Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove victim to fresh air. Seek medical attention if
symptoms persist.
Emergency measure - Eyes: Flush eyes with plenty of water for at least 15 minutes.
Seek medical attention if symptoms persist.
Emergency measure - Skin: Wash skin with soap and plenty of water. Seek medical
attention if symptoms persist.
Emergency measure - Ingestion: Do not induce vomiting. Seek immediate medical attention if
symptoms persist.

Fire-fighting measures

Recommended extinguishing agent: Water spray, dry chemical, foam or carbon dioxide.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon oxides and oxides of
nitrogen).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.


Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards, as
mentioned in section 2.3.00.


Avoid dust formation by damping with water. Absorb spillages
of solutions with a suitable inert material (eg. sand or
soil). Carefully transfer the spillage to waste containers,
or use a sealed industrial vacuum machine.


Containers filled with waste material must be labelled in
the same way as the original substance containers.


Clean the spillage area with water.


Dispose of waste material in accordance with local
regulations by incineration.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN420

Chemical protective clothing to Standard EN368

Eye protection to Standard EN166.



Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling
exposure, be suitable for the purpose, and conform to the
appropriate international or national standards, such as a
dust mask conforming to EN 149: FFP2.



These measures should be regarded as a minimum.

Storage: Store in a cool, dry, well-ventilated area, protected from
moisture, sources of ignition and direct sunlight.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 80 litre fibre drums with a plastic liner.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: None
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known.

Chemical reaction with water: None which is hazardous.

Dust explosion: Under normal conditions of use this material does not
present a significant explosion hazard. However, like most
organic compounds it is combustible and may form a dust
explosion if widely dispersed in air.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery
fromminor spillages or accidental discharge is not
economically or technically feasible, and such waste
material will be disposed of by incineration. In
principle, it may be possible to recover larger spillages
of uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is not
provisionally classified at the VIIC level of supply.


The dust hazard will be minimised by appropriate storage and
handling techniques.

Industry - Possibility of destruction: controlled discharge: Not applicable.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon oxides
and oxides of nitrogen) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Recovery for re-use is not economically feasible.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: End products that have reached the end of their lifespan may
be disposed of by landfill at an authorised tip in
accordance with local regulations.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: None.