Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures

General information
Seek medical assistance if discomfort continues

After inhalation
Remove the casualty into fresh air and keep him calm.

After contact with skin
In case of contact with skin, clean with soap and water.

After contact with eyes
Rinse the affected eye with plenty of water, at the same time keep the unaffected eye well
protected.

After ingestion
If swallowed do not induce vomiting, seek medical advice and show safety data sheet or label

Most important symptoms and effects, both acute and delayed

No symptoms known currently
No hazards knwon at this time

Indication of any immediate medical attention and special treatment needed

Treat symptomatically

Fire-fighting measures

Suitable extinguishing media
water spray jet
foam

Extinguishing media that must not be used for safety reasons
Full water jet
carbon dioxide
dry powder

Special hazards from the substance itself, its combustion products or from its vapours
In the event of fire the following can be released:
Nitrous gases (NOx)
Carbon dioxide (CO2)
Carbon monoxide (CO)

Special protective equipment for firefighting
Use self-contained breathing apparatus

Accidental release measures

Personal precautions
Use personal protective clothing.

Environmental precautions
Do not allow entry to drains, water courses or soil

Methods for cleaning up/taking up
Take up mechanically
Avoid dust formation and electrical charging (sparking) because dust explosion might occur.
When picked up, product should be be taken to a suitable and authorized waste disposal site in
accordance with relevant regulations and if necessary after consultation with the waste
disposal operator and/or the competent Authorities

Additional information
Collect spilled product completely.

Handling and storage

Advice on safe handling
When used and handled appropriately no special measures are needed
Avoid dust formation.

Advice on protection against fire and explosion
Take precautionary measures against electrostatic charges - earthing necessary during loading operations.
Keep away from sources of ignition
Dust can form an explosive mixture with air.

Further information on storage conditions
Keep container dry

Transport information

Land transport (ADR/RID)

Shippingopen allclose all
Class:
not restricted
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

Shippingopen allclose all
Class:
not restricted
Remarksopen allclose all

Marine transport (IMDG)

Class:
not restricted
Remarksopen allclose all

Air transport ICAO/IATA

Class:
not restricted
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Occupational exposure controls

General protective measures
Observe the usual precautions for handling chemicals.

Hygiene measures
Wash hands before breaks and after work.
Use barrier skin cream.
Remove soiled or soaked clothing immediately and clean thoroughly before using again.

Respiratory protection : Wear dust mask when handling large quantities

Hand protection : Nitrile rubber gloves.
Minimum breakthrough time (glove): not determined
Minimum thickness (glove): not determined
Observe the information of the glove manufacturers on permeability and breakthrough times and other workplace requirements

Eye protection : safety glasses

Body protection : working clothes

Stability and reactivity

Thermal decomposition : from 341 °C
Method : DTA

Hazardous reactions
When handled and stored appropriately no dangerous reactions are known

Hazardous decomposition products
When handled and stored appropriately, no dangerous decomposition products are known

Materials to avoid
Strong oxidizers

Disposal considerations

Product
Product should be be taken to a suitable and authorized waste disposal site in
accordance with relevant regulations and if necessary after consultation with the waste
disposal operator and/or the competent Authorities

Uncleaned packaging
Packaging that cannot be cleaned should be disposed of as product waste