Registration Dossier

Administrative data

First-aid measures

Description of first aid measures:
In all cases keep the victim at physical and mental rest and warm. In all serious events and always in case of eye contact, seek for medical help.
Inhalation:
Breake the exposure, transfer the victim to the fresh air, apply artificial respiration, if the victim is not breathing. Consult a physician.
Skin contact:
Take off immediately contaminated clothing and flush affected area with plenty of water (preferably lukewarm) and soap.
Eye contact:
Rinse with plenty of water for at least 15 minutes. Move to the physician.
Ingestion:
Rinse the mouth with clean water, make him drink 0,1-0,2 l of water, do not induce vomiting, seek for medical help.

Fire-fighting measures

Suitable extinguishing media:
Water spray, foam, dry chemical or carbon dioxide.
Extinguishing media which shall not be used for safety reasons:
Not known.

Special hazards arising from the substance or mixture:
Development of hazardous gases or vapours possible in the event of fire.
In case of burning, carbon oxides and nitrogen oxides are formed.

Advice for firefighters:
Wear self contained breathing apparatus and clothing protective against chemicals.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.

Environmental precautions:
Keep away from sources of ignition.
Avoid releasing to sewerage system, avoid contamination water sources, waste waters, soil and vegetation.

Methods and material for containment and cleaning up:
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
place in container for disposal according to local regulations. Keep in suitable, closed containers for disposal.

Handling and storage

Precautions for safe handling:
Avoid contact with eyes and skin.
Avoid inhaling of vapour or mist.
Use personal protective equipment.
Do not eat, drink or smoke during the work and observe the personal hygiene principles.
Wash hands with water and soap before breaks and after work.
Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge.
Conditions for safe storage, including any incompatibilities
Store in original tightly closed packings in dry areas protected from direct weather conditions (light, heat, frost, moisture).


This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.

Transport information

Land transport (ADR/RID)

UN number:
2272
Proper shipping name and description:
N-ETHYLANILINE
Chemical name:
N-ETHYLANILINE
Language:
English
Class:
6.1
Packaging group:
III
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
2272
Proper shipping name and description:
N-ETHYLANILINE
Chemical name:
N-ETHYLANILINE
Class:
6.1
Packaging group:
III
Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure reduction (technical measures):
If vapour/mist may be generated, proper ventilation must be provided.

Individual protection measures, such as personal protective equipment:
The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
The resistance of the protective clothing to chemicals should be ascertained with the respective supplier.
Respiratory protection: respirator, type DIN 3181 ABEK
Hand protection: protective gloves,
Eye/face protection: tight protective goggles,
Skin protection: protective clothing, apron, boots, cap.

Environmental exposure reduction:
Uncontrolled escape of substance/formulation into environment is to be avoided.


This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.

Stability and reactivity

Conditions of stability: Stable under ordinary conditions.
Conditions to avoid: Sources of ignition (open flame, sparks, hot surfaces, smoking).
Materials to avoid: Strong oxidants. Strong bases.
Hazardous decomposition products: In case of burning, toxic, irritating fumes may be formed (oxides of carbon, nitrogen).

Disposal considerations

Disposal methods of the substance/preparation: Incinerate in incinerating plant for danger waste in accordance with local environmental regulations.
Disposal methods of the contaminated packaging: Must be disposed of in compliance with the respective national regulations.