Registration Dossier

Diss Factsheets

Physical & Chemical properties

Flammability

Currently viewing:

Administrative data

Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
4.3.2004
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: GLP-Guideline study

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2004
Report date:
2004

Materials and methods

Test guideline
Qualifier:
according to guideline
Guideline:
EU Method A.10 (Flammability (Solids))
Deviations:
no
GLP compliance:
yes

Test material

Constituent 1
Chemical structure
Reference substance name:
(3S,5S)-5-[(1S,3S)-1-azido-3-{[4-methoxy-3-(3-methoxypropoxy)phenyl]methyl}-4-methylpentyl]-3-(propan-2-yl)oxolan-2-one
EC Number:
608-748-5
Cas Number:
324763-46-4
Molecular formula:
C25 H39 N3 O5
IUPAC Name:
(3S,5S)-5-[(1S,3S)-1-azido-3-{[4-methoxy-3-(3-methoxypropoxy)phenyl]methyl}-4-methylpentyl]-3-(propan-2-yl)oxolan-2-one

Results and discussion

Flammable solids
Test procedure:
burning time (test type not further specified)
Remarks:
or specified in description of method (migrated information)
Remarks on result:
other: The test substance does not ignite nor smoulder in the period of 2 minutes.
Pyrophoric solids
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record.
Pyrophoric liquids
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record.

Any other information on results incl. tables

In the preliminary screening test the substance was formed into an unbroken strip about 250 mm long by 20 mm wide by 10 mm high on a non-combustible, non-porous and low heat-conducting base plate. A hot flame from a gas burner (with minimum diameter 5 mm) was applied to one end of the powder train for 2 minutes. The melting of the test substance occurred at the site of burner flame action. But the test substance does not ignite nor smoulder in the period of 2 minutes. After removing the flame the melted substance was gradually cooled down and solidify again.

Applicant's summary and conclusion

Conclusions:
The test substance should not be considered as highly flammable substance.