Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

4.1 Description of first aid measures
General advice : Move out of dangerous area.
Consult a physician.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.
If inhaled : If unconscious, place in recovery position and get medical
attention immediately.
In case of skin contact : If on skin, rinse well with water.
If on clothes, remove clothes.
Immediate medical treatment is necessary as untreated
wounds from corrosion of the skin heal slowly and with difficulty.
Wash contaminated clothing before reuse.
In case of eye contact : Small amounts splashed into eyes can cause irreversible tissue damage and blindness.
Remove contact lenses.
In the case of contact with eyes, rinse immediately with plenty
of water and seek medical advice.
Continue rinsing eyes during transport to hospital.
Protect unharmed eye.
Keep eye wide open while rinsing.
If swallowed : Clean mouth with water and drink afterwards plenty of water.
Keep respiratory tract clear.
Do NOT induce vomiting.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms : Skin contact may provoke the following symptoms:
corrosive effects
In case of eye contact
Excessive lachrymation
4.3 Indication of any immediate medical attention and special treatment needed

Fire-fighting measures

5.1 Extinguishing media
Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Water mist Water spray jet
Dry chemical
Carbon dioxide (CO2)
Unsuitable extinguishing
: High volume water jet
5.2 Special hazards arising from the substance or mixture
Specific hazards during firefighting
: Do not allow run-off from fire fighting to enter drains or water
Hazardous combustion products
: Hazardous decomposition products due to incomplete combustion
Sulphur oxides
Metal oxides
Nitrogen oxides (NOx)
Sulphuric acid
5.3 Advice for firefighters
Special protective equipment
for firefighters
: No special protective equipment required.
Further information : Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions : Use personal protective equipment.
Evacuate personnel to safe areas.
6.2 Environmental precautions
Environmental precautions : Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up : Neutralize with chalk, alkali solution or ammonia.
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).

6.4 Reference to other sections

Handling and storage

7.1 Precautions for safe handling
Advice on safe handling : Do not breathe vapours/dust.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the application area.
Advice on protection against
fire and explosion
: Normal measures for preventive fire protection.
Hygiene measures : Avoid contact with skin, eyes and clothing. General industrial
hygiene practice. Wash hands before breaks and immediately
after handling the product.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage
areas and containers
: Keep container tightly closed in a dry and well-ventilated
place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Electrical installations / working materials must comply with the technological
safety standards. To maintain product quality, do not store in
heat or direct sunlight.
Advice on common storage : Keep away from strong bases.
Keep away from metals.
Storage class (TRGS 510) : 8B, Non-combustible, corrosive hazardous materials
Further information on storage stability
: Keep in a dry place.
No decomposition if stored and applied as directed.
7.3 Specific end use(s)

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.2 Exposure controls
Engineering measures
Handle only in a place equipped with local exhaust (or other appropriate exhaust).
Personal protective equipment
Eye protection : Wear face-shield and protective suit for abnormal processing
Wear safety glasses with side shields or goggles.
Hand protection
Material : Nitrile rubber
Break through time : 240 min
Glove thickness : 0,38 mm
Manufacturer : Mapa
Skin and body protection : Impervious clothing
Footwear protecting against chemicals
Respiratory protection : In the case of dust or aerosol formation use respirator with an
approved filter.
Filter type : Combined particulates, inorganic and acidic gas/vapour,
ammonia/amines and organic vapour type (ABEK-P)

Stability and reactivity

10.1 Reactivity
10.2 Chemical stability
No decomposition if stored and applied as directed.
10.3 Possibility of hazardous reactions
Hazardous reactions : The product has a corrosive effect on steel and aluminium.
Stable under recommended storage conditions.
10.4 Conditions to avoid
Conditions to avoid : Extremes of temperature and direct sunlight.
10.5 Incompatible materials
Materials to avoid : Strong bases
Alkali metals
Alkaline earth metals
10.6 Hazardous decomposition products

Disposal considerations

13.1 Waste treatment methods
Product : Dispose of in accordance with the European Directives on
waste and hazardous waste.
According to the European Waste Catalogue, Waste Codes
are not product specific, but application specific.
Waste codes should be assigned by the user, preferably in
discussion with the waste disposal authorities.

Do not dispose of waste into sewer.
Do not contaminate ponds, waterways or ditches with chemical or used container.
Send to a licensed waste management company.
Dispose of as hazardous waste in compliance with local and
national regulations.
Contaminated packaging : Empty remaining contents.
Dispose of contaminated packaging as if unused product.
Do not re-use empty containers.