Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General advice: No hazards which require special first aid measures.
Skin contact: Wash off with soap and water.
Eye contact: Rinse with plenty of water.
Ingestion: Consult a physician if necessary. Rinse mouth.

Fire-fighting measures

Suitable extinguishing media: Water, Foam, Dry powder, Carbon dioxide (CO2)
Further information: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Accidental release measures

Environmental precautions: Avoid subsoil penetration. Do not flush into surface water or sanitary sewer system.
Methods for cleaning up: Use mechanical handling equipment. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal
binder, sawdust).

Handling and storage

HANDLING
Safe handling advice: No special technical protective measures required.
Advice on protection against fire and explosion: Normal measures for preventive fire protection.
STORAGE
Requirements for storage areas and containers: No special storage conditions required.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all

Additional transport information

Additional transport information
Not dangerous goods

Exposure controls / personal protection

PERSONAL PROTECTIVE EQUIPMENT
Respiratory protection: No personal respiratory protective equipment normally required. In inadequately ventilated areas, where workplace limits are exceeded, where unpleasant odours exist or where aerosols are in use, or smoke and mist occur, use self-contained breathing apparatus or
breathing apparatus with a type A filter or appropriate combined filter (e.g. where aerosols are in use, or smoke and mist occur, A-P2 or ABEK-P2), in compliance with EN 141.
Hand protection The choice of an appropriate glove does not only depend on its material but also on other quality features and is
different from one producer to the other., Please observe the instructions regarding permeability and breakthrough time which are provided by the
supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts,
abrasion, and the contact time., Be aware that in daily use the durability of a chemical resistant protective glove can be notably shorter than the
break through time measured according to EN 374, due to the numerous outside influences (e.g. temperature).
gloves suitable for permanent contact:Material: Nitrile rubber/nitrile latex;Break through time: >= 480 min;Material thickness: 0.35 mm
Material: butyl-rubber;Break through time: >= 480 min;Material thickness: 0.5 mm
Eye protection: Safety glasses
Hygiene measures: General industrial hygiene practice.
Protective measures: No special protective equipment required.

Stability and reactivity

Product: Can be incinerated, when in compliance with local regulations.

Disposal considerations