upper parts of the human skin, i.e. the epidermis.
Vehicle:
water
Details on test system:
RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: EPISKIN-SM(TM)
- Tissue batch number(s): 12-EKIN-030
- Production date: August 21, 2012
- Shipping date: not specified
- Delivery date: not specified
- Date of initiation of testing: 22 August 2012

TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: room temperature
- Temperature of post-treatment incubation (if applicable): 37 ± 1 °C

REMOVAL OF TEST MATERIAL AND CONTROLS
- Volume and number of washing steps: not specified
- Observable damage in the tissue due to washing: not specified
- Modifications to validated SOP: not specified

MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE
- MTT concentration: final concentration 0.3 mg/ml
- Incubation time: 3h ± 5 min
- Wavelength: 550 nm

FUNCTIONAL MODEL CONDITIONS WITH REFERENCE TO HISTORICAL DATA
- Barrier function: exceeded specifications
- Morphology: Well-differentiated epidermis consisting of a basal layer, several spinous and granular layers and a thick stratum corneum. Exceeded specifications.

NUMBER OF REPLICATE TISSUES: The test was performed on a total of 3 tissues per dose group.

CONTROL TISSUES USED IN CASE OF MTT DIRECT INTERFERENCE
- The test item showed no reduction of MTT compared to the solvent and showed no colouring detectable by unaided eye-assessment

NUMBER OF INDEPENDENT TEST SEQUENCES / EXPERIMENTS TO DERIVE FINAL PREDICTION: One

PREDICTION MODEL / DECISION CRITERIA
- The test substance is considered to be irritant to skin if the viability after 15 minutes exposure and 42 hours of post-incubation is less than or equal to 50%. The test substance may be considered non-irritant to skin if the tissue viability after exposure and post-treatment incubation is higher than 50%.
Control samples:
yes, concurrent negative control
yes, concurrent positive control
Amount/concentration applied:
TEST MATERIAL
- Amount(s) applied: 10 mg (26.3 mg/cm²)

VEHICLE
- Amount(s) applied: 5 µl
- Purity: distilled water

NEGATIVE CONTROL
- Amount(s) applied: 10 µl

POSITIVE CONTROL
- Amount(s) applied: 10 µl
- Concentration: 5% SDS
Duration of treatment / exposure:
15 ± 0.5 min
Duration of post-treatment incubation (if applicable):
42 hours
Number of replicates:
3

Test system

Details on study design:
TEST SITE
- Area of exposure: 0.38 cm²
- % coverage: 100 %

REMOVAL OF TEST SUBSTANCE
- Washing (if done): phosphate buffered saline
- Time after start of exposure: 15 ± 0.5 min

PRE-EXPERIMENT
To check the non specific MTT-reducing capability of the test item 10 mg of the test item were mixed per 2 mL MTT medium and incubated for 3 h at 37 ± 1 °C in the dark. If the mixture turns blue/purple, the test item is presumed to have reduced MTT. To check the colouring potential of the test item 10 mg of the test item were mixed per 90 μL Aqua dest. in a transparent recipient for 15 min.

EXPERIMENTAL PROCEDURE
Upon receipt of the EPISKIN-SM, the tissues were transferred into 12-well plates containing 2 mL prewarmed maintenance medium per well. The 12-well plates were incubated in a humidified incubator at 37 ± 1 °C, 5.0% CO2 for at least 24 h.
After this pre-incubation the tissues were treated with each dose group in triplicate, starting with the negative control. Start time was recorded with dosing of the first tissue. Then the tissues were incubated at room temperature for 15 ± 0.5 min. Afterwards, the tissues were washed with PBS to remove any residual test item. Excess PBS was removed by blotting bottom with blotting paper. The inserts were placed in a prepared 12-well plate containing 2 mL prewarmed fresh maintenance medium and post-incubated at 37 ± 1 °C, 5.0% CO2 for 42 ± 1 h.
After this incubation period the plates were placed for 15 ± 2 min. on a plate shaker. Then the inserts were transferred in a prepared 12-well plate containing 2 mL prewarmed MTT medium and further incubated for 3 h ± 5 min. at 37 ± 1 °C, 5.0% CO2.
After the 3 h MTT incubation period the tissues were placed on blotting paper to dry the tissues. Afterwards a total biopsy of the epidermis by using the special biopsy punch was performed and the epidermis was separated from the collagen matrix with the aid of forceps. Both parts (epidermis and collagen matrix) were transferred into suitable tubes and 500 μL of acidic isopropanol were added. Extraction was carried out protected from light over the weekend at 2 - 8°C.
At the end of the formazan extraction period the tubes were mixed by vortexing until solution colour became homogeneous. If any visible cell/tissue fragments were in suspension, the tubes were centrifuged at 500 rpm to eliminate the fragments and avoid further possible interference with the absorbance readings. Per tissue 2 x 200 μL aliquots of the extract were transferred into a 96-well plate and OD was measured at 550 nm without reference wavelength in a plate spectrophotometer.

SCORING SYSTEM:
Irritant potential of the test item was predicted from the relative mean tissue viabilities compared to the negative control tissues concurrently treated with PBS. The test item is considered to be irritant to skin in accordance with regulation EC1272/2008 and UN GHS "Category 2", if the tissue viability after 15 min of exposure and 42 h of post-incubation is less or equal to 50%. The test substance may be considered as non-irritant to skin in accordance with UN GHS "No category" if the tissue viability after exposure and post-treatment incubation is higher than 50%.

Barrier function and morphology were provided by the Rhe model supplier to assure the proper functioning of the tissues.

Results and discussion

In vitro

Results
Irritation / corrosion parameter:
% tissue viability
Run / experiment:
Test item (mean of 3 replicates)
Value:
> 50
Vehicle controls validity:
not applicable
Negative controls validity:
valid
Positive controls validity:
valid
Remarks on result:
other:
Remarks:
Remarks: The results are presented in the table below.

Any other information on results incl. tables

Table 1: Experimental results of the EPISKIN-SM test after application of Titanium carbide powder.

Name

Negative Control

Positive Control

Test Item

Tissue

1

2

3

1

2

3

1

2

3

Mean OD550of 3 replicate tissues (blank-corrected

0.742

0.184

0.740

SD OD550

0.052

0.080

0.077

Relative tissue viabilities (%)

100.2

104.6

95.2

37.6

21.6

15.1

105.8

105.6

87.9

Mean relative tissue viability (%)

100

25

100

SD tissue viability (%)

4.7

11.6

10.3

CV (% viability)

4.7

46.8

10.3

Applicant's summary and conclusion

Interpretation of results:
GHS criteria not met
Conclusions:
Titanium carbide is no irritant in the human skin model EPISKIN-SM.
Executive summary:

In this in vitro dermal irritation study with the three-dimensional human skin model EPISKIN-SM conducted according to OECD TG 439, the irritation potential of Titanium carbide was examined. The test substance (10 mg) was applied topically on the tissue for 15 min, and thereafter the exposed tissue culture was incubated for 42 h. A positive and a negative control were used. The determination of cytotoxic effects was performed with the MTT assay. Irritation potential of the test susbstance was determined based on the cytotoxicity observed (mean tissue viability). All acceptability criteria were fulfilled. The results revealed a mean relative tissue viability higher than 50%, and hence, the test substance is not a skin irritant under the conditions of this test.