Registration Dossier

Administrative data

First-aid measures

Eye contact:
Check for an remove any contact lenses. Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention if symptoms occur.

Skin contact:
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention if symptoms occur.

Inhalation:
Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.

Ingestion:
If swallowed, seek medical advice immediately and show this container or label. Keep person warm and at rest. Do not induce vomiting.

Protection of first aiders:
No action shall be taken involving any personal risk or without suitable training.

Notes to physician:
No specific treatment. Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Fire-fighting measures

Flammability of the product:
In a fire or it heated, a pressure increase will occur and the container may burst.

Extinguishing media:
Suitable - Use an extinguishing agent suitable for the surrounding fire.
Not suitable - Do not use water jet.

Special exposure hazards:
promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.

Hazardous combustion products:
Decomposition products may include the following materials -
carbon dioxide
carbon monoxide
metal oxide/oxides

Special protective equipment for fire-fighters:
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-peice operated in positive pressure mode.

Accidental release measures

Personal Precautions:
No actions shall be taken involving any personal risk or without suitable training. Evacuate surounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Put on appropriate personal protective equipment.

Environmental pecautions:
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform tje relecant authorities if the product has cuased environmental pollution (sewers, waterways, soils or air).

Small spill:
Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill:
Stop leak if without risk. Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Wash spillafe into an effluent treatment plant of proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sande, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations. Dispose of via a licensed waste disposal contractor.

Handling and storage

Handling:
Put on appropriate personal protectivce equipment. Eating drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face beofre eating, drinking and smoking.

Storage:
Store in accodance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contaimination.

Transport information

Land transport (ADR/RID)

UN number:
3082
Proper shipping name and description:
Environmentally hazardous substance, liquid, n.o.s. (Amides, coco, N,N-bis(hydroxyethyl), reaction products with coco monoglycerides and molybdenum oxide)
Chemical name:
Amides, coco, N,N-bis(hydroxyethyl), reaction products with coco monoglycerides and molybdenum oxide
Language:
English
Class:
9
Packaging group:
III
Special Provisions:
Marine Pollutant
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
3082
Proper shipping name and description:
Environmentally hazardous substance, liquid, n.o.s. (Amides, coco, N,N-bis(hydroxyethyl), reaction products with coco monoglycerides and molybdenum oxide)
Chemical name:
Amides, coco, N,N-bis(hydroxyethyl), reaction products with coco monoglycerides and molybdenum oxide
Class:
9
Packaging group:
III
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
3082
Proper shipping name and description:
Environmentally hazardous substance, liquid, n.o.s. (Amides, coco, N,N-bis(hydroxyethyl), reaction products with coco monoglycerides and molybdenum oxide)
Chemical name:
Amides, coco, N,N-bis(hydroxyethyl), reaction products with coco monoglycerides and molybdenum oxide
Class:
9
Packaging group:
III
Remarks
Marine Pollutant
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Technical protection measures
If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use repiratory protective equipment.

2. Organisational protection measures
No special ventilation requirements. Good general ventilation should be sufficient to control worker exposure to airbourne contaminants. If this product contains ingredients with exposure limits, use process enclosures, local exhaust ventilation or other engineeting controls to keep worker exposure below any recommended or statutory limits.

3. Hand protection
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessmnent indicates this is necessary.
Recommended: Protective gloves should be worn under normal conditions.

4. Feet protection
5. Body protection
Personal protective equipment for the body should be selected based on the task being perfgormed and the risks involved and should be approved by a specialist before handling this product.
Recommended: Lab coat.

6. Eye protection
Safety eyewear complying with an approved standard should be used when a risk assessment indicated this is necessary to avoid exposure to liquid splashes, mists or dusts.
Recommended: Safety glasses with side-shields.

7. Respiratory protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
Recommended: Vapour and dust respirator.

8. Environmental exposure controls
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Stability and reactivity

Stability:
The product is stable.

Possibility of hazardous reactions:
Under normal conditions of storage and use, hazardous reactions will not occur.

Hazardous decomposition products:
Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Incompatibility with various substances:
Reactive or incompatible with the following materials -
Oxidising materials.

Flammable in the presence of the following materials or conditions -
Substance could potentially sustain combustion in open flames, however this is unlikely.

Disposal considerations

Disposal should be in accordance with applicable regional, national and local laws and regulations.