Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove person to fresh air. If signs/symptoms develop, get
medical attention.
Emergency measure - Eyes: Immediately flush eyes with large amounts of water for at
least 15 minutes. Get immediate medical attention.
Emergency measure - Skin: Remove contaminated clothing and shoes. Immediately flush
skin with large amounts of water. Get medical

attention. Wash contaminated clothing and clean shoes before
reuse.
Emergency measure - Ingestion: Do not induce vomiting. Give victim two glasses of water.
Never give anything by mouth to an unconscious person. Get
immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Use fire extinguishers with class B extinguishing agents
(e.g., dry chemical, carbon dioxide).

Product arising from burning: Carbon monoxide

Carbon dioxide

Hydrogen Fluoride

Oxides of Nitrogen

Oxides of Sulfur

Toxic Vapor, Gas, Particulate

Product determined by test: N

Protective equipment: Wear full protective equipment (Bunker Gear) and a self-
contained breathing apparatus

(SCBA).

Accidental release measures

Emergency measures in case of spillage: Observe precautions from other sections. Call 3M- HELPS line
(1-800-364-3577) for more information on handling and
managing the spill. Evacuate unprotected and untrained
personnel from hazard area. The spill should be cleaned up
by qualified personnel. Ventilate the area with fresh air.
For large spill, or spills in confined spaces, provide
mechanical ventilation to disperse or exhaust vapors, in
accordance with good industrial hygiene practice. Warning! A
motor could be an ignition source and could cause flammable
gases or vapors in the spill area to burn or explode.
Contain spill. For larger spills, cover drains

and build dikes to prevent entry into sewer systems or
bodies of water. Working from around the edges of the spill
inward, cover with bentonite, vermiculite, or commercially
available inorganic absorbent material. Mix in sufficient
absorbent until it appears dry.

Collect as much of the spilled material as possible. Clean
up residue with water. Place in a metal container approved
for transportation by appropriate authorities. Seal the
container. Dispose of collected material as soon as
possible.

Handling and storage

Handling: Do not breathe thermal decomposition products. Avoid
breathing of vapors, mists or spray. For industrial or
professional use only.

Storage: Store away from acids. Keep container in well-ventilated
area.

Packaging of the substance and or preparation: Product will be packaged in HDPE containers (typically
100mL, 4L, and 20L sizes). Product can be safely packaged
in glass containers as well. Formulated etching & cleaning
solutions will be packaged in high density polyethylene
containers up to 55 gallons.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: Not regulated.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known.

Chemical reaction with water: None.

Dust explosion: Not applicable.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: 621 Precipitation followed by filtration.

Precipitation followed by filtration may be possible for
concentrated solutions but would not likely be effective for
the highly dilute solutions that would result from the
spent solutions described in this notification. Due to it's
high water solubility it is unlikely that the salt would
have much affinity to the common sorption beds used.

Industry - Possibility of neutralisation: Not applicable. Treatment by strong acid would likely cause
dissociation to the parent fluorosulfonamide and NH3. The
parent sulfonamide is less water soluble but is still
soluble in the ppm range and would likely pass through a
carbon bed or other precipitation or adsorption bed.

Industry - Possibility of destruction: controlled discharge: 641 Removal by controlled discharge to a waste water
treatment plant.

Industry - Possibility of destruction - incineration: Not applicable.

Industry - Possibility of destruction - water purification: Not applicable.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not applicable as the substance will not be available for
the public at large.

Public at large - Possibility of neutralisation: Not applicable as the substance will not be available for
the public at large.

Public at large - Possibility of destruction: controlled discharge: Not applicable as the substance will not be available for
the public at large.

Public at large - Possibility of destruction - incineration: Not applicable as the substance will not be available for
the public at large.

Public at large - Possibility of destruction - water purification: Not applicable as the substance will not be available for
the public at large.

Public at large - Possibility of destruction - others: Not applicable as the substance will not be available for
the public at large.