Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove victim to fresh air. Aid breathing if necessary and
seek medical attention.
Emergency measure - Eyes: Immediately flush eyes with plenty of water for at least 15
minutes. Seek medical attention if irritation develops.
Emergency measure - Skin: Wash affected area with soap and water. Seek medical
attention if irritation develops.
Emergency measure - Ingestion: Seek immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water spray and foam extinguishers may be used.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon and nitrogen oxides
and chlorine-containing compounds). However, there is no
experimental evidence to support the anticipated combustion
products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.


Avoid dust formation by damping down with water. Absorb
spillages of solutions with a suitable inert material (eg
sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original containers.


Clean the spillage area with water and detergent.


Dispose of waste material by landfill or incineration in
accordance with local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure by dermal
contact or inhalation.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipmemt should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166


When necessary appropriate respiratory protection should be
used. e.g.a dust mask conforming to EN149 FFP1.


The standards mentioned above should be regarded as a
minimum.

Storage: Store in a dry well-ventilated area.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 3-ply craft paper bag containing 10kg substance.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: None
Transport: Avoid crushing the containers.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None which is hazardous.

Dust explosion: There is a potential dust explosion hazard from this organic
powder.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration or landfill. In principle, it
may be possible to recover larger spillages of
uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is
sensitising to skin and dangerous for the environment.


No chemical treatment is practicable to neutralise the
hazardous properties.


The dust explosion hazard will be minimised by use of
appropriate storage and handling techniques.

Industry - Possibility of destruction: controlled discharge: Not recommended for neat substance or preparations. Printed
paper containing the substance may be disposed of by
landfill at an authorised tip in accordance with local
regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon and
nitrogen oxides and chlorine containing compounds) could be
formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.

Public at large - Possibility of recovery/recycling: Not applicable as the substance will not be made available
to the public.

Public at large - Possibility of neutralisation: Not applicable as the substance will not be made available
to the public.

Public at large - Possibility of destruction: controlled discharge: Not applicable as the substance will not be made available
to the public.

Public at large - Possibility of destruction - incineration: Not applicable as the substance will not be made available
to the public.

Public at large - Possibility of destruction - water purification: Not applicable as the substance will not be made available
to the public.

Public at large - Possibility of destruction - others: Not applicable as the substance will not be made available
to the public.