Registration Dossier

Administrative data

First-aid measures

4.1 Description of first aid measures
General advice:
Move out of dangerous area.
Consult a physician.
Show this safety data sheet to the doctor in attendance.
If inhaled:
If breathed in, move person into fresh air.
Consult a physician after significant exposure.
In case of skin contact:
Take off contaminated clothing and shoes immediately.
Rinse immediately with plenty of water.
In case of eye contact:
Rinse with plenty of water.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed:
Clean mouth with water and drink afterwards plenty of water.
Do NOT induce vomiting.
Never give anything by mouth to an unconscious person.
Obtain medical attention.
4.2 Most important symptoms and effects, both acute and delayed
The symptoms and effects are as expected from the hazards as shown in section 2. No specific product related symptoms are known.
Harmful if swallowed.
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically.

Fire-fighting measures

5.1 Extinguishing media
Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Specific hazards during firefighting / Specific hazards arising from the chemical:
CAUTION: reignition may occur.
Supports combustion.
Water spray may be ineffective unless used by experienced firefighters.
Do not allow run-off from fire fighting to enter drains or water courses.
Heating may cause decomposition with release of toxic fumes.
Combustion products:
Fire will produce smoke containing hazardous combustion products (see section 10).
5.3 Advice for firefighters
Special protective equipment for firefighters:
In the event of fire, wear self-contained breathing apparatus.
Further information:
Use water spray to cool unopened containers.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions:
Use personal protective equipment.
Ensure adequate ventilation.
Remove all sources of ignition.
Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
6.2 Environmental precautions
Environmental precautions:
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.
6.3 Methods and materials for containment and cleaning up
Methods for cleaning up / Methods for containment:
Keep wetted with water.
Soak up with inert absorbent material and dispose of as hazardous waste.
Confinement must be avoided.
Never return spills in original containers for re-use.
6.4 Reference to other sections
Additional advice:
For personal protection see section 8.

Handling and storage

7.1 Precautions for safe handling
Advice on safe handling:
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the application area.
Container may be opened only under exhaust ventilation hood.
Open drum carefully as content may be under pressure.
Dispose of rinse water in accordance with local and national regulations.
Advice on protection against fire and explosion:
Use explosion protected equipment.
Avoid formation of aerosol.
Keep away from sources of ignition - No smoking.
No sparking tools should be used.
Keep away from reducing agents (e.g. amines), acids, alkalies and heavy metal compounds (e.g. accelerators, driers, metal soaps).
Do not cut or weld on or near this container even when empty.
Take measures to prevent the build up of electrostatic charge.
Keep away from combustible material.
Temperature class:
It is recommended to use electrical equipment of temperature group T3. However, autoignition can never be excluded.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
No smoking.
Keep in a well-ventilated place.
Electrical installations / working materials must comply with the technological safety standards.
Keep only in original container.
Store away from other materials.
Minimum storage temperature::
Avoid temperatures below: 15 °C
Maximum storage temperature::
40 °C
Other data:
If product freezes or separates, contact Akzo Nobel:
No decomposition if stored and applied as directed.
7.3 Specific end use(s)
Specific use(s):
Consult the technical guidelines for the use of this substance/mixture.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN 3107
Shippingopen allclose all
Special provisions / remarks
Special provisions:
Hazard identification number 539

Inland waterway transport (UN RTDG/ADN(R))

UN number:
UN 3107
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN 3107
Shipping information
Proper shipping name and description:
Chemical name:
Marine pollutant
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN 3107
Shipping information
Proper shipping name and description:
Chemical name:
Special provisions / remarks
Packing instruction 570
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8 Exposure controls
Engineering controls
Explosion proof ventilation recommended.
Effective exhaust ventilation system
Personal protective equipment
Respiratory protection:
In the case of vapour or aerosol formation use a respirator with an approved filter.
Filter A
Hand protection:
Eye protection:
Tightly fitting safety goggles
Skin and body protection:
Protective suit
Hygiene measures:
Handle in accordance with good industrial hygiene and safety practice.
When using do not eat or drink.
When using do not smoke.
Wash hands before breaks and at the end of workday.
Environmental exposure controls
General advice:
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform respective authorities.

Stability and reactivity

10.1 Reactivity
Stable under normal conditions.
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No dangerous reaction known under conditions of normal use.
10.4 Conditions to avoid
Conditions to avoid:
A high degree of confinement must be avoided.
Heat, flames and sparks.
10.5 Incompatible materials
Materials to avoid:
Contact with the following incompatible materials will result in hazardous decomposition:
Acids and bases
Reducing agents
Heavy metals
Do not mix with peroxide accelerators, unless under controlled processing.
Use only stainless steel 316, PP, polyethylene or glass-lined equipment.
For queries regarding the suitability of other materials please contact the supplier.
10.6 Hazardous decomposition products
Hazardous decomposition products:
Isopropyl acetate
3-Hydroxy-1,3-dimethylbutyl acetate
Thermal decomposition:
SADT - (Self accelerating decomposition temperature) is the lowest temperature at which self accelerating decomposition may occur with a substance in the packaging as used in transport. A dangerous self-accelerating decomposition reaction and, under certain circumstances, explosion or fire can be caused by thermal decomposition at and above the SADT. Contact with incompatible substances can cause decomposition below the SADT.
Self-Accelerating decomposition temperature (SADT):
120 °C

Disposal considerations

13.1 Waste treatment methods
The product should not be allowed to enter drains, water courses or the soil.
Do not contaminate ponds, waterways or ditches with chemical or used container.
Hazardous waste
Dispose of contents/container in accordance with local regulation.
Contaminated packaging:
Empty remaining contents.
Dispose of as unused product.
Do not burn, or use a cutting torch on, the empty drum.
Due to the high risk of contamination recycling/recovery is not recommended.
Follow all warnings even after the container is emptied.